Mf135 Exhaust Parts
In order to get the best out of your radio system we offer a complete range of programming equipment. These can be purchased with just the software or with the interface leads and will allow you to expand the capability of your radio by enabling additional features as well as giving you access to operating frequencies. Programming can be quite complicated so we are able to provide online or telephone assistance to ensure your radios perform as expected. Just call us on +44 [0]1332 363135 and select Option 2 for technical support. Alternatively you can e mail us at [email protected]
-
Eng exhaust manifold 135SKU: HFPROGBARRETT$ 19.84The HFPROG programming kit is compatible with the 2040 and 2050 transceivers.
-
Eng exhaust stud & nut MFSKU: PMKN4013MOTOROLA$ 1.92DMR portable radio programming, test and alignment cable. Compatable with the DP3000 portable radio range
-
Silencer clamp 58 mmSKU: CPROG-DTExENTEL$ 1.94For updating and changing configurations of the Entel DT series radios use the CPROG-DTEx lead with the appropriate software.
-
Eng exhaust manifold 135SKU: CSP450ENTEL$ 19.84
For powering the Entel DX4 series DMR radios without a standard CNB series battery.
-
Eng exhaust stud & nut MFSKU: EPROG-DXENTEL$ 1.92
USB programming lead suitable for use with the Entel DX4 series radios.
-
Silencer clamp 58 mmSKU: HT-CLNENTEL$ 1.94
The HT-CLN clone lead is compatible with the Entel HT446 and HT700 series portable radios.
-
Eng exhaust manifold 135SKU: EPROG-HTENTEL$ 19.84
Entel HT700 Series 2.0 programming kit. Includes software, programming lead with serial connector.
-
Eng exhaust stud & nut MFSKU: HX-CLNENTEL$ 1.92
The HX-CLN clone lead is compatible with the Entel HX400 and HX446 series portable radios.
-
Silencer clamp 58 mmSKU: EPROG-RPENTEL$ 1.94
Programming lead and software for Entel RP500 Series base station/repeater.
-
Eng exhaust manifold 135SKU: T9101606YAESU$ 19.84
Programming cable for Yaesu FTA series air band portable radios.
-
Eng exhaust stud & nut MFSKU: PC26HYT$ 1.92
The PC26 programming cable is compatible with a range of HYT radios.
-
Silencer clamp 58 mmSKU: PC25HYT$ 1.94
The PC25 programming cable is compatible with the HYT TC780 and TC3000s/PKTC3600s series portable radios.
-
Eng exhaust manifold 135SKU: PC27HYT$ 19.84
The PC27 programming cable with USB connector is compatible with the HYT TC265s/TC365s radio.
-
Eng exhaust stud & nut MFSKU: CP01HYT$ 1.92
The CP01 cloning cable is compatible with the HYT TC265s/TC365s radio.
-
Silencer clamp 58 mmSKU: PC23HYT$ 1.94
The PC23 programming cable is compatible with the HYT TC265s/TC365s radio.
-
Eng exhaust manifold 135SKU: PC18HYT$ 19.84
The PC18 programming cable is compatible with the HYT TC3000s/PKTC3600s radios.
-
Eng exhaust stud & nut MFSKU: PC19HYT$ 1.92
The PC19 programming cable is compatible with s range of HYT radios.
-
Silencer clamp 58 mmSKU: CP05HYT$ 1.94
The CP05 cloning cable is compatible with the HYT TC518 and TC610/TC620/TC700/TC700Ex series radios.
-
Eng exhaust manifold 135SKU: PKTC610HYT$ 19.84
The PKTC610 is compatible with the HYT TC610 radio.
-
Eng exhaust stud & nut MFSKU: PKTC620HYT$ 1.92
The PKTC620 programming lead and software is compatible with the HYT TC620 radio.
-
Silencer clamp 58 mmSKU: PKTC700HYT$ 1.94
The PKTC700 programming kit is compatible with the HYT TC700 radio.
-
Eng exhaust manifold 135SKU: CP03HYT$ 19.84
The CP03 cable is compatible with the HYT TC-780 and TC-3000s/TC-3600s series portable radios.
-
Eng exhaust stud & nut MFSKU: PKTC700ExHYT$ 1.92
The PKTC700Ex programming kit is compatible with the HYT TC700Ex radio.
-
Silencer clamp 58 mmSKU: PKTM600HYT$ 1.94
The PKTM600 programming kit is compatible with the HYT TM600 and TM610 mobile radios.
-
Eng exhaust manifold 135SKU: CP06HYT$ 19.84
The CP06 cloning cable is compatible with the HYT TM600, TM610 and TM800 mobile radios.
-
Eng exhaust stud & nut MFSKU: PC21HYT$ 1.92
The PC21 programming cable is compatible with the TR800 base station repeater and TM600/TM610/TM800 mobile radios.
-
Silencer clamp 58 mmSKU: PC24HYT$ 1.94
The HYT PC24 data transmission cable is compatible with the HYT TM800 mobile radio.
-
Eng exhaust manifold 135SKU: PKTM800HYT$ 19.84
The PKTM800 programming kit is compatible with the HYT TM800 mobile radio.
-
Eng exhaust stud & nut MFSKU: PC08HYT$ 1.92
The PC08 universal programming cable is suitable for a range of HYT radios.
-
Silencer clamp 58 mmSKU: PC155HYTERA$ 1.94
Hytera BP515LF Programming Cable. The PC155 programming cable can be used to reconfigure the Hytera BP515LF and AP515LF portable radios.
-
-
-
Silencer clamp 58 mmSKU: PC109HYTERA$ 1.94
Radio programming cable designed for use with the MD615 and MD625 series DMR mobile radios.
-
Eng exhaust manifold 135SKU: PC43HYTERA$ 19.84
PC43 DB26-Connector dispatching cable
For Hytera MD700 Series Digital Mobile Radios.
-
Eng exhaust stud & nut MFSKU: PC47HYTERA$ 1.92
PC47 Download and Programming Cable
For Hytera MD700 Series Digital Mobile Radios.
-
Silencer clamp 58 mmSKU: BC00004HYTERA$ 1.94
Complete programming kit for the Hytera MD785 DMR mobile radio.
-
Eng exhaust manifold 135SKU: PC40HYTERA$ 19.84
PC40 Data Transmission Cable (RoHS)
For Hytera MD700 Series Mobile Digital Radio.
-
Eng exhaust stud & nut MFSKU: PC37HYTERA$ 1.92
PC37 Programming Cable (USB Port) (RoHS)
For Hytera MD700 Series Mobile Digital Radios.
-
Silencer clamp 58 mmSKU: SK008HYTERA$ 1.94
Includes programming software and interface lead for Hytera MD785 mobile radios.
-
Eng exhaust manifold 135SKU: PC87HYTERA$ 19.84
Back-to-back Data Cable with Ignition Function (DB26 to DB26), 0.6m Length
-
Eng exhaust stud & nut MFSKU: PC91HYTERA$ 1.92
Data Cable (DB26 connector with Ignition and Speaker cable), 3m Length
-
Silencer clamp 58 mmSKU: PC70HYTERA$ 1.94
Data cable for Hytera MD785i DMR mobile radio with a DB26 to DB9 connector. Cable length 1.2 metres.
-
Eng exhaust manifold 135SKU: POA108HYTERA$ 19.84
Hytera MD785i DMR mobile radio data cable with DB26 to DB9 male connector. Cable length 1.2 metres.
-
Eng exhaust stud & nut MFSKU: RC07HYTERA$ 1.92
A recording cable terminated at one end by a DB26 connector and RJ11 at the other end. Cable length is 1.2 metres.
-
Silencer clamp 58 mmSKU: PC85HYTERA$ 1.94
Programming Cable (USB to 10-pin Aviation Connector) (with signal amplification) 1.5m Length
-
Eng exhaust manifold 135SKU: PC80HYTERA$ 19.84
USB to Micro USB programming cable for the Hytera MD785i DMR radio. Cable length is 1.5 metres.
-
Eng exhaust stud & nut MFSKU: PC39HYTERA$ 1.92
Data transmission cable (PEI). Also used for firmware upgrade of the radio mother board.
-
Silencer clamp 58 mmSKU: PC68HYTERA$ 1.94
An extra long [5 metres] USB data cable for the Hytera MT680 Plus TETRA radio.
-
Eng exhaust manifold 135SKU: PC35HYTERA$ 19.84
USB style programming cable also used for firmware upgrades to the Hytera MT680 Plus radio. Operates via the front panel.
-
Eng exhaust stud & nut MFSKU: SK003HYTERA$ 1.92
Includes the PC69 cable and software.
Suitable for the Hytera PD3 series portable radios.
-
Silencer clamp 58 mmSKU: PC69HYTERA$ 1.94
The PC69 programming lead allows you to change the operating frequencies and other parameters of the PD355 and PD365 digital migration radio.
-
Eng exhaust manifold 135SKU: SK004HYTERA$ 19.84
Includes the PC76 programming cable and software.
Suitable for the Hytera PD4 and PD5 DMR portable radios.
-
Eng exhaust stud & nut MFSKU: PC76HYTERA$ 1.92
Connects Hytera PD400 series radios to PC via USB port for programming.
-
Silencer clamp 58 mmSKU: SK005HYTERA$ 1.94
Hytera PD5 series programming kit comprising PC63 cable and software.
-
Eng exhaust manifold 135SKU: PC63HYTERA$ 19.84
Programming cable for the Hytera PD505 and PD565 digital portable radios.
-
Eng exhaust stud & nut MFSKU: SK006HYTERA$ 1.92
Hytera PD6 Series Programming Kit. Includes software and PC45 cable
-
Silencer clamp 58 mmSKU: PC38HYTERA$ 1.94
Connects the radio to a PC to allow programming of the Hytera PD705 and PD785 digital portable radios.
-
Eng exhaust manifold 135SKU: SK007HYTERA$ 19.84
For use with The Hytera PD715Ex and PD795Ex ATEX approved portable radios.
Includes software and interface lead.
-
Eng exhaust stud & nut MFSKU: PC143HYTERA$ 1.92
Hytera PNC550 Data Cable. USB to Type C. 1 metre length
-
-
-
Eng exhaust stud & nut MFSKU: PC64HYTERA$ 1.92
PC programming cable for updating configuration of the Hytera PT580H TETRA radio terminal.
-
Silencer clamp 58 mmSKU: PC36HYTERA$ 1.94
A PC programming cable with virtual USB port for the Hytera PT580H Plus TETRA radio terminal.
-
Eng exhaust manifold 135SKU: PC90HYTERA$ 19.84
A serial to USB adapter cable to allow programming of the Hytera PT580H Plus TETRA radio terminal.
-
Eng exhaust stud & nut MFSKU: PC67HYTERA$ 1.92
USB programming cable for the Hytera PT790Ex I.S TETRA radio terminal.
-
Silencer clamp 58 mmSKU: SK009HYTERA$ 1.94
Hytera RD625 programming Kit. Programming kit includes PC75 cable and software. For programming and configuring the RD625 DMR repeater.
-
Eng exhaust manifold 135SKU: PC75HYTERA$ 19.84
Hytera RD625 programming lead. Order programming software [SK008] separately.
-
Eng exhaust stud & nut MFSKU: BC00005HYTERA$ 1.92
Programming kit (programming cable PC37 + Disc)for RD96 Series Digital Repeaters.
-
Silencer clamp 58 mmSKU: PC49HYTERA$ 1.94
Back to back data cable for RD96 Series Digital Repeaters.
-
-
Eng exhaust stud & nut MFSKU: PC93HYTERA$ 1.92
The PC93 programming cable allows users to reprogram the Hytera VM685 remote video speaker microphone.
-
Silencer clamp 58 mmSKU: BC00008HYTERA$ 1.94
Programming software and lead for the Hytera X1 and X1p covert digital radios.
-
Eng exhaust manifold 135SKU: PC45HYTERA$ 19.84
Programs the Hytera X1e and X1p digital portable radios.
-
Eng exhaust stud & nut MFSKU: OPC-592ICOM$ 1.92
The OPC-591 cloning cable adapter requires the OPC478 cloning cable. It is compatible with the ICOM IC-A110 air band and IC-F7000 HF radios.
-
Silencer clamp 58 mmSKU: OPC-1529ICOM$ 1.94
The OPC-1529 connection cable (RS-232C type) is compatible with the ICOM IC-E91 portable radio.
-
Eng exhaust manifold 135SKU: OPC-478UCICOM$ 19.84
OPC-478UC USB Cloning Lead USB Port to Radio. Used on most ICOM mobile and portable radios.
-
Eng exhaust stud & nut MFSKU: OPC-1122ICOM$ 1.92
OPC-1122 programming cable for all ICOM mobile radios with an RJ45 8 pin microphone socket.
Suitable for a range of ICOM mobile radios including the IC-F110 and IC-F210 models.
-
Silencer clamp 58 mmSKU: OPC-822ICOM$ 1.94
ICOM IC-F1610 and IC-F1710 mobile radio interface cable for MAP 27.
-
Eng exhaust manifold 135SKU: OPC-474ICOM$ 19.84
The OPC-474 cloning cable is compatible with a range of ICOM radios.
-
Eng exhaust stud & nut MFSKU: OPC-1862ICOM$ 1.92
USB style programming cable for ICOM IC-F3202DEx and IC-F4202DEx portable radios. Requires CSF3200DEX.001 software supplied separately.
-
Silencer clamp 58 mmSKU: OPC-1870ICOM$ 1.94
Permits radio data transfer between 2 portable radios including the ICOM IC-F3262D/4262D series portable radios.
-
Eng exhaust manifold 135SKU: OPC-1871ICOM$ 19.84
For transferring date from portable radio to mobile radios. Compatible with ICOM IC-F3262D/4262D series portable radios.
-
Eng exhaust stud & nut MFSKU: OPC-2362ICOM$ 1.92
The OPC-2362 lets you easily transfer radio data from a ICOM IC-F3400D series IDAS portable radio to a ICOM IC-F5400D series IDAS mobile radio.
-
Silencer clamp 58 mmSKU: OPC-1122UICOM$ 1.94
The OPC-1122U USB cloning cable is compatible with the ICOM IC-F5022 mobile radio and IC-FR5100 series base station repeater.
-
Eng exhaust manifold 135SKU: OPC-966.002ICOM$ 19.84
The OPC-966.002 cloning lead is compatible with a range of ICOM radios.
-
Eng exhaust stud & nut MFSKU: OPC-2218LUICOM$ 1.92
Suitable for the ICOM IC-F5122DD/6122DD data modem.
-
-
Eng exhaust manifold 135SKU: OPC2338ICOM$ 19.84
Change radio parameters and configuration with the OPC2338 programming cable. Requires CSF52D programming software [sold separately].
-
Eng exhaust stud & nut MFSKU: OPC-966.001ICOM$ 1.92
The OPC-966.001 serial cloning cable is compatible with the ICOM IC-F61M and IC-F51V series radio.
-
-
Eng exhaust manifold 135SKU: CS-M324ICOM$ 19.84
CS-M324 Programming Software and Adapter for IC-M323
-
Eng exhaust stud & nut MFSKU: OPC-1655ICOM$ 1.92
The OPC-1655 cable adapter is compatible with the ICOM IC-M33 marine radio. It is for use with the OPC-478/UC cloning cable.
-
Silencer clamp 58 mmSKU: OPC-980ICOM$ 1.94
The OPC-980 cloning cable adapter is compatible with the ICOM IC-GM651, IC-M505 and IC-M603 marine mobile radios.
-
Eng exhaust manifold 135SKU: OPC-2382ICOM$ 19.84
ICOM IC-M605E Conversion Cable. The OPC-2382 is a programming conversion cable that is used with the OPC-478UC cable [USB].
-
Eng exhaust stud & nut MFSKU: OPC-922ICOM$ 1.92
The OPC-922 cloning cable adapter is compatible with the ICOM IC-M71, IC-GM1600E and IC-M90E marine radios.
-
Silencer clamp 58 mmSKU: CS-R20ICOM$ 1.94
The CS-R20 cloning software is supplied with a USB cloning cable. It is compatible with the ICOM IC-R20 air band radio.
-
Eng exhaust manifold 135SKU: OPC-1402ICOM$ 19.84
Maintenance cable suitable for use with the ICOM IP1000C Advanced Radio system server.
-
Eng exhaust stud & nut MFSKU: KPG-36XMKENWOOD$ 1.92
Programming cable for the Kenwood NX-5200/5300 NXDN/P25 digital portable radios. Requires KPG-D1E programming software.
-
Silencer clamp 58 mmSKU: KPG-46XMKENWOOD$ 1.94
Suitable for use with Kenwood NX-5700/NX-5800 multi mode mobile radios. Requires programming software – KPG-D1E [sold separately].
-
Eng exhaust manifold 135SKU: KPG-46UKENWOOD$ 19.84
Kenwood USB programming lead for the following Kenwood radios:-
– NX-700/NX-800
– NX-720/NX-820
– NXR-710/NXR-810
– TKR-D710/TKR-D810
-
Eng exhaust stud & nut MFSKU: KPG-46AKENWOOD$ 1.92
The KPG-46A programming kit is compatible with a range of Kenwood mobile radios and base stations.
-
Silencer clamp 58 mmSKU: KCT-53UKENWOOD$ 1.94
The KCT-53U serial to USB adapter is compatible with a range of Kenwood radios and base stations and is supplied with drivers.
-
Eng exhaust manifold 135SKU: KPG-22UKENWOOD$ 19.84
Suitable for programming a range of Kenwood portable radios with the Kenwood 2 pin accessory socket.
-
Eng exhaust stud & nut MFSKU: KPG-22AKENWOOD$ 1.92
The KPG-22A serial programming cable is compatible with the Kenwood TK-3301, TK-3201, TK-2202 series, TK-2170 series and TK-2302 series portable radios.
-
Silencer clamp 58 mmSKU: KPG-186UKENWOOD$ 1.94
Programming lead for use with the Kenwood TK-3601D licence free digital radio.
-
Eng exhaust manifold 135SKU: KPG-36AKENWOOD$ 19.84
Serial programming lead for use with Kenwood TK-D series portable radios. Should be used with KPG-166DM software [sold separately].
-
Eng exhaust stud & nut MFSKU: KPG-36UKENWOOD$ 1.92
USB programming cable for Kenwood TK-D series portable radios. Requires KPG-166DM programming software.
-
Silencer clamp 58 mmSKU: PR-SL1000-01MAXON$ 1.94
Programming cable and software suitable for the Maxon SL1000 portable radio.
-
Eng exhaust manifold 135SKU: PK-SL1000-02MAXON$ 19.84
Permits radio data to be transferred from radio to radio. Suitable for Maxon SL1000/S5.
-
Eng exhaust stud & nut MFSKU: PRG-G15MIDLAND$ 1.92
Programming kit including software for Midland G18. Required to enable the voice compander and FM radio functions.
-
Silencer clamp 58 mmSKU: HKKN4027AMOTOROLA$ 1.94
Change the configuration of your Motorola CLPe two way radio with the HKKN4027A cable kit.
-
Eng exhaust manifold 135SKU: HKKN4028AMOTOROLA$ 19.84
Transfer your radio configuration to other Motorola CLPe two way radios with the HKKN4028A cloning cable.
-
Eng exhaust stud & nut MFSKU: FKN8113AMOTOROLA$ 1.92
Suitable for use with the Motorola CM series mobile radio models.
-
Silencer clamp 58 mmSKU: FKN8096BMOTOROLA$ 1.94
Flash upgrade adapter for Motorola CM140; CM160; CM340; CM360 mobile radios.
-
Eng exhaust manifold 135SKU: RKN4081CMOTOROLA$ 19.84
Avoids the need for the RLN4008 RIB box when programming CM and GM series mobile radios.
-
Eng exhaust stud & nut MFSKU: RKN4083BMOTOROLA$ 1.92
Connects the Motorola CM or GM series mobile radio to the RIB box
-
Silencer clamp 58 mmSKU: PMKN4004MOTOROLA$ 1.94
Suitable for programming Motorola CP040 series portable radios.
-
-
Eng exhaust stud & nut MFSKU: PMKN4003BMOTOROLA$ 1.92
2.5mm connectors – suitable for radio to radio cloning between Motorola CP040 portable radios.
-
Silencer clamp 58 mmSKU: 6686533Z01MOTOROLA$ 1.94
Service tool for use with the Motorola CP and DP1000 series portable radios
-
Eng exhaust manifold 135SKU: PMKN4072AMOTOROLA$ 19.84
For connection via front microphone socket on Motorola DM series radios.
-
Eng exhaust stud & nut MFSKU: PMKN4016BMOTOROLA$ 1.92
For connection to Motorola DM series radios or test box.
-
Silencer clamp 58 mmSKU: PMKN4010BMOTOROLA$ 1.94
For programming Motorola DM series radios via rear facility connector.
-
Eng exhaust manifold 135SKU: PMKN4147AMOTOROLA$ 19.84
Connects to the microphone socket on the DM1000 control head for radio programming.
-
Eng exhaust stud & nut MFSKU: HKN6184CMOTOROLA$ 1.92
Allows programming of Motorola DM3000 series mobile radios via the microphone socket on the control head.
-
Silencer clamp 58 mmSKU: PMKN4040AMOTOROLA$ 1.94
Telemetry cable suitable for Motorola DP3000 and DP4000 portable radios.
-
Eng exhaust manifold 135SKU: PMKN4156AMOTOROLA$ 19.84
Test cable for use with Motorola DP series digital DMR radio models.
-
Eng exhaust stud & nut MFSKU: 3271133M01MOTOROLA$ 1.92
Used on Motorola DP series digital portable radios to seal the vacuum hose to radio chassis connection.
-
Silencer clamp 58 mmSKU: 5871134M01MOTOROLA$ 1.94
Connects the vacuum hose to the radio chassis. Compatible with the Motorola DP series portable radios.
Used to re pressure the radio and seal the unit after maintenance.
-
Eng exhaust manifold 135SKU: NTN4265AMOTOROLA$ 19.84
Pressure pump for re pressurising the following Motorola radio series after servicing:-
DP2400; DP2600
DP3400; DP3600
DP4400; DP4600;DP4800
GP344/GP388
-
Eng exhaust stud & nut MFSKU: NLN9839AMOTOROLA$ 1.92
Includes gauge and hose. Order seal and connector separately.
Used with Motorola DP and GP Compact series radios.
-
Silencer clamp 58 mmSKU: PMKN4115BMOTOROLA$ 1.94
Programming cable for Motorola DP2400 and DP2600 digital radio models.
-
Eng exhaust manifold 135SKU: PMKN4071AMOTOROLA$ 19.84
Enables the MOTOTRBO portable radio to be connected to an external non-PC based application.
-
Eng exhaust stud & nut MFSKU: PMKN4012MOTOROLA$ 1.92
DMR portable radio programming cable, compatable with the DP3000 portable radio range
-
Silencer clamp 58 mmSKU: PMKN4117BMOTOROLA$ 1.94
Used when programming the Motorola DP2400; DP2600 and DP3441 compact series radios.
-
Eng exhaust manifold 135SKU: GTF374CMOTOROLA$ 19.84
Connects the radio to the RIB box for programming the Motorola GM series mobile radios.
-
Eng exhaust stud & nut MFSKU: 6686119B01MOTOROLA$ 1.92
Designed to help with dismantling the Motorola GM series mobile radios.
-
Silencer clamp 58 mmSKU: RKN4074MOTOROLA$ 1.94
Compatible for use with the Motorola Professional range of portable radios. Used with RLN4008 RIB box.
-
Eng exhaust manifold 135SKU: 6680702Z01MOTOROLA$ 19.84
Special dismantling tool used with the Motorola GP series portable radios.
-
Eng exhaust stud & nut MFSKU: RKN4075MOTOROLA$ 1.92
Eliminates the need for the RLN4008 RIB box when programming Motorola GP series radios.
-
Silencer clamp 58 mmSKU: RLN4008MOTOROLA$ 1.94
Radio Interface Box [RIB] for use when programming Motorola GP and CP series portable radios.
-
Eng exhaust manifold 135SKU: HLN9742DMOTOROLA$ 19.84
Used to flash upgrade the firmware on Motorola GP and GM series radios.
-
Eng exhaust stud & nut MFSKU: EPN4042AMOTOROLA$ 1.92
Powers the radio interface box [RIB] instead of batteries. Used when programming Motorola GP/GM/CP and CM series radios.
-
Silencer clamp 58 mmSKU: MDJMKN4125AMOTOROLA$ 1.94
Allows you to power the Motorola GP344 or GP388 GP compact series portable radios from an external power supply.
-
Eng exhaust manifold 135SKU: MDJMKN4123MOTOROLA$ 19.84
Programming and test cable for the Motorola GP344 and GP388 radio models.
-
-
Silencer clamp 58 mmSKU: DDN9957AMOTOROLA$ 1.94
Programming cable suitable for MTR3000 base stations.
-
Eng exhaust manifold 135SKU: PMDN4077ARMOTOROLA$ 19.84
The PMDN4077AR programming cable is compatible with the Motorola P100 series portable radios.
-
Eng exhaust stud & nut MFSKU: PMDN4076ARMOTOROLA$ 1.92
The PMDN4076AR cloning cable is compatible with the Motorola P100 series portable radios.
-
Silencer clamp 58 mmSKU: PMKN4265AMOTOROLA$ 1.94
Motorola R7 Programming Cable. Suitable for configuring the Motorola R7 portable radio. Use with GMVN6241 CPS software.
-
Eng exhaust manifold 135SKU: PMKN4231AMOTOROLA$ 19.84
Motorola R7 Test/Alignment Cable. A test and alignment cable suitable for use with the Motorola R7 DMR portable radio.
-
Eng exhaust stud & nut MFSKU: 3080369B72MOTOROLA$ 1.92
Connects RLN4008 RIB to PC for programming GP and CP Series radios
-
Silencer clamp 58 mmSKU: PMKN4128AMOTOROLA$ 1.94
Portable programming cable with TTR for the Motorola SL and DP Series of digital portable radios.
-
Eng exhaust manifold 135SKU: 30009477001MOTOROLA$ 19.84
Programming and test cable for Motorola SLR5500 base station. Requires programming software [sold separately] – 30009477001
-
Eng exhaust stud & nut MFSKU: HKKN4027MOTOROLA$ 1.92
Allows programming of the XT420 and XT460 with the HTML based customer programming software.
-
Silencer clamp 58 mmSKU: HKKN4028MOTOROLA$ 1.94
Allows data to be transferred between radios. Suitable for the XT420 and XT460 PMR446 licence free radios.
-
Eng exhaust manifold 135SKU: IXEN4007ARMOTOROLA$ 19.84
The IXEN4007AR USB programming kit is compatible with the Motorola XTNi and XTNiD licence free radios.
-
Eng exhaust stud & nut MFSKU: 25-124330-01RMOTOROLA$ 1.92
Motorola programming cable with micro USB. Requires programming software GMVN5141 [sold separately]
-
-
Silencer clamp 58 mmSKU: CX9PPSCOPE$ 1.94
Complete programming kit suitable for the Scope Connexions advanced paging transmitter/encoder.
-
-
-
Scope Pagetek 4 Programming Kit
SKU: PT10PROGSCOPE£26.00Includes programming software and interface lead [USB] to allow you to reconfigure the Scope Pagetek 3 and 4 paging transmitters.
-
Silencer clamp 58 mmSKU: MAR-600PRLDUSIMOCO$ 1.94
MAR-600PRLDU Mobile Programming Cable for the Simoco SDM610, SDM622 and SDM630 Digital Mobile Radios.
-
-
Eng exhaust stud & nut MFSKU: 7A0D100SZG1SIMOCO$ 1.92
For programming and reconfiguring the Simoco SDM730 Advanced DMR mobile radio.
-
-
Eng exhaust manifold 135SKU: GA0M500SZG1SIMOCO$ 19.84
Simoco SDP660 Programming lead suitable for use with either the Simoco SDP650 and SDP660 DMR radios or the SRP9170.
-
Eng exhaust stud & nut MFSKU: 7A0M500SZG1SIMOCO$ 1.92
Simoco SDP750 and SDP760 programming cable. Allows you to reconfigure radio parameters via a PC.
-
Silencer clamp 58 mmSKU: MA-PROGSIMOCO$ 1.94
The MA-PROG programming kit is compatible with the Simoco SRM9000 series mobile radio/base station.
-
Eng exhaust manifold 135SKU: PAR-9180PRLDUSIMOCO$ 19.84
The PAR-9180PRLDU USB programming lead is compatible with the Simoco SRP9000 series portable radios including the SRP9170 and SRP9180 models.
-
Eng exhaust stud & nut MFSKU: TSF-PROGSIMOCO$ 1.92
The TSF-PROG programming kit is compatible with the Simoco TSFLite and TSF2000 series base stations.
-
Silencer clamp 58 mmSKU: MAR-9000PRLDUSIMOCO$ 1.94
Programming lead suitable for the Simoco SRM, TSF and Xfin radio products.
-
Eng exhaust manifold 135SKU: TMAA21-01TAIT$ 19.84
The TMAA21-01 cable socket (DB15) to plug (RJ45) is compatible with the Tait TM8000, TM8000 XB and T-S8107 series mobile radios.
-
Eng exhaust stud & nut MFSKU: TMAA20-00TAIT$ 1.92
The TMAA20-00 programming kit is compatible with the Tait TM8000, TM8000 CB and T-S8107 series mobile radios.
-
Silencer clamp 58 mmSKU: TMAA30-03TAIT$ 1.94
The TMAA30-03 adapter connects the RJ45 to the DB15. Compatible with the Tait TM8000, TM8000 XB and T-S8107 series mobile radios.
-
Eng exhaust manifold 135SKU: TMAA20-02TAIT$ 19.84
The TMAA20-02 adapter connects the RJ45 to the DB9. Compatible with the Tait TM8000, TM8000 XB and T-S8107 series mobile radios.
-
Eng exhaust stud & nut MFSKU: TMAA21-00TAIT$ 1.92
The TMAA21-00 service kit is compatible with the Tait TM8000, TM8000 XB and T-S8107 series mobile radios. Supplied with product support CD, service manual, programming/calibration leads and radio test unit.
-
Silencer clamp 58 mmSKU: TMAA20-04TAIT$ 1.94
The TMAA20-04 socket/plug adapter is compatible with the Tait TP8100, TM8000, TM8000 XB and T-S8107 series portable/mobile radios.
-
Eng exhaust manifold 135SKU: T02-00031-0001TAIT$ 19.84
Tait TM81/82/93/TP81/93 Programming & Calibration Kit. Suitable for use with the Tait TP8 analogue, TP9 digital and TM8000 series mobile radios.
-
Eng exhaust stud & nut MFSKU: TPA-SV-006TAIT$ 1.92
The TPA-SV-006 radio programming lead is compatible with the Tait TP8100 series portable radios & TM8000 mobile radios.
-
-
-
-
Silencer clamp 58 mmSKU: TTI-PROGTTI$ 1.94
Complete programming kit for the TTi TX1000U licence free portable radio.
-
Eng exhaust manifold 135SKU: CB000262A01VERTEX$ 19.84
USB programming lead for the Vertex EVX-S24 digital radio.
Software included.
-
-
Silencer clamp 58 mmSKU: CT-27VERTEX$ 1.94
The CT-27 cloning cable is compatible with a range of Yaesu Vertex/Standard portable radios.
-
Eng exhaust manifold 135SKU: FIF-12VERTEX$ 19.84
The FIF-12 USB interface adapter and leads is for use with the CT-106 programming cable. Used with various Vertex VX Series portable radios.
-
Eng exhaust stud & nut MFSKU: FIF-10AVERTEX$ 1.92
The FIF-10A USB interface cable is for use with the CT-105/106/108 programming cable interface and is compatible with a range of Yaesu Vertex/Standard mobile and portable radios.
-
Silencer clamp 58 mmSKU: SVC-1200VERTEX$ 1.94
The SV-1200 service kit is compatible with the Vertex/Standard VX-1210 transceiver.
-
Eng exhaust manifold 135SKU: CT-62/CE-77VERTEX$ 19.84
Complete programming kit for the Vertex VX-1700 HF radio models.
-
-
Silencer clamp 58 mmSKU: CT-104AVERTEX$ 1.94
Also suitable for VX-4100/4200 mobile radios. Connects to FIF-10A
-
Eng exhaust manifold 135SKU: CT-126VERTEX$ 19.84
Programming cable suitable for Vertex radios:-
– VX-2100
– VX-2200
– VX-4100
– VX-4200
-
Eng exhaust stud & nut MFSKU: CT-106VERTEX$ 1.92
The CT-106 programming cable interface is for use with the FIF-10A USB interface adapter and is compatible with a range of Yaesu Vertex/Standard portable radios.
-
Silencer clamp 58 mmSKU: CT-42VERTEX$ 1.94
The CT-42 programming cable is compatible with a range of Yaesu Vertex/Standard portable radios.
-
-
-
Silencer clamp 58 mmSKU: VPL-1VERTEX$ 1.94
The VPL-1 programming kit is compatible with the Yaesu Vertex/Standard VX-4100E series mobile radios.
-
Eng exhaust manifold 135SKU: CT-153VERTEX$ 19.84
Allows cloning from mobiles to portables via accessory/programming socket. Suitable for Vertex VX-450, VX-454 and VX-459 portable radios.
-
Eng exhaust stud & nut MFSKU: CT-72VERTEX$ 1.92
The CT-72 radio clone cable is compatible with the Yaesu Vertex/Standard VX-5500 mobile radio.
-
Silencer clamp 58 mmSKU: CT-70VERTEX$ 1.94
The CT-70 radio programming cable interface is for use with the CT-29 programming cable PC interface. Compatible with the Yaesu Vertex/Standard VX-5500 mobile radio.
-
Eng exhaust manifold 135SKU: CT-105VERTEX$ 19.84
The CT-105 programming cable interface is for use with the FIF-10A USB interface adapter and is compatible with the Yaesu Vertex/Standard VX-5500 mobile radio.
-
Eng exhaust stud & nut MFSKU: VX-VPL-1DVERTEX$ 1.92
The VX-VPL-1D programming kit is compatible with the Yaesu Vertex/Standard VX-7000 and VX-9000 base stations.
-
Silencer clamp 58 mmSKU: CT-109VERTEX$ 1.94
The CT-109 programming cable kit is compatible with the Yaesu Vertex/Standard VX-920E series portable radio.
-
Eng exhaust manifold 135SKU: CT-108VERTEX$ 19.84
The CT-108 programming cable interface is for use with the FIF-10A USB interface adapter and is compatible with the Yaesu Vertex/Standard VX-920E series portable radio.
-
Eng exhaust stud & nut MFSKU: CT-116VERTEX$ 1.92
The CT-116 radio clone cable is compatible with the Yaesu Vertex/Standard VX-920E series portable radio.
-
Silencer clamp 58 mmSKU: CT-4VERTEX$ 1.94
The CT-4 cloning cable is compatible with the Yaesu Vertex/Standard VX-4100E and VX-2100E series mobile radios.
-
Eng exhaust manifold 135SKU: CT-150VERTEX$ 19.84
Connects PC to rear of Vertex VXD series mobile radios and base stations for programming.
-
Eng exhaust stud & nut MFSKU: CT-151VERTEX$ 1.92
For test and alignment of VXD mobile radios/base stations.
Connects PC to rear of radio.