Werkbroek
In order to get the best out of your radio system we offer a complete range of programming equipment. These can be purchased with just the software or with the interface leads and will allow you to expand the capability of your radio by enabling additional features as well as giving you access to operating frequencies. Programming can be quite complicated so we are able to provide online or telephone assistance to ensure your radios perform as expected. Just call us on +44 [0]1332 363135 and select Option 2 for technical support. Alternatively you can e mail us at [email protected]
-
Werkbroek projob 5530 HEMELSBLAUWSKU: HFPROGBARRETT$ 59.78The HFPROG programming kit is compatible with the 2040 and 2050 transceivers.
-
Werkbroek projob 5531 KAKISKU: PMKN4013MOTOROLA$ 50.26DMR portable radio programming, test and alignment cable. Compatable with the DP3000 portable radio range
-
WERKBROEK FLUO 7295SKU: CPROG-DTExENTEL$ 61.14For updating and changing configurations of the Entel DT series radios use the CPROG-DTEx lead with the appropriate software.
-
WERKBROEK M-WEAR 7293SKU: CSP450ENTEL$ 61.14For powering the Entel DX4 series DMR radios without a standard CNB series battery.
-
Werkbroek projob 5531 DONKER BLAUWSKU: EPROG-DXENTEL$ 50.26USB programming lead suitable for use with the Entel DX4 series radios.
-
Werkbroek projob 5531 GRIJSSKU: HT-CLNENTEL$ 50.26The HT-CLN clone lead is compatible with the Entel HT446 and HT700 series portable radios.
-
Werkbroek projob 5531 GROENSKU: EPROG-HTENTEL$ 50.26Entel HT700 Series 2.0 programming kit. Includes software, programming lead with serial connector.
-
Werkbroek projob 5531 HEMELSBLAUWSKU: HX-CLNENTEL$ 50.26The HX-CLN clone lead is compatible with the Entel HX400 and HX446 series portable radios.
-
Werkbroek projob 5531 ROODSKU: EPROG-RPENTEL$ 50.26Programming lead and software for Entel RP500 Series base station/repeater.
-
Werkbroek projob 5531 ZWARTSKU: T9101606YAESU$ 49.30Programming cable for Yaesu FTA series air band portable radios.
-
Kniestukken projob 9057SKU: PC26HYT$ 8.42The PC26 programming cable is compatible with a range of HYT radios.
-
Werkbroek projob 5530 HEMELSBLAUWSKU: PC25HYT$ 59.78
The PC25 programming cable is compatible with the HYT TC780 and TC3000s/PKTC3600s series portable radios.
-
Werkbroek projob 5531 KAKISKU: PC27HYT$ 50.26
The PC27 programming cable with USB connector is compatible with the HYT TC265s/TC365s radio.
-
WERKBROEK FLUO 7295SKU: CP01HYT$ 61.14
The CP01 cloning cable is compatible with the HYT TC265s/TC365s radio.
-
WERKBROEK M-WEAR 7293SKU: PC23HYT$ 61.14
The PC23 programming cable is compatible with the HYT TC265s/TC365s radio.
-
Werkbroek projob 5531 DONKER BLAUWSKU: PC18HYT$ 50.26
The PC18 programming cable is compatible with the HYT TC3000s/PKTC3600s radios.
-
Werkbroek projob 5531 GRIJSSKU: PC19HYT$ 50.26
The PC19 programming cable is compatible with s range of HYT radios.
-
Werkbroek projob 5531 GROENSKU: CP05HYT$ 50.26
The CP05 cloning cable is compatible with the HYT TC518 and TC610/TC620/TC700/TC700Ex series radios.
-
Werkbroek projob 5531 HEMELSBLAUWSKU: PKTC610HYT$ 50.26
The PKTC610 is compatible with the HYT TC610 radio.
-
Werkbroek projob 5531 ROODSKU: PKTC620HYT$ 50.26
The PKTC620 programming lead and software is compatible with the HYT TC620 radio.
-
Werkbroek projob 5531 ZWARTSKU: PKTC700HYT$ 49.30
The PKTC700 programming kit is compatible with the HYT TC700 radio.
-
Kniestukken projob 9057SKU: CP03HYT$ 8.42
The CP03 cable is compatible with the HYT TC-780 and TC-3000s/TC-3600s series portable radios.
-
Werkbroek projob 5530 HEMELSBLAUWSKU: PKTC700ExHYT$ 59.78
The PKTC700Ex programming kit is compatible with the HYT TC700Ex radio.
-
Werkbroek projob 5531 KAKISKU: PKTM600HYT$ 50.26
The PKTM600 programming kit is compatible with the HYT TM600 and TM610 mobile radios.
-
WERKBROEK FLUO 7295SKU: CP06HYT$ 61.14
The CP06 cloning cable is compatible with the HYT TM600, TM610 and TM800 mobile radios.
-
WERKBROEK M-WEAR 7293SKU: PC21HYT$ 61.14
The PC21 programming cable is compatible with the TR800 base station repeater and TM600/TM610/TM800 mobile radios.
-
Werkbroek projob 5531 DONKER BLAUWSKU: PC24HYT$ 50.26
The HYT PC24 data transmission cable is compatible with the HYT TM800 mobile radio.
-
Werkbroek projob 5531 GRIJSSKU: PKTM800HYT$ 50.26
The PKTM800 programming kit is compatible with the HYT TM800 mobile radio.
-
Werkbroek projob 5531 GROENSKU: PC08HYT$ 50.26
The PC08 universal programming cable is suitable for a range of HYT radios.
-
Werkbroek projob 5531 HEMELSBLAUWSKU: PC155HYTERA$ 50.26
Hytera BP515LF Programming Cable. The PC155 programming cable can be used to reconfigure the Hytera BP515LF and AP515LF portable radios.
-
-
Werkbroek projob 5531 ZWARTSKU: PC79HYTERA$ 49.30
Hytera MD6 Series mobile radio programming lead.
-
Kniestukken projob 9057SKU: PC109HYTERA$ 8.42
Radio programming cable designed for use with the MD615 and MD625 series DMR mobile radios.
-
Werkbroek projob 5530 HEMELSBLAUWSKU: PC43HYTERA$ 59.78
PC43 DB26-Connector dispatching cable
For Hytera MD700 Series Digital Mobile Radios.
-
Werkbroek projob 5531 KAKISKU: PC47HYTERA$ 50.26
PC47 Download and Programming Cable
For Hytera MD700 Series Digital Mobile Radios.
-
WERKBROEK FLUO 7295SKU: BC00004HYTERA$ 61.14
Complete programming kit for the Hytera MD785 DMR mobile radio.
-
WERKBROEK M-WEAR 7293SKU: PC40HYTERA$ 61.14
PC40 Data Transmission Cable (RoHS)
For Hytera MD700 Series Mobile Digital Radio.
-
Werkbroek projob 5531 DONKER BLAUWSKU: PC37HYTERA$ 50.26
PC37 Programming Cable (USB Port) (RoHS)
For Hytera MD700 Series Mobile Digital Radios.
-
Werkbroek projob 5531 GRIJSSKU: SK008HYTERA$ 50.26
Includes programming software and interface lead for Hytera MD785 mobile radios.
-
Werkbroek projob 5531 GROENSKU: PC87HYTERA$ 50.26
Back-to-back Data Cable with Ignition Function (DB26 to DB26), 0.6m Length
-
Werkbroek projob 5531 HEMELSBLAUWSKU: PC91HYTERA$ 50.26
Data Cable (DB26 connector with Ignition and Speaker cable), 3m Length
-
Werkbroek projob 5531 ROODSKU: PC70HYTERA$ 50.26
Data cable for Hytera MD785i DMR mobile radio with a DB26 to DB9 connector. Cable length 1.2 metres.
-
Werkbroek projob 5531 ZWARTSKU: POA108HYTERA$ 49.30
Hytera MD785i DMR mobile radio data cable with DB26 to DB9 male connector. Cable length 1.2 metres.
-
Kniestukken projob 9057SKU: RC07HYTERA$ 8.42
A recording cable terminated at one end by a DB26 connector and RJ11 at the other end. Cable length is 1.2 metres.
-
Werkbroek projob 5530 HEMELSBLAUWSKU: PC85HYTERA$ 59.78
Programming Cable (USB to 10-pin Aviation Connector) (with signal amplification) 1.5m Length
-
Werkbroek projob 5531 KAKISKU: PC80HYTERA$ 50.26
USB to Micro USB programming cable for the Hytera MD785i DMR radio. Cable length is 1.5 metres.
-
WERKBROEK FLUO 7295SKU: PC39HYTERA$ 61.14
Data transmission cable (PEI). Also used for firmware upgrade of the radio mother board.
-
WERKBROEK M-WEAR 7293SKU: PC68HYTERA$ 61.14
An extra long [5 metres] USB data cable for the Hytera MT680 Plus TETRA radio.
-
Werkbroek projob 5531 DONKER BLAUWSKU: PC35HYTERA$ 50.26
USB style programming cable also used for firmware upgrades to the Hytera MT680 Plus radio. Operates via the front panel.
-
Werkbroek projob 5531 GRIJSSKU: SK003HYTERA$ 50.26
Includes the PC69 cable and software.
Suitable for the Hytera PD3 series portable radios.
-
Werkbroek projob 5531 GROENSKU: PC69HYTERA$ 50.26
The PC69 programming lead allows you to change the operating frequencies and other parameters of the PD355 and PD365 digital migration radio.
-
Werkbroek projob 5531 HEMELSBLAUWSKU: SK004HYTERA$ 50.26
Includes the PC76 programming cable and software.
Suitable for the Hytera PD4 and PD5 DMR portable radios.
-
Werkbroek projob 5531 ROODSKU: PC76HYTERA$ 50.26
Connects Hytera PD400 series radios to PC via USB port for programming.
-
Werkbroek projob 5531 ZWARTSKU: SK005HYTERA$ 49.30
Hytera PD5 series programming kit comprising PC63 cable and software.
-
Kniestukken projob 9057SKU: PC63HYTERA$ 8.42
Programming cable for the Hytera PD505 and PD565 digital portable radios.
-
Werkbroek projob 5530 HEMELSBLAUWSKU: SK006HYTERA$ 59.78
Hytera PD6 Series Programming Kit. Includes software and PC45 cable
-
Werkbroek projob 5531 KAKISKU: PC38HYTERA$ 50.26
Connects the radio to a PC to allow programming of the Hytera PD705 and PD785 digital portable radios.
-
WERKBROEK FLUO 7295SKU: SK007HYTERA$ 61.14
For use with The Hytera PD715Ex and PD795Ex ATEX approved portable radios.
Includes software and interface lead.
-
WERKBROEK M-WEAR 7293SKU: PC143HYTERA$ 61.14
Hytera PNC550 Data Cable. USB to Type C. 1 metre length
-
-
-
Werkbroek projob 5531 GROENSKU: PC64HYTERA$ 50.26
PC programming cable for updating configuration of the Hytera PT580H TETRA radio terminal.
-
Werkbroek projob 5531 HEMELSBLAUWSKU: PC36HYTERA$ 50.26
A PC programming cable with virtual USB port for the Hytera PT580H Plus TETRA radio terminal.
-
Werkbroek projob 5531 ROODSKU: PC90HYTERA$ 50.26
A serial to USB adapter cable to allow programming of the Hytera PT580H Plus TETRA radio terminal.
-
Werkbroek projob 5531 ZWARTSKU: PC67HYTERA$ 49.30
USB programming cable for the Hytera PT790Ex I.S TETRA radio terminal.
-
Kniestukken projob 9057SKU: SK009HYTERA$ 8.42
Hytera RD625 programming Kit. Programming kit includes PC75 cable and software. For programming and configuring the RD625 DMR repeater.
-
Werkbroek projob 5530 HEMELSBLAUWSKU: PC75HYTERA$ 59.78
Hytera RD625 programming lead. Order programming software [SK008] separately.
-
Werkbroek projob 5531 KAKISKU: BC00005HYTERA$ 50.26
Programming kit (programming cable PC37 + Disc)for RD96 Series Digital Repeaters.
-
WERKBROEK FLUO 7295SKU: PC49HYTERA$ 61.14
Back to back data cable for RD96 Series Digital Repeaters.
-
-
Werkbroek projob 5531 DONKER BLAUWSKU: PC93HYTERA$ 50.26
The PC93 programming cable allows users to reprogram the Hytera VM685 remote video speaker microphone.
-
Werkbroek projob 5531 GRIJSSKU: BC00008HYTERA$ 50.26
Programming software and lead for the Hytera X1 and X1p covert digital radios.
-
Werkbroek projob 5531 GROENSKU: PC45HYTERA$ 50.26
Programs the Hytera X1e and X1p digital portable radios.
-
Werkbroek projob 5531 HEMELSBLAUWSKU: OPC-592ICOM$ 50.26
The OPC-591 cloning cable adapter requires the OPC478 cloning cable. It is compatible with the ICOM IC-A110 air band and IC-F7000 HF radios.
-
Werkbroek projob 5531 ROODSKU: OPC-1529ICOM$ 50.26
The OPC-1529 connection cable (RS-232C type) is compatible with the ICOM IC-E91 portable radio.
-
Werkbroek projob 5531 ZWARTSKU: OPC-478UCICOM$ 49.30
OPC-478UC USB Cloning Lead USB Port to Radio. Used on most ICOM mobile and portable radios.
-
Kniestukken projob 9057SKU: OPC-1122ICOM$ 8.42
OPC-1122 programming cable for all ICOM mobile radios with an RJ45 8 pin microphone socket.
Suitable for a range of ICOM mobile radios including the IC-F110 and IC-F210 models.
-
Werkbroek projob 5530 HEMELSBLAUWSKU: OPC-822ICOM$ 59.78
ICOM IC-F1610 and IC-F1710 mobile radio interface cable for MAP 27.
-
Werkbroek projob 5531 KAKISKU: OPC-474ICOM$ 50.26
The OPC-474 cloning cable is compatible with a range of ICOM radios.
-
WERKBROEK FLUO 7295SKU: OPC-1862ICOM$ 61.14
USB style programming cable for ICOM IC-F3202DEx and IC-F4202DEx portable radios. Requires CSF3200DEX.001 software supplied separately.
-
WERKBROEK M-WEAR 7293SKU: OPC-1870ICOM$ 61.14
Permits radio data transfer between 2 portable radios including the ICOM IC-F3262D/4262D series portable radios.
-
Werkbroek projob 5531 DONKER BLAUWSKU: OPC-1871ICOM$ 50.26
For transferring date from portable radio to mobile radios. Compatible with ICOM IC-F3262D/4262D series portable radios.
-
Werkbroek projob 5531 GRIJSSKU: OPC-2362ICOM$ 50.26
The OPC-2362 lets you easily transfer radio data from a ICOM IC-F3400D series IDAS portable radio to a ICOM IC-F5400D series IDAS mobile radio.
-
Werkbroek projob 5531 GROENSKU: OPC-1122UICOM$ 50.26
The OPC-1122U USB cloning cable is compatible with the ICOM IC-F5022 mobile radio and IC-FR5100 series base station repeater.
-
Werkbroek projob 5531 HEMELSBLAUWSKU: OPC-966.002ICOM$ 50.26
The OPC-966.002 cloning lead is compatible with a range of ICOM radios.
-
Werkbroek projob 5531 ROODSKU: OPC-2218LUICOM$ 50.26
Suitable for the ICOM IC-F5122DD/6122DD data modem.
-
-
Kniestukken projob 9057SKU: OPC2338ICOM$ 8.42
Change radio parameters and configuration with the OPC2338 programming cable. Requires CSF52D programming software [sold separately].
-
Werkbroek projob 5530 HEMELSBLAUWSKU: OPC-966.001ICOM$ 59.78
The OPC-966.001 serial cloning cable is compatible with the ICOM IC-F61M and IC-F51V series radio.
-
-
-
WERKBROEK M-WEAR 7293SKU: OPC-1655ICOM$ 61.14
The OPC-1655 cable adapter is compatible with the ICOM IC-M33 marine radio. It is for use with the OPC-478/UC cloning cable.
-
Werkbroek projob 5531 DONKER BLAUWSKU: OPC-980ICOM$ 50.26
The OPC-980 cloning cable adapter is compatible with the ICOM IC-GM651, IC-M505 and IC-M603 marine mobile radios.
-
Werkbroek projob 5531 GRIJSSKU: OPC-2382ICOM$ 50.26
ICOM IC-M605E Conversion Cable. The OPC-2382 is a programming conversion cable that is used with the OPC-478UC cable [USB].
-
Werkbroek projob 5531 GROENSKU: OPC-922ICOM$ 50.26
The OPC-922 cloning cable adapter is compatible with the ICOM IC-M71, IC-GM1600E and IC-M90E marine radios.
-
Werkbroek projob 5531 HEMELSBLAUWSKU: CS-R20ICOM$ 50.26
The CS-R20 cloning software is supplied with a USB cloning cable. It is compatible with the ICOM IC-R20 air band radio.
-
Werkbroek projob 5531 ROODSKU: OPC-1402ICOM$ 50.26
Maintenance cable suitable for use with the ICOM IP1000C Advanced Radio system server.
-
Werkbroek projob 5531 ZWARTSKU: KPG-36XMKENWOOD$ 49.30
Programming cable for the Kenwood NX-5200/5300 NXDN/P25 digital portable radios. Requires KPG-D1E programming software.
-
Kniestukken projob 9057SKU: KPG-46XMKENWOOD$ 8.42
Suitable for use with Kenwood NX-5700/NX-5800 multi mode mobile radios. Requires programming software – KPG-D1E [sold separately].
-
Werkbroek projob 5530 HEMELSBLAUWSKU: KPG-46UKENWOOD$ 59.78
Kenwood USB programming lead for the following Kenwood radios:-
– NX-700/NX-800
– NX-720/NX-820
– NXR-710/NXR-810
– TKR-D710/TKR-D810
-
Werkbroek projob 5531 KAKISKU: KPG-46AKENWOOD$ 50.26
The KPG-46A programming kit is compatible with a range of Kenwood mobile radios and base stations.
-
WERKBROEK FLUO 7295SKU: KCT-53UKENWOOD$ 61.14
The KCT-53U serial to USB adapter is compatible with a range of Kenwood radios and base stations and is supplied with drivers.
-
WERKBROEK M-WEAR 7293SKU: KPG-22UKENWOOD$ 61.14
Suitable for programming a range of Kenwood portable radios with the Kenwood 2 pin accessory socket.
-
Werkbroek projob 5531 DONKER BLAUWSKU: KPG-22AKENWOOD$ 50.26
The KPG-22A serial programming cable is compatible with the Kenwood TK-3301, TK-3201, TK-2202 series, TK-2170 series and TK-2302 series portable radios.
-
Werkbroek projob 5531 GRIJSSKU: KPG-186UKENWOOD$ 50.26
Programming lead for use with the Kenwood TK-3601D licence free digital radio.
-
Werkbroek projob 5531 GROENSKU: KPG-36AKENWOOD$ 50.26
Serial programming lead for use with Kenwood TK-D series portable radios. Should be used with KPG-166DM software [sold separately].
-
Werkbroek projob 5531 HEMELSBLAUWSKU: KPG-36UKENWOOD$ 50.26
USB programming cable for Kenwood TK-D series portable radios. Requires KPG-166DM programming software.
-
Werkbroek projob 5531 ROODSKU: PR-SL1000-01MAXON$ 50.26
Programming cable and software suitable for the Maxon SL1000 portable radio.
-
Werkbroek projob 5531 ZWARTSKU: PK-SL1000-02MAXON$ 49.30
Permits radio data to be transferred from radio to radio. Suitable for Maxon SL1000/S5.
-
Kniestukken projob 9057SKU: PRG-G15MIDLAND$ 8.42
Programming kit including software for Midland G18. Required to enable the voice compander and FM radio functions.
-
Werkbroek projob 5530 HEMELSBLAUWSKU: HKKN4027AMOTOROLA$ 59.78
Change the configuration of your Motorola CLPe two way radio with the HKKN4027A cable kit.
-
Werkbroek projob 5531 KAKISKU: HKKN4028AMOTOROLA$ 50.26
Transfer your radio configuration to other Motorola CLPe two way radios with the HKKN4028A cloning cable.
-
WERKBROEK FLUO 7295SKU: FKN8113AMOTOROLA$ 61.14
Suitable for use with the Motorola CM series mobile radio models.
-
WERKBROEK M-WEAR 7293SKU: FKN8096BMOTOROLA$ 61.14
Flash upgrade adapter for Motorola CM140; CM160; CM340; CM360 mobile radios.
-
Werkbroek projob 5531 DONKER BLAUWSKU: RKN4081CMOTOROLA$ 50.26
Avoids the need for the RLN4008 RIB box when programming CM and GM series mobile radios.
-
Werkbroek projob 5531 GRIJSSKU: RKN4083BMOTOROLA$ 50.26
Connects the Motorola CM or GM series mobile radio to the RIB box
-
Werkbroek projob 5531 GROENSKU: PMKN4004MOTOROLA$ 50.26
Suitable for programming Motorola CP040 series portable radios.
-
Werkbroek projob 5531 HEMELSBLAUWSKU: 0180305K08EPPMOTOROLA$ 50.26
Suitable for CP & DP Series radios.
-
Werkbroek projob 5531 ROODSKU: PMKN4003BMOTOROLA$ 50.26
2.5mm connectors – suitable for radio to radio cloning between Motorola CP040 portable radios.
-
Werkbroek projob 5531 ZWARTSKU: 6686533Z01MOTOROLA$ 49.30
Service tool for use with the Motorola CP and DP1000 series portable radios
-
Kniestukken projob 9057SKU: PMKN4072AMOTOROLA$ 8.42
For connection via front microphone socket on Motorola DM series radios.
-
Werkbroek projob 5530 HEMELSBLAUWSKU: PMKN4016BMOTOROLA$ 59.78
For connection to Motorola DM series radios or test box.
-
Werkbroek projob 5531 KAKISKU: PMKN4010BMOTOROLA$ 50.26
For programming Motorola DM series radios via rear facility connector.
-
WERKBROEK FLUO 7295SKU: PMKN4147AMOTOROLA$ 61.14
Connects to the microphone socket on the DM1000 control head for radio programming.
-
WERKBROEK M-WEAR 7293SKU: HKN6184CMOTOROLA$ 61.14
Allows programming of Motorola DM3000 series mobile radios via the microphone socket on the control head.
-
Werkbroek projob 5531 DONKER BLAUWSKU: PMKN4040AMOTOROLA$ 50.26
Telemetry cable suitable for Motorola DP3000 and DP4000 portable radios.
-
Werkbroek projob 5531 GRIJSSKU: PMKN4156AMOTOROLA$ 50.26
Test cable for use with Motorola DP series digital DMR radio models.
-
Werkbroek projob 5531 GROENSKU: 3271133M01MOTOROLA$ 50.26
Used on Motorola DP series digital portable radios to seal the vacuum hose to radio chassis connection.
-
Werkbroek projob 5531 HEMELSBLAUWSKU: 5871134M01MOTOROLA$ 50.26
Connects the vacuum hose to the radio chassis. Compatible with the Motorola DP series portable radios.
Used to re pressure the radio and seal the unit after maintenance.
-
Werkbroek projob 5531 ROODSKU: NTN4265AMOTOROLA$ 50.26
Pressure pump for re pressurising the following Motorola radio series after servicing:-
DP2400; DP2600
DP3400; DP3600
DP4400; DP4600;DP4800
GP344/GP388
-
Werkbroek projob 5531 ZWARTSKU: NLN9839AMOTOROLA$ 49.30
Includes gauge and hose. Order seal and connector separately.
Used with Motorola DP and GP Compact series radios.
-
Kniestukken projob 9057SKU: PMKN4115BMOTOROLA$ 8.42
Programming cable for Motorola DP2400 and DP2600 digital radio models.
-
Werkbroek projob 5530 HEMELSBLAUWSKU: PMKN4071AMOTOROLA$ 59.78
Enables the MOTOTRBO portable radio to be connected to an external non-PC based application.
-
Werkbroek projob 5531 KAKISKU: PMKN4012MOTOROLA$ 50.26
DMR portable radio programming cable, compatable with the DP3000 portable radio range
-
WERKBROEK FLUO 7295SKU: PMKN4117BMOTOROLA$ 61.14
Used when programming the Motorola DP2400; DP2600 and DP3441 compact series radios.
-
WERKBROEK M-WEAR 7293SKU: GTF374CMOTOROLA$ 61.14
Connects the radio to the RIB box for programming the Motorola GM series mobile radios.
-
Werkbroek projob 5531 DONKER BLAUWSKU: 6686119B01MOTOROLA$ 50.26
Designed to help with dismantling the Motorola GM series mobile radios.
-
Werkbroek projob 5531 GRIJSSKU: RKN4074MOTOROLA$ 50.26
Compatible for use with the Motorola Professional range of portable radios. Used with RLN4008 RIB box.
-
Werkbroek projob 5531 GROENSKU: 6680702Z01MOTOROLA$ 50.26
Special dismantling tool used with the Motorola GP series portable radios.
-
Werkbroek projob 5531 HEMELSBLAUWSKU: RKN4075MOTOROLA$ 50.26
Eliminates the need for the RLN4008 RIB box when programming Motorola GP series radios.
-
Werkbroek projob 5531 ROODSKU: RLN4008MOTOROLA$ 50.26
Radio Interface Box [RIB] for use when programming Motorola GP and CP series portable radios.
-
Werkbroek projob 5531 ZWARTSKU: HLN9742DMOTOROLA$ 49.30
Used to flash upgrade the firmware on Motorola GP and GM series radios.
-
Kniestukken projob 9057SKU: EPN4042AMOTOROLA$ 8.42
Powers the radio interface box [RIB] instead of batteries. Used when programming Motorola GP/GM/CP and CM series radios.
-
Werkbroek projob 5530 HEMELSBLAUWSKU: MDJMKN4125AMOTOROLA$ 59.78
Allows you to power the Motorola GP344 or GP388 GP compact series portable radios from an external power supply.
-
Werkbroek projob 5531 KAKISKU: MDJMKN4123MOTOROLA$ 50.26
Programming and test cable for the Motorola GP344 and GP388 radio models.
-
-
WERKBROEK M-WEAR 7293SKU: DDN9957AMOTOROLA$ 61.14
Programming cable suitable for MTR3000 base stations.
-
Werkbroek projob 5531 DONKER BLAUWSKU: PMDN4077ARMOTOROLA$ 50.26
The PMDN4077AR programming cable is compatible with the Motorola P100 series portable radios.
-
Werkbroek projob 5531 GRIJSSKU: PMDN4076ARMOTOROLA$ 50.26
The PMDN4076AR cloning cable is compatible with the Motorola P100 series portable radios.
-
Werkbroek projob 5531 GROENSKU: PMKN4265AMOTOROLA$ 50.26
Motorola R7 Programming Cable. Suitable for configuring the Motorola R7 portable radio. Use with GMVN6241 CPS software.
-
Werkbroek projob 5531 HEMELSBLAUWSKU: PMKN4231AMOTOROLA$ 50.26
Motorola R7 Test/Alignment Cable. A test and alignment cable suitable for use with the Motorola R7 DMR portable radio.
-
Werkbroek projob 5531 ROODSKU: 3080369B72MOTOROLA$ 50.26
Connects RLN4008 RIB to PC for programming GP and CP Series radios
-
Werkbroek projob 5531 ZWARTSKU: PMKN4128AMOTOROLA$ 49.30
Portable programming cable with TTR for the Motorola SL and DP Series of digital portable radios.
-
Kniestukken projob 9057SKU: 30009477001MOTOROLA$ 8.42
Programming and test cable for Motorola SLR5500 base station. Requires programming software [sold separately] – 30009477001
-
Werkbroek projob 5530 HEMELSBLAUWSKU: HKKN4027MOTOROLA$ 59.78
Allows programming of the XT420 and XT460 with the HTML based customer programming software.
-
Werkbroek projob 5531 KAKISKU: HKKN4028MOTOROLA$ 50.26
Allows data to be transferred between radios. Suitable for the XT420 and XT460 PMR446 licence free radios.
-
WERKBROEK FLUO 7295SKU: IXEN4007ARMOTOROLA$ 61.14
The IXEN4007AR USB programming kit is compatible with the Motorola XTNi and XTNiD licence free radios.
-
WERKBROEK M-WEAR 7293SKU: 25-124330-01RMOTOROLA$ 61.14
Motorola programming cable with micro USB. Requires programming software GMVN5141 [sold separately]
-
-
Werkbroek projob 5531 DONKER BLAUWSKU: CX9PPSCOPE$ 50.26
Complete programming kit suitable for the Scope Connexions advanced paging transmitter/encoder.
-
-
-
Scope Pagetek 4 Programming Kit
SKU: PT10PROGSCOPE£26.00Includes programming software and interface lead [USB] to allow you to reconfigure the Scope Pagetek 3 and 4 paging transmitters.
-
Werkbroek projob 5531 HEMELSBLAUWSKU: MAR-600PRLDUSIMOCO$ 50.26
MAR-600PRLDU Mobile Programming Cable for the Simoco SDM610, SDM622 and SDM630 Digital Mobile Radios.
-
-
Werkbroek projob 5531 ZWARTSKU: 7A0D100SZG1SIMOCO$ 49.30
For programming and reconfiguring the Simoco SDM730 Advanced DMR mobile radio.
-
-
Werkbroek projob 5530 HEMELSBLAUWSKU: GA0M500SZG1SIMOCO$ 59.78
Simoco SDP660 Programming lead suitable for use with either the Simoco SDP650 and SDP660 DMR radios or the SRP9170.
-
Werkbroek projob 5531 KAKISKU: 7A0M500SZG1SIMOCO$ 50.26
Simoco SDP750 and SDP760 programming cable. Allows you to reconfigure radio parameters via a PC.
-
WERKBROEK FLUO 7295SKU: MA-PROGSIMOCO$ 61.14
The MA-PROG programming kit is compatible with the Simoco SRM9000 series mobile radio/base station.
-
WERKBROEK M-WEAR 7293SKU: PAR-9180PRLDUSIMOCO$ 61.14
The PAR-9180PRLDU USB programming lead is compatible with the Simoco SRP9000 series portable radios including the SRP9170 and SRP9180 models.
-
Werkbroek projob 5531 DONKER BLAUWSKU: TSF-PROGSIMOCO$ 50.26
The TSF-PROG programming kit is compatible with the Simoco TSFLite and TSF2000 series base stations.
-
Werkbroek projob 5531 GRIJSSKU: MAR-9000PRLDUSIMOCO$ 50.26
Programming lead suitable for the Simoco SRM, TSF and Xfin radio products.
-
Werkbroek projob 5531 GROENSKU: TMAA21-01TAIT$ 50.26
The TMAA21-01 cable socket (DB15) to plug (RJ45) is compatible with the Tait TM8000, TM8000 XB and T-S8107 series mobile radios.
-
Werkbroek projob 5531 HEMELSBLAUWSKU: TMAA20-00TAIT$ 50.26
The TMAA20-00 programming kit is compatible with the Tait TM8000, TM8000 CB and T-S8107 series mobile radios.
-
Werkbroek projob 5531 ROODSKU: TMAA30-03TAIT$ 50.26
The TMAA30-03 adapter connects the RJ45 to the DB15. Compatible with the Tait TM8000, TM8000 XB and T-S8107 series mobile radios.
-
Werkbroek projob 5531 ZWARTSKU: TMAA20-02TAIT$ 49.30
The TMAA20-02 adapter connects the RJ45 to the DB9. Compatible with the Tait TM8000, TM8000 XB and T-S8107 series mobile radios.
-
Kniestukken projob 9057SKU: TMAA21-00TAIT$ 8.42
The TMAA21-00 service kit is compatible with the Tait TM8000, TM8000 XB and T-S8107 series mobile radios. Supplied with product support CD, service manual, programming/calibration leads and radio test unit.
-
Werkbroek projob 5530 HEMELSBLAUWSKU: TMAA20-04TAIT$ 59.78
The TMAA20-04 socket/plug adapter is compatible with the Tait TP8100, TM8000, TM8000 XB and T-S8107 series portable/mobile radios.
-
Werkbroek projob 5531 KAKISKU: T02-00031-0001TAIT$ 50.26
Tait TM81/82/93/TP81/93 Programming & Calibration Kit. Suitable for use with the Tait TP8 analogue, TP9 digital and TM8000 series mobile radios.
-
WERKBROEK FLUO 7295SKU: TPA-SV-006TAIT$ 61.14
The TPA-SV-006 radio programming lead is compatible with the Tait TP8100 series portable radios & TM8000 mobile radios.
-
-
-
-
Werkbroek projob 5531 GROENSKU: TTI-PROGTTI$ 50.26
Complete programming kit for the TTi TX1000U licence free portable radio.
-
Werkbroek projob 5531 HEMELSBLAUWSKU: CB000262A01VERTEX$ 50.26
USB programming lead for the Vertex EVX-S24 digital radio.
Software included.
-
-
Werkbroek projob 5531 ZWARTSKU: CT-27VERTEX$ 49.30
The CT-27 cloning cable is compatible with a range of Yaesu Vertex/Standard portable radios.
-
Kniestukken projob 9057SKU: FIF-12VERTEX$ 8.42
The FIF-12 USB interface adapter and leads is for use with the CT-106 programming cable. Used with various Vertex VX Series portable radios.
-
Werkbroek projob 5530 HEMELSBLAUWSKU: FIF-10AVERTEX$ 59.78
The FIF-10A USB interface cable is for use with the CT-105/106/108 programming cable interface and is compatible with a range of Yaesu Vertex/Standard mobile and portable radios.
-
Werkbroek projob 5531 KAKISKU: SVC-1200VERTEX$ 50.26
The SV-1200 service kit is compatible with the Vertex/Standard VX-1210 transceiver.
-
WERKBROEK FLUO 7295SKU: CT-62/CE-77VERTEX$ 61.14
Complete programming kit for the Vertex VX-1700 HF radio models.
-
-
Werkbroek projob 5531 DONKER BLAUWSKU: CT-104AVERTEX$ 50.26
Also suitable for VX-4100/4200 mobile radios. Connects to FIF-10A
-
Werkbroek projob 5531 GRIJSSKU: CT-126VERTEX$ 50.26
Programming cable suitable for Vertex radios:-
– VX-2100
– VX-2200
– VX-4100
– VX-4200
-
Werkbroek projob 5531 GROENSKU: CT-106VERTEX$ 50.26
The CT-106 programming cable interface is for use with the FIF-10A USB interface adapter and is compatible with a range of Yaesu Vertex/Standard portable radios.
-
Werkbroek projob 5531 HEMELSBLAUWSKU: CT-42VERTEX$ 50.26
The CT-42 programming cable is compatible with a range of Yaesu Vertex/Standard portable radios.
-
-
-
Kniestukken projob 9057SKU: VPL-1VERTEX$ 8.42
The VPL-1 programming kit is compatible with the Yaesu Vertex/Standard VX-4100E series mobile radios.
-
Werkbroek projob 5530 HEMELSBLAUWSKU: CT-153VERTEX$ 59.78
Allows cloning from mobiles to portables via accessory/programming socket. Suitable for Vertex VX-450, VX-454 and VX-459 portable radios.
-
Werkbroek projob 5531 KAKISKU: CT-72VERTEX$ 50.26
The CT-72 radio clone cable is compatible with the Yaesu Vertex/Standard VX-5500 mobile radio.
-
WERKBROEK FLUO 7295SKU: CT-70VERTEX$ 61.14
The CT-70 radio programming cable interface is for use with the CT-29 programming cable PC interface. Compatible with the Yaesu Vertex/Standard VX-5500 mobile radio.
-
WERKBROEK M-WEAR 7293SKU: CT-105VERTEX$ 61.14
The CT-105 programming cable interface is for use with the FIF-10A USB interface adapter and is compatible with the Yaesu Vertex/Standard VX-5500 mobile radio.
-
Werkbroek projob 5531 DONKER BLAUWSKU: VX-VPL-1DVERTEX$ 50.26
The VX-VPL-1D programming kit is compatible with the Yaesu Vertex/Standard VX-7000 and VX-9000 base stations.
-
Werkbroek projob 5531 GRIJSSKU: CT-109VERTEX$ 50.26
The CT-109 programming cable kit is compatible with the Yaesu Vertex/Standard VX-920E series portable radio.
-
Werkbroek projob 5531 GROENSKU: CT-108VERTEX$ 50.26
The CT-108 programming cable interface is for use with the FIF-10A USB interface adapter and is compatible with the Yaesu Vertex/Standard VX-920E series portable radio.
-
Werkbroek projob 5531 HEMELSBLAUWSKU: CT-116VERTEX$ 50.26
The CT-116 radio clone cable is compatible with the Yaesu Vertex/Standard VX-920E series portable radio.
-
Werkbroek projob 5531 ROODSKU: CT-4VERTEX$ 50.26
The CT-4 cloning cable is compatible with the Yaesu Vertex/Standard VX-4100E and VX-2100E series mobile radios.
-
Werkbroek projob 5531 ZWARTSKU: CT-150VERTEX$ 49.30
Connects PC to rear of Vertex VXD series mobile radios and base stations for programming.
-
Kniestukken projob 9057SKU: CT-151VERTEX$ 8.42
For test and alignment of VXD mobile radios/base stations.
Connects PC to rear of radio.