Hydraulic Motors
In order to get the best out of your radio system we offer a complete range of programming equipment. These can be purchased with just the software or with the interface leads and will allow you to expand the capability of your radio by enabling additional features as well as giving you access to operating frequencies. Programming can be quite complicated so we are able to provide online or telephone assistance to ensure your radios perform as expected. Just call us on +44 [0]1332 363135 and select Option 2 for technical support. Alternatively you can e mail us at [email protected]
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: HFPROGBARRETT$ 97.12The HFPROG programming kit is compatible with the 2040 and 2050 transceivers.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: PMKN4013MOTOROLA$ 99.84DMR portable radio programming, test and alignment cable. Compatable with the DP3000 portable radio range
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: CPROG-DTExENTEL$ 97.12
For updating and changing configurations of the Entel DT series radios use the CPROG-DTEx lead with the appropriate software.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: CSP450ENTEL$ 99.84
For powering the Entel DX4 series DMR radios without a standard CNB series battery.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: EPROG-DXENTEL$ 97.12
USB programming lead suitable for use with the Entel DX4 series radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: HT-CLNENTEL$ 99.84
The HT-CLN clone lead is compatible with the Entel HT446 and HT700 series portable radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: EPROG-HTENTEL$ 97.12
Entel HT700 Series 2.0 programming kit. Includes software, programming lead with serial connector.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: HX-CLNENTEL$ 99.84
The HX-CLN clone lead is compatible with the Entel HX400 and HX446 series portable radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: EPROG-RPENTEL$ 97.12
Programming lead and software for Entel RP500 Series base station/repeater.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: T9101606YAESU$ 99.84
Programming cable for Yaesu FTA series air band portable radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: PC26HYT$ 97.12
The PC26 programming cable is compatible with a range of HYT radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: PC25HYT$ 99.84
The PC25 programming cable is compatible with the HYT TC780 and TC3000s/PKTC3600s series portable radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: PC27HYT$ 97.12
The PC27 programming cable with USB connector is compatible with the HYT TC265s/TC365s radio.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: CP01HYT$ 99.84
The CP01 cloning cable is compatible with the HYT TC265s/TC365s radio.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: PC23HYT$ 97.12
The PC23 programming cable is compatible with the HYT TC265s/TC365s radio.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: PC18HYT$ 99.84
The PC18 programming cable is compatible with the HYT TC3000s/PKTC3600s radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: PC19HYT$ 97.12
The PC19 programming cable is compatible with s range of HYT radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: CP05HYT$ 99.84
The CP05 cloning cable is compatible with the HYT TC518 and TC610/TC620/TC700/TC700Ex series radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: PKTC610HYT$ 97.12
The PKTC610 is compatible with the HYT TC610 radio.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: PKTC620HYT$ 99.84
The PKTC620 programming lead and software is compatible with the HYT TC620 radio.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: PKTC700HYT$ 97.12
The PKTC700 programming kit is compatible with the HYT TC700 radio.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: CP03HYT$ 99.84
The CP03 cable is compatible with the HYT TC-780 and TC-3000s/TC-3600s series portable radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: PKTC700ExHYT$ 97.12
The PKTC700Ex programming kit is compatible with the HYT TC700Ex radio.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: PKTM600HYT$ 99.84
The PKTM600 programming kit is compatible with the HYT TM600 and TM610 mobile radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: CP06HYT$ 97.12
The CP06 cloning cable is compatible with the HYT TM600, TM610 and TM800 mobile radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: PC21HYT$ 99.84
The PC21 programming cable is compatible with the TR800 base station repeater and TM600/TM610/TM800 mobile radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: PC24HYT$ 97.12
The HYT PC24 data transmission cable is compatible with the HYT TM800 mobile radio.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: PKTM800HYT$ 99.84
The PKTM800 programming kit is compatible with the HYT TM800 mobile radio.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: PC08HYT$ 97.12
The PC08 universal programming cable is suitable for a range of HYT radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: PC155HYTERA$ 99.84
Hytera BP515LF Programming Cable. The PC155 programming cable can be used to reconfigure the Hytera BP515LF and AP515LF portable radios.
-
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: PC79HYTERA$ 99.84
Hytera MD6 Series mobile radio programming lead.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: PC109HYTERA$ 97.12
Radio programming cable designed for use with the MD615 and MD625 series DMR mobile radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: PC43HYTERA$ 99.84
PC43 DB26-Connector dispatching cable
For Hytera MD700 Series Digital Mobile Radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: PC47HYTERA$ 97.12
PC47 Download and Programming Cable
For Hytera MD700 Series Digital Mobile Radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: BC00004HYTERA$ 99.84
Complete programming kit for the Hytera MD785 DMR mobile radio.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: PC40HYTERA$ 97.12
PC40 Data Transmission Cable (RoHS)
For Hytera MD700 Series Mobile Digital Radio.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: PC37HYTERA$ 99.84
PC37 Programming Cable (USB Port) (RoHS)
For Hytera MD700 Series Mobile Digital Radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: SK008HYTERA$ 97.12
Includes programming software and interface lead for Hytera MD785 mobile radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: PC87HYTERA$ 99.84
Back-to-back Data Cable with Ignition Function (DB26 to DB26), 0.6m Length
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: PC91HYTERA$ 97.12
Data Cable (DB26 connector with Ignition and Speaker cable), 3m Length
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: PC70HYTERA$ 99.84
Data cable for Hytera MD785i DMR mobile radio with a DB26 to DB9 connector. Cable length 1.2 metres.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: POA108HYTERA$ 97.12
Hytera MD785i DMR mobile radio data cable with DB26 to DB9 male connector. Cable length 1.2 metres.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: RC07HYTERA$ 99.84
A recording cable terminated at one end by a DB26 connector and RJ11 at the other end. Cable length is 1.2 metres.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: PC85HYTERA$ 97.12
Programming Cable (USB to 10-pin Aviation Connector) (with signal amplification) 1.5m Length
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: PC80HYTERA$ 99.84
USB to Micro USB programming cable for the Hytera MD785i DMR radio. Cable length is 1.5 metres.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: PC39HYTERA$ 97.12
Data transmission cable (PEI). Also used for firmware upgrade of the radio mother board.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: PC68HYTERA$ 99.84
An extra long [5 metres] USB data cable for the Hytera MT680 Plus TETRA radio.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: PC35HYTERA$ 97.12
USB style programming cable also used for firmware upgrades to the Hytera MT680 Plus radio. Operates via the front panel.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: SK003HYTERA$ 99.84
Includes the PC69 cable and software.
Suitable for the Hytera PD3 series portable radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: PC69HYTERA$ 97.12
The PC69 programming lead allows you to change the operating frequencies and other parameters of the PD355 and PD365 digital migration radio.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: SK004HYTERA$ 99.84
Includes the PC76 programming cable and software.
Suitable for the Hytera PD4 and PD5 DMR portable radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: PC76HYTERA$ 97.12
Connects Hytera PD400 series radios to PC via USB port for programming.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: SK005HYTERA$ 99.84
Hytera PD5 series programming kit comprising PC63 cable and software.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: PC63HYTERA$ 97.12
Programming cable for the Hytera PD505 and PD565 digital portable radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: SK006HYTERA$ 99.84
Hytera PD6 Series Programming Kit. Includes software and PC45 cable
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: PC38HYTERA$ 97.12
Connects the radio to a PC to allow programming of the Hytera PD705 and PD785 digital portable radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: SK007HYTERA$ 99.84
For use with The Hytera PD715Ex and PD795Ex ATEX approved portable radios.
Includes software and interface lead.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: PC143HYTERA$ 97.12
Hytera PNC550 Data Cable. USB to Type C. 1 metre length
-
-
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: PC64HYTERA$ 99.84
PC programming cable for updating configuration of the Hytera PT580H TETRA radio terminal.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: PC36HYTERA$ 97.12
A PC programming cable with virtual USB port for the Hytera PT580H Plus TETRA radio terminal.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: PC90HYTERA$ 99.84
A serial to USB adapter cable to allow programming of the Hytera PT580H Plus TETRA radio terminal.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: PC67HYTERA$ 97.12
USB programming cable for the Hytera PT790Ex I.S TETRA radio terminal.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: SK009HYTERA$ 99.84
Hytera RD625 programming Kit. Programming kit includes PC75 cable and software. For programming and configuring the RD625 DMR repeater.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: PC75HYTERA$ 97.12
Hytera RD625 programming lead. Order programming software [SK008] separately.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: BC00005HYTERA$ 99.84
Programming kit (programming cable PC37 + Disc)for RD96 Series Digital Repeaters.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: PC49HYTERA$ 97.12
Back to back data cable for RD96 Series Digital Repeaters.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: PC30HYTERA$ 99.84
Programming Cable with USB Connector.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: PC93HYTERA$ 97.12
The PC93 programming cable allows users to reprogram the Hytera VM685 remote video speaker microphone.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: BC00008HYTERA$ 99.84
Programming software and lead for the Hytera X1 and X1p covert digital radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: PC45HYTERA$ 97.12
Programs the Hytera X1e and X1p digital portable radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: OPC-592ICOM$ 99.84
The OPC-591 cloning cable adapter requires the OPC478 cloning cable. It is compatible with the ICOM IC-A110 air band and IC-F7000 HF radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: OPC-1529ICOM$ 97.12
The OPC-1529 connection cable (RS-232C type) is compatible with the ICOM IC-E91 portable radio.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: OPC-478UCICOM$ 99.84
OPC-478UC USB Cloning Lead USB Port to Radio. Used on most ICOM mobile and portable radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: OPC-1122ICOM$ 97.12
OPC-1122 programming cable for all ICOM mobile radios with an RJ45 8 pin microphone socket.
Suitable for a range of ICOM mobile radios including the IC-F110 and IC-F210 models.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: OPC-822ICOM$ 99.84
ICOM IC-F1610 and IC-F1710 mobile radio interface cable for MAP 27.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: OPC-474ICOM$ 97.12
The OPC-474 cloning cable is compatible with a range of ICOM radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: OPC-1862ICOM$ 99.84
USB style programming cable for ICOM IC-F3202DEx and IC-F4202DEx portable radios. Requires CSF3200DEX.001 software supplied separately.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: OPC-1870ICOM$ 97.12
Permits radio data transfer between 2 portable radios including the ICOM IC-F3262D/4262D series portable radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: OPC-1871ICOM$ 99.84
For transferring date from portable radio to mobile radios. Compatible with ICOM IC-F3262D/4262D series portable radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: OPC-2362ICOM$ 97.12
The OPC-2362 lets you easily transfer radio data from a ICOM IC-F3400D series IDAS portable radio to a ICOM IC-F5400D series IDAS mobile radio.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: OPC-1122UICOM$ 99.84
The OPC-1122U USB cloning cable is compatible with the ICOM IC-F5022 mobile radio and IC-FR5100 series base station repeater.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: OPC-966.002ICOM$ 97.12
The OPC-966.002 cloning lead is compatible with a range of ICOM radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: OPC-2218LUICOM$ 99.84
Suitable for the ICOM IC-F5122DD/6122DD data modem.
-
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: OPC2338ICOM$ 99.84
Change radio parameters and configuration with the OPC2338 programming cable. Requires CSF52D programming software [sold separately].
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: OPC-966.001ICOM$ 97.12
The OPC-966.001 serial cloning cable is compatible with the ICOM IC-F61M and IC-F51V series radio.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: OPC-2091ICOM$ 99.84
OPC-2091 Cloning Cable Adapter for IC-M23
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: CS-M324ICOM$ 97.12
CS-M324 Programming Software and Adapter for IC-M323
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: OPC-1655ICOM$ 99.84
The OPC-1655 cable adapter is compatible with the ICOM IC-M33 marine radio. It is for use with the OPC-478/UC cloning cable.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: OPC-980ICOM$ 97.12
The OPC-980 cloning cable adapter is compatible with the ICOM IC-GM651, IC-M505 and IC-M603 marine mobile radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: OPC-2382ICOM$ 99.84
ICOM IC-M605E Conversion Cable. The OPC-2382 is a programming conversion cable that is used with the OPC-478UC cable [USB].
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: OPC-922ICOM$ 97.12
The OPC-922 cloning cable adapter is compatible with the ICOM IC-M71, IC-GM1600E and IC-M90E marine radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: CS-R20ICOM$ 99.84
The CS-R20 cloning software is supplied with a USB cloning cable. It is compatible with the ICOM IC-R20 air band radio.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: OPC-1402ICOM$ 97.12
Maintenance cable suitable for use with the ICOM IP1000C Advanced Radio system server.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: KPG-36XMKENWOOD$ 99.84
Programming cable for the Kenwood NX-5200/5300 NXDN/P25 digital portable radios. Requires KPG-D1E programming software.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: KPG-46XMKENWOOD$ 97.12
Suitable for use with Kenwood NX-5700/NX-5800 multi mode mobile radios. Requires programming software – KPG-D1E [sold separately].
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: KPG-46UKENWOOD$ 99.84
Kenwood USB programming lead for the following Kenwood radios:-
– NX-700/NX-800
– NX-720/NX-820
– NXR-710/NXR-810
– TKR-D710/TKR-D810
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: KPG-46AKENWOOD$ 97.12
The KPG-46A programming kit is compatible with a range of Kenwood mobile radios and base stations.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: KCT-53UKENWOOD$ 99.84
The KCT-53U serial to USB adapter is compatible with a range of Kenwood radios and base stations and is supplied with drivers.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: KPG-22UKENWOOD$ 97.12
Suitable for programming a range of Kenwood portable radios with the Kenwood 2 pin accessory socket.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: KPG-22AKENWOOD$ 99.84
The KPG-22A serial programming cable is compatible with the Kenwood TK-3301, TK-3201, TK-2202 series, TK-2170 series and TK-2302 series portable radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: KPG-186UKENWOOD$ 97.12
Programming lead for use with the Kenwood TK-3601D licence free digital radio.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: KPG-36AKENWOOD$ 99.84
Serial programming lead for use with Kenwood TK-D series portable radios. Should be used with KPG-166DM software [sold separately].
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: KPG-36UKENWOOD$ 97.12
USB programming cable for Kenwood TK-D series portable radios. Requires KPG-166DM programming software.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: PR-SL1000-01MAXON$ 99.84
Programming cable and software suitable for the Maxon SL1000 portable radio.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: PK-SL1000-02MAXON$ 97.12
Permits radio data to be transferred from radio to radio. Suitable for Maxon SL1000/S5.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: PRG-G15MIDLAND$ 99.84
Programming kit including software for Midland G18. Required to enable the voice compander and FM radio functions.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: HKKN4027AMOTOROLA$ 97.12
Change the configuration of your Motorola CLPe two way radio with the HKKN4027A cable kit.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: HKKN4028AMOTOROLA$ 99.84
Transfer your radio configuration to other Motorola CLPe two way radios with the HKKN4028A cloning cable.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: FKN8113AMOTOROLA$ 97.12
Suitable for use with the Motorola CM series mobile radio models.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: FKN8096BMOTOROLA$ 99.84
Flash upgrade adapter for Motorola CM140; CM160; CM340; CM360 mobile radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: RKN4081CMOTOROLA$ 97.12
Avoids the need for the RLN4008 RIB box when programming CM and GM series mobile radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: RKN4083BMOTOROLA$ 99.84
Connects the Motorola CM or GM series mobile radio to the RIB box
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: PMKN4004MOTOROLA$ 97.12
Suitable for programming Motorola CP040 series portable radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: 0180305K08EPPMOTOROLA$ 99.84
Suitable for CP & DP Series radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: PMKN4003BMOTOROLA$ 97.12
2.5mm connectors – suitable for radio to radio cloning between Motorola CP040 portable radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: 6686533Z01MOTOROLA$ 99.84
Service tool for use with the Motorola CP and DP1000 series portable radios
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: PMKN4072AMOTOROLA$ 97.12
For connection via front microphone socket on Motorola DM series radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: PMKN4016BMOTOROLA$ 99.84
For connection to Motorola DM series radios or test box.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: PMKN4010BMOTOROLA$ 97.12
For programming Motorola DM series radios via rear facility connector.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: PMKN4147AMOTOROLA$ 99.84
Connects to the microphone socket on the DM1000 control head for radio programming.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: HKN6184CMOTOROLA$ 97.12
Allows programming of Motorola DM3000 series mobile radios via the microphone socket on the control head.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: PMKN4040AMOTOROLA$ 99.84
Telemetry cable suitable for Motorola DP3000 and DP4000 portable radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: PMKN4156AMOTOROLA$ 97.12
Test cable for use with Motorola DP series digital DMR radio models.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: 3271133M01MOTOROLA$ 99.84
Used on Motorola DP series digital portable radios to seal the vacuum hose to radio chassis connection.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: 5871134M01MOTOROLA$ 97.12
Connects the vacuum hose to the radio chassis. Compatible with the Motorola DP series portable radios.
Used to re pressure the radio and seal the unit after maintenance.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: NTN4265AMOTOROLA$ 99.84
Pressure pump for re pressurising the following Motorola radio series after servicing:-
DP2400; DP2600
DP3400; DP3600
DP4400; DP4600;DP4800
GP344/GP388
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: NLN9839AMOTOROLA$ 97.12
Includes gauge and hose. Order seal and connector separately.
Used with Motorola DP and GP Compact series radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: PMKN4115BMOTOROLA$ 99.84
Programming cable for Motorola DP2400 and DP2600 digital radio models.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: PMKN4071AMOTOROLA$ 97.12
Enables the MOTOTRBO portable radio to be connected to an external non-PC based application.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: PMKN4012MOTOROLA$ 99.84
DMR portable radio programming cable, compatable with the DP3000 portable radio range
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: PMKN4117BMOTOROLA$ 97.12
Used when programming the Motorola DP2400; DP2600 and DP3441 compact series radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: GTF374CMOTOROLA$ 99.84
Connects the radio to the RIB box for programming the Motorola GM series mobile radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: 6686119B01MOTOROLA$ 97.12
Designed to help with dismantling the Motorola GM series mobile radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: RKN4074MOTOROLA$ 99.84
Compatible for use with the Motorola Professional range of portable radios. Used with RLN4008 RIB box.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: 6680702Z01MOTOROLA$ 97.12
Special dismantling tool used with the Motorola GP series portable radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: RKN4075MOTOROLA$ 99.84
Eliminates the need for the RLN4008 RIB box when programming Motorola GP series radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: RLN4008MOTOROLA$ 97.12
Radio Interface Box [RIB] for use when programming Motorola GP and CP series portable radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: HLN9742DMOTOROLA$ 99.84
Used to flash upgrade the firmware on Motorola GP and GM series radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: EPN4042AMOTOROLA$ 97.12
Powers the radio interface box [RIB] instead of batteries. Used when programming Motorola GP/GM/CP and CM series radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: MDJMKN4125AMOTOROLA$ 99.84
Allows you to power the Motorola GP344 or GP388 GP compact series portable radios from an external power supply.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: MDJMKN4123MOTOROLA$ 97.12
Programming and test cable for the Motorola GP344 and GP388 radio models.
-
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: DDN9957AMOTOROLA$ 97.12
Programming cable suitable for MTR3000 base stations.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: PMDN4077ARMOTOROLA$ 99.84
The PMDN4077AR programming cable is compatible with the Motorola P100 series portable radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: PMDN4076ARMOTOROLA$ 97.12
The PMDN4076AR cloning cable is compatible with the Motorola P100 series portable radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: PMKN4265AMOTOROLA$ 99.84
Motorola R7 Programming Cable. Suitable for configuring the Motorola R7 portable radio. Use with GMVN6241 CPS software.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: PMKN4231AMOTOROLA$ 97.12
Motorola R7 Test/Alignment Cable. A test and alignment cable suitable for use with the Motorola R7 DMR portable radio.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: 3080369B72MOTOROLA$ 99.84
Connects RLN4008 RIB to PC for programming GP and CP Series radios
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: PMKN4128AMOTOROLA$ 97.12
Portable programming cable with TTR for the Motorola SL and DP Series of digital portable radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: 30009477001MOTOROLA$ 99.84
Programming and test cable for Motorola SLR5500 base station. Requires programming software [sold separately] – 30009477001
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: HKKN4027MOTOROLA$ 97.12
Allows programming of the XT420 and XT460 with the HTML based customer programming software.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: HKKN4028MOTOROLA$ 99.84
Allows data to be transferred between radios. Suitable for the XT420 and XT460 PMR446 licence free radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: IXEN4007ARMOTOROLA$ 97.12
The IXEN4007AR USB programming kit is compatible with the Motorola XTNi and XTNiD licence free radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: 25-124330-01RMOTOROLA$ 99.84
Motorola programming cable with micro USB. Requires programming software GMVN5141 [sold separately]
-
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: CX9PPSCOPE$ 97.12
Complete programming kit suitable for the Scope Connexions advanced paging transmitter/encoder.
-
-
-
Scope Pagetek 4 Programming Kit
SKU: PT10PROGSCOPE£26.00Includes programming software and interface lead [USB] to allow you to reconfigure the Scope Pagetek 3 and 4 paging transmitters.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: MAR-600PRLDUSIMOCO$ 99.84
MAR-600PRLDU Mobile Programming Cable for the Simoco SDM610, SDM622 and SDM630 Digital Mobile Radios.
-
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: 7A0D100SZG1SIMOCO$ 99.84
For programming and reconfiguring the Simoco SDM730 Advanced DMR mobile radio.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: 5A0DS00SZG1SIMOCO$ 97.12
Simoco SDP560 Programming Lead
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: GA0M500SZG1SIMOCO$ 99.84
Simoco SDP660 Programming lead suitable for use with either the Simoco SDP650 and SDP660 DMR radios or the SRP9170.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: 7A0M500SZG1SIMOCO$ 97.12
Simoco SDP750 and SDP760 programming cable. Allows you to reconfigure radio parameters via a PC.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: MA-PROGSIMOCO$ 99.84
The MA-PROG programming kit is compatible with the Simoco SRM9000 series mobile radio/base station.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: PAR-9180PRLDUSIMOCO$ 97.12
The PAR-9180PRLDU USB programming lead is compatible with the Simoco SRP9000 series portable radios including the SRP9170 and SRP9180 models.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: TSF-PROGSIMOCO$ 99.84
The TSF-PROG programming kit is compatible with the Simoco TSFLite and TSF2000 series base stations.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: MAR-9000PRLDUSIMOCO$ 97.12
Programming lead suitable for the Simoco SRM, TSF and Xfin radio products.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: TMAA21-01TAIT$ 99.84
The TMAA21-01 cable socket (DB15) to plug (RJ45) is compatible with the Tait TM8000, TM8000 XB and T-S8107 series mobile radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: TMAA20-00TAIT$ 97.12
The TMAA20-00 programming kit is compatible with the Tait TM8000, TM8000 CB and T-S8107 series mobile radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: TMAA30-03TAIT$ 99.84
The TMAA30-03 adapter connects the RJ45 to the DB15. Compatible with the Tait TM8000, TM8000 XB and T-S8107 series mobile radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: TMAA20-02TAIT$ 97.12
The TMAA20-02 adapter connects the RJ45 to the DB9. Compatible with the Tait TM8000, TM8000 XB and T-S8107 series mobile radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: TMAA21-00TAIT$ 99.84
The TMAA21-00 service kit is compatible with the Tait TM8000, TM8000 XB and T-S8107 series mobile radios. Supplied with product support CD, service manual, programming/calibration leads and radio test unit.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: TMAA20-04TAIT$ 97.12
The TMAA20-04 socket/plug adapter is compatible with the Tait TP8100, TM8000, TM8000 XB and T-S8107 series portable/mobile radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: T02-00031-0001TAIT$ 99.84
Tait TM81/82/93/TP81/93 Programming & Calibration Kit. Suitable for use with the Tait TP8 analogue, TP9 digital and TM8000 series mobile radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: TPA-SV-006TAIT$ 97.12
The TPA-SV-006 radio programming lead is compatible with the Tait TP8100 series portable radios & TM8000 mobile radios.
-
-
-
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: TTI-PROGTTI$ 97.12
Complete programming kit for the TTi TX1000U licence free portable radio.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: CB000262A01VERTEX$ 99.84
USB programming lead for the Vertex EVX-S24 digital radio.
Software included.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: CT-124AVERTEX$ 97.12
CT-124A Vertex VX 410 Flash ROM Lead
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: CT-27VERTEX$ 99.84
The CT-27 cloning cable is compatible with a range of Yaesu Vertex/Standard portable radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: FIF-12VERTEX$ 97.12
The FIF-12 USB interface adapter and leads is for use with the CT-106 programming cable. Used with various Vertex VX Series portable radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: FIF-10AVERTEX$ 99.84
The FIF-10A USB interface cable is for use with the CT-105/106/108 programming cable interface and is compatible with a range of Yaesu Vertex/Standard mobile and portable radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: SVC-1200VERTEX$ 97.12
The SV-1200 service kit is compatible with the Vertex/Standard VX-1210 transceiver.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: CT-62/CE-77VERTEX$ 99.84
Complete programming kit for the Vertex VX-1700 HF radio models.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: CT-62VERTEX$ 97.12
CT-62 Programming Cable for VX-1700
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: CT-104AVERTEX$ 99.84
Also suitable for VX-4100/4200 mobile radios. Connects to FIF-10A
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: CT-126VERTEX$ 97.12
Programming cable suitable for Vertex radios:-
– VX-2100
– VX-2200
– VX-4100
– VX-4200
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: CT-106VERTEX$ 99.84
The CT-106 programming cable interface is for use with the FIF-10A USB interface adapter and is compatible with a range of Yaesu Vertex/Standard portable radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: CT-42VERTEX$ 97.12
The CT-42 programming cable is compatible with a range of Yaesu Vertex/Standard portable radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: CT-124BVERTEX$ 99.84
CT-124B Vertex VX-410 Firmware Update Lead
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: FIF-8VERTEX$ 97.12
FIF-8 Vertex VX-410 Flash ROM Writer
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: VPL-1VERTEX$ 99.84
The VPL-1 programming kit is compatible with the Yaesu Vertex/Standard VX-4100E series mobile radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: CT-153VERTEX$ 97.12
Allows cloning from mobiles to portables via accessory/programming socket. Suitable for Vertex VX-450, VX-454 and VX-459 portable radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: CT-72VERTEX$ 99.84
The CT-72 radio clone cable is compatible with the Yaesu Vertex/Standard VX-5500 mobile radio.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: CT-70VERTEX$ 97.12
The CT-70 radio programming cable interface is for use with the CT-29 programming cable PC interface. Compatible with the Yaesu Vertex/Standard VX-5500 mobile radio.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: CT-105VERTEX$ 99.84
The CT-105 programming cable interface is for use with the FIF-10A USB interface adapter and is compatible with the Yaesu Vertex/Standard VX-5500 mobile radio.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: VX-VPL-1DVERTEX$ 97.12
The VX-VPL-1D programming kit is compatible with the Yaesu Vertex/Standard VX-7000 and VX-9000 base stations.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: CT-109VERTEX$ 99.84
The CT-109 programming cable kit is compatible with the Yaesu Vertex/Standard VX-920E series portable radio.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: CT-108VERTEX$ 97.12
The CT-108 programming cable interface is for use with the FIF-10A USB interface adapter and is compatible with the Yaesu Vertex/Standard VX-920E series portable radio.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: CT-116VERTEX$ 99.84
The CT-116 radio clone cable is compatible with the Yaesu Vertex/Standard VX-920E series portable radio.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: CT-4VERTEX$ 97.12
The CT-4 cloning cable is compatible with the Yaesu Vertex/Standard VX-4100E and VX-2100E series mobile radios.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-400-St.Shaft)SKU: CT-150VERTEX$ 99.84
Connects PC to rear of Vertex VXD series mobile radios and base stations for programming.
-
DANFOSS HYDRAULIC MOTOR 2 BOLT MOUNTING (OMH-315-St.Shaft)SKU: CT-151VERTEX$ 97.12
For test and alignment of VXD mobile radios/base stations.
Connects PC to rear of radio.