Mf 165 Steering
In order to get the best out of your radio system we offer a complete range of programming equipment. These can be purchased with just the software or with the interface leads and will allow you to expand the capability of your radio by enabling additional features as well as giving you access to operating frequencies. Programming can be quite complicated so we are able to provide online or telephone assistance to ensure your radios perform as expected. Just call us on +44 [0]1332 363135 and select Option 2 for technical support. Alternatively you can e mail us at [email protected]
-
Diff rear wheel nut 165/188SKU: HFPROGBARRETT$ 1.04The HFPROG programming kit is compatible with the 2040 and 2050 transceivers.
-
Diff rear wheel stud 165/188SKU: PMKN4013MOTOROLA$ 1.39DMR portable radio programming, test and alignment cable. Compatable with the DP3000 portable radio range
-
Front wheel stud 165SKU: CPROG-DTExENTEL$ 1.03For updating and changing configurations of the Entel DT series radios use the CPROG-DTEx lead with the appropriate software.
-
Steeing tie rod outer LH MF65SKU: CSP450ENTEL$ 19.92For powering the Entel DX4 series DMR radios without a standard CNB series battery.
-
Steering box assy 165SKU: EPROG-DXENTEL$ 93.65USB programming lead suitable for use with the Entel DX4 series radios.
-
Steering box oil seal 165SKU: HT-CLNENTEL$ 1.08The HT-CLN clone lead is compatible with the Entel HT446 and HT700 series portable radios.
-
Steering draglink 188SKU: EPROG-HTENTEL$ 40.96Entel HT700 Series 2.0 programming kit. Includes software, programming lead with serial connector.
-
Steering shaft brass bush 165SKU: HX-CLNENTEL$ 1.64The HX-CLN clone lead is compatible with the Entel HX400 and HX446 series portable radios.
-
Steering shaft BRG 165SKU: EPROG-RPENTEL$ 10.75Programming lead and software for Entel RP500 Series base station/repeater.
-
Diff rear wheel nut 165/188SKU: T9101606YAESU$ 1.04
Programming cable for Yaesu FTA series air band portable radios.
-
Diff rear wheel stud 165/188SKU: PC26HYT$ 1.39
The PC26 programming cable is compatible with a range of HYT radios.
-
Front wheel stud 165SKU: PC25HYT$ 1.03
The PC25 programming cable is compatible with the HYT TC780 and TC3000s/PKTC3600s series portable radios.
-
Steeing tie rod outer LH MF65SKU: PC27HYT$ 19.92
The PC27 programming cable with USB connector is compatible with the HYT TC265s/TC365s radio.
-
Steering box assy 165SKU: CP01HYT$ 93.65
The CP01 cloning cable is compatible with the HYT TC265s/TC365s radio.
-
Steering box oil seal 165SKU: PC23HYT$ 1.08
The PC23 programming cable is compatible with the HYT TC265s/TC365s radio.
-
Steering draglink 188SKU: PC18HYT$ 40.96
The PC18 programming cable is compatible with the HYT TC3000s/PKTC3600s radios.
-
Steering shaft brass bush 165SKU: PC19HYT$ 1.64
The PC19 programming cable is compatible with s range of HYT radios.
-
Steering shaft BRG 165SKU: CP05HYT$ 10.75
The CP05 cloning cable is compatible with the HYT TC518 and TC610/TC620/TC700/TC700Ex series radios.
-
Diff rear wheel nut 165/188SKU: PKTC610HYT$ 1.04
The PKTC610 is compatible with the HYT TC610 radio.
-
Diff rear wheel stud 165/188SKU: PKTC620HYT$ 1.39
The PKTC620 programming lead and software is compatible with the HYT TC620 radio.
-
Front wheel stud 165SKU: PKTC700HYT$ 1.03
The PKTC700 programming kit is compatible with the HYT TC700 radio.
-
Steeing tie rod outer LH MF65SKU: CP03HYT$ 19.92
The CP03 cable is compatible with the HYT TC-780 and TC-3000s/TC-3600s series portable radios.
-
Steering box assy 165SKU: PKTC700ExHYT$ 93.65
The PKTC700Ex programming kit is compatible with the HYT TC700Ex radio.
-
Steering box oil seal 165SKU: PKTM600HYT$ 1.08
The PKTM600 programming kit is compatible with the HYT TM600 and TM610 mobile radios.
-
Steering draglink 188SKU: CP06HYT$ 40.96
The CP06 cloning cable is compatible with the HYT TM600, TM610 and TM800 mobile radios.
-
Steering shaft brass bush 165SKU: PC21HYT$ 1.64
The PC21 programming cable is compatible with the TR800 base station repeater and TM600/TM610/TM800 mobile radios.
-
Steering shaft BRG 165SKU: PC24HYT$ 10.75
The HYT PC24 data transmission cable is compatible with the HYT TM800 mobile radio.
-
Diff rear wheel nut 165/188SKU: PKTM800HYT$ 1.04
The PKTM800 programming kit is compatible with the HYT TM800 mobile radio.
-
Diff rear wheel stud 165/188SKU: PC08HYT$ 1.39
The PC08 universal programming cable is suitable for a range of HYT radios.
-
Front wheel stud 165SKU: PC155HYTERA$ 1.03
Hytera BP515LF Programming Cable. The PC155 programming cable can be used to reconfigure the Hytera BP515LF and AP515LF portable radios.
-
-
-
Steering box oil seal 165SKU: PC109HYTERA$ 1.08
Radio programming cable designed for use with the MD615 and MD625 series DMR mobile radios.
-
Steering draglink 188SKU: PC43HYTERA$ 40.96
PC43 DB26-Connector dispatching cable
For Hytera MD700 Series Digital Mobile Radios.
-
Steering shaft brass bush 165SKU: PC47HYTERA$ 1.64
PC47 Download and Programming Cable
For Hytera MD700 Series Digital Mobile Radios.
-
Steering shaft BRG 165SKU: BC00004HYTERA$ 10.75
Complete programming kit for the Hytera MD785 DMR mobile radio.
-
Diff rear wheel nut 165/188SKU: PC40HYTERA$ 1.04
PC40 Data Transmission Cable (RoHS)
For Hytera MD700 Series Mobile Digital Radio.
-
Diff rear wheel stud 165/188SKU: PC37HYTERA$ 1.39
PC37 Programming Cable (USB Port) (RoHS)
For Hytera MD700 Series Mobile Digital Radios.
-
Front wheel stud 165SKU: SK008HYTERA$ 1.03
Includes programming software and interface lead for Hytera MD785 mobile radios.
-
Steeing tie rod outer LH MF65SKU: PC87HYTERA$ 19.92
Back-to-back Data Cable with Ignition Function (DB26 to DB26), 0.6m Length
-
Steering box assy 165SKU: PC91HYTERA$ 93.65
Data Cable (DB26 connector with Ignition and Speaker cable), 3m Length
-
Steering box oil seal 165SKU: PC70HYTERA$ 1.08
Data cable for Hytera MD785i DMR mobile radio with a DB26 to DB9 connector. Cable length 1.2 metres.
-
Steering draglink 188SKU: POA108HYTERA$ 40.96
Hytera MD785i DMR mobile radio data cable with DB26 to DB9 male connector. Cable length 1.2 metres.
-
Steering shaft brass bush 165SKU: RC07HYTERA$ 1.64
A recording cable terminated at one end by a DB26 connector and RJ11 at the other end. Cable length is 1.2 metres.
-
Steering shaft BRG 165SKU: PC85HYTERA$ 10.75
Programming Cable (USB to 10-pin Aviation Connector) (with signal amplification) 1.5m Length
-
Diff rear wheel nut 165/188SKU: PC80HYTERA$ 1.04
USB to Micro USB programming cable for the Hytera MD785i DMR radio. Cable length is 1.5 metres.
-
Diff rear wheel stud 165/188SKU: PC39HYTERA$ 1.39
Data transmission cable (PEI). Also used for firmware upgrade of the radio mother board.
-
Front wheel stud 165SKU: PC68HYTERA$ 1.03
An extra long [5 metres] USB data cable for the Hytera MT680 Plus TETRA radio.
-
Steeing tie rod outer LH MF65SKU: PC35HYTERA$ 19.92
USB style programming cable also used for firmware upgrades to the Hytera MT680 Plus radio. Operates via the front panel.
-
Steering box assy 165SKU: SK003HYTERA$ 93.65
Includes the PC69 cable and software.
Suitable for the Hytera PD3 series portable radios.
-
Steering box oil seal 165SKU: PC69HYTERA$ 1.08
The PC69 programming lead allows you to change the operating frequencies and other parameters of the PD355 and PD365 digital migration radio.
-
Steering draglink 188SKU: SK004HYTERA$ 40.96
Includes the PC76 programming cable and software.
Suitable for the Hytera PD4 and PD5 DMR portable radios.
-
Steering shaft brass bush 165SKU: PC76HYTERA$ 1.64
Connects Hytera PD400 series radios to PC via USB port for programming.
-
Steering shaft BRG 165SKU: SK005HYTERA$ 10.75
Hytera PD5 series programming kit comprising PC63 cable and software.
-
Diff rear wheel nut 165/188SKU: PC63HYTERA$ 1.04
Programming cable for the Hytera PD505 and PD565 digital portable radios.
-
Diff rear wheel stud 165/188SKU: SK006HYTERA$ 1.39
Hytera PD6 Series Programming Kit. Includes software and PC45 cable
-
Front wheel stud 165SKU: PC38HYTERA$ 1.03
Connects the radio to a PC to allow programming of the Hytera PD705 and PD785 digital portable radios.
-
Steeing tie rod outer LH MF65SKU: SK007HYTERA$ 19.92
For use with The Hytera PD715Ex and PD795Ex ATEX approved portable radios.
Includes software and interface lead.
-
Steering box assy 165SKU: PC143HYTERA$ 93.65
Hytera PNC550 Data Cable. USB to Type C. 1 metre length
-
-
-
Steering shaft brass bush 165SKU: PC64HYTERA$ 1.64
PC programming cable for updating configuration of the Hytera PT580H TETRA radio terminal.
-
Steering shaft BRG 165SKU: PC36HYTERA$ 10.75
A PC programming cable with virtual USB port for the Hytera PT580H Plus TETRA radio terminal.
-
Diff rear wheel nut 165/188SKU: PC90HYTERA$ 1.04
A serial to USB adapter cable to allow programming of the Hytera PT580H Plus TETRA radio terminal.
-
Diff rear wheel stud 165/188SKU: PC67HYTERA$ 1.39
USB programming cable for the Hytera PT790Ex I.S TETRA radio terminal.
-
Front wheel stud 165SKU: SK009HYTERA$ 1.03
Hytera RD625 programming Kit. Programming kit includes PC75 cable and software. For programming and configuring the RD625 DMR repeater.
-
Steeing tie rod outer LH MF65SKU: PC75HYTERA$ 19.92
Hytera RD625 programming lead. Order programming software [SK008] separately.
-
Steering box assy 165SKU: BC00005HYTERA$ 93.65
Programming kit (programming cable PC37 + Disc)for RD96 Series Digital Repeaters.
-
Steering box oil seal 165SKU: PC49HYTERA$ 1.08
Back to back data cable for RD96 Series Digital Repeaters.
-
-
Steering shaft brass bush 165SKU: PC93HYTERA$ 1.64
The PC93 programming cable allows users to reprogram the Hytera VM685 remote video speaker microphone.
-
Steering shaft BRG 165SKU: BC00008HYTERA$ 10.75
Programming software and lead for the Hytera X1 and X1p covert digital radios.
-
Diff rear wheel nut 165/188SKU: PC45HYTERA$ 1.04
Programs the Hytera X1e and X1p digital portable radios.
-
Diff rear wheel stud 165/188SKU: OPC-592ICOM$ 1.39
The OPC-591 cloning cable adapter requires the OPC478 cloning cable. It is compatible with the ICOM IC-A110 air band and IC-F7000 HF radios.
-
Front wheel stud 165SKU: OPC-1529ICOM$ 1.03
The OPC-1529 connection cable (RS-232C type) is compatible with the ICOM IC-E91 portable radio.
-
Steeing tie rod outer LH MF65SKU: OPC-478UCICOM$ 19.92
OPC-478UC USB Cloning Lead USB Port to Radio. Used on most ICOM mobile and portable radios.
-
Steering box assy 165SKU: OPC-1122ICOM$ 93.65
OPC-1122 programming cable for all ICOM mobile radios with an RJ45 8 pin microphone socket.
Suitable for a range of ICOM mobile radios including the IC-F110 and IC-F210 models.
-
Steering box oil seal 165SKU: OPC-822ICOM$ 1.08
ICOM IC-F1610 and IC-F1710 mobile radio interface cable for MAP 27.
-
Steering draglink 188SKU: OPC-474ICOM$ 40.96
The OPC-474 cloning cable is compatible with a range of ICOM radios.
-
Steering shaft brass bush 165SKU: OPC-1862ICOM$ 1.64
USB style programming cable for ICOM IC-F3202DEx and IC-F4202DEx portable radios. Requires CSF3200DEX.001 software supplied separately.
-
Steering shaft BRG 165SKU: OPC-1870ICOM$ 10.75
Permits radio data transfer between 2 portable radios including the ICOM IC-F3262D/4262D series portable radios.
-
Diff rear wheel nut 165/188SKU: OPC-1871ICOM$ 1.04
For transferring date from portable radio to mobile radios. Compatible with ICOM IC-F3262D/4262D series portable radios.
-
Diff rear wheel stud 165/188SKU: OPC-2362ICOM$ 1.39
The OPC-2362 lets you easily transfer radio data from a ICOM IC-F3400D series IDAS portable radio to a ICOM IC-F5400D series IDAS mobile radio.
-
Front wheel stud 165SKU: OPC-1122UICOM$ 1.03
The OPC-1122U USB cloning cable is compatible with the ICOM IC-F5022 mobile radio and IC-FR5100 series base station repeater.
-
Steeing tie rod outer LH MF65SKU: OPC-966.002ICOM$ 19.92
The OPC-966.002 cloning lead is compatible with a range of ICOM radios.
-
Steering box assy 165SKU: OPC-2218LUICOM$ 93.65
Suitable for the ICOM IC-F5122DD/6122DD data modem.
-
-
Steering draglink 188SKU: OPC2338ICOM$ 40.96
Change radio parameters and configuration with the OPC2338 programming cable. Requires CSF52D programming software [sold separately].
-
Steering shaft brass bush 165SKU: OPC-966.001ICOM$ 1.64
The OPC-966.001 serial cloning cable is compatible with the ICOM IC-F61M and IC-F51V series radio.
-
-
Diff rear wheel nut 165/188SKU: CS-M324ICOM$ 1.04
CS-M324 Programming Software and Adapter for IC-M323
-
Diff rear wheel stud 165/188SKU: OPC-1655ICOM$ 1.39
The OPC-1655 cable adapter is compatible with the ICOM IC-M33 marine radio. It is for use with the OPC-478/UC cloning cable.
-
Front wheel stud 165SKU: OPC-980ICOM$ 1.03
The OPC-980 cloning cable adapter is compatible with the ICOM IC-GM651, IC-M505 and IC-M603 marine mobile radios.
-
Steeing tie rod outer LH MF65SKU: OPC-2382ICOM$ 19.92
ICOM IC-M605E Conversion Cable. The OPC-2382 is a programming conversion cable that is used with the OPC-478UC cable [USB].
-
Steering box assy 165SKU: OPC-922ICOM$ 93.65
The OPC-922 cloning cable adapter is compatible with the ICOM IC-M71, IC-GM1600E and IC-M90E marine radios.
-
Steering box oil seal 165SKU: CS-R20ICOM$ 1.08
The CS-R20 cloning software is supplied with a USB cloning cable. It is compatible with the ICOM IC-R20 air band radio.
-
Steering draglink 188SKU: OPC-1402ICOM$ 40.96
Maintenance cable suitable for use with the ICOM IP1000C Advanced Radio system server.
-
Steering shaft brass bush 165SKU: KPG-36XMKENWOOD$ 1.64
Programming cable for the Kenwood NX-5200/5300 NXDN/P25 digital portable radios. Requires KPG-D1E programming software.
-
Steering shaft BRG 165SKU: KPG-46XMKENWOOD$ 10.75
Suitable for use with Kenwood NX-5700/NX-5800 multi mode mobile radios. Requires programming software – KPG-D1E [sold separately].
-
Diff rear wheel nut 165/188SKU: KPG-46UKENWOOD$ 1.04
Kenwood USB programming lead for the following Kenwood radios:-
– NX-700/NX-800
– NX-720/NX-820
– NXR-710/NXR-810
– TKR-D710/TKR-D810
-
Diff rear wheel stud 165/188SKU: KPG-46AKENWOOD$ 1.39
The KPG-46A programming kit is compatible with a range of Kenwood mobile radios and base stations.
-
Front wheel stud 165SKU: KCT-53UKENWOOD$ 1.03
The KCT-53U serial to USB adapter is compatible with a range of Kenwood radios and base stations and is supplied with drivers.
-
Steeing tie rod outer LH MF65SKU: KPG-22UKENWOOD$ 19.92
Suitable for programming a range of Kenwood portable radios with the Kenwood 2 pin accessory socket.
-
Steering box assy 165SKU: KPG-22AKENWOOD$ 93.65
The KPG-22A serial programming cable is compatible with the Kenwood TK-3301, TK-3201, TK-2202 series, TK-2170 series and TK-2302 series portable radios.
-
Steering box oil seal 165SKU: KPG-186UKENWOOD$ 1.08
Programming lead for use with the Kenwood TK-3601D licence free digital radio.
-
Steering draglink 188SKU: KPG-36AKENWOOD$ 40.96
Serial programming lead for use with Kenwood TK-D series portable radios. Should be used with KPG-166DM software [sold separately].
-
Steering shaft brass bush 165SKU: KPG-36UKENWOOD$ 1.64
USB programming cable for Kenwood TK-D series portable radios. Requires KPG-166DM programming software.
-
Steering shaft BRG 165SKU: PR-SL1000-01MAXON$ 10.75
Programming cable and software suitable for the Maxon SL1000 portable radio.
-
Diff rear wheel nut 165/188SKU: PK-SL1000-02MAXON$ 1.04
Permits radio data to be transferred from radio to radio. Suitable for Maxon SL1000/S5.
-
Diff rear wheel stud 165/188SKU: PRG-G15MIDLAND$ 1.39
Programming kit including software for Midland G18. Required to enable the voice compander and FM radio functions.
-
Front wheel stud 165SKU: HKKN4027AMOTOROLA$ 1.03
Change the configuration of your Motorola CLPe two way radio with the HKKN4027A cable kit.
-
Steeing tie rod outer LH MF65SKU: HKKN4028AMOTOROLA$ 19.92
Transfer your radio configuration to other Motorola CLPe two way radios with the HKKN4028A cloning cable.
-
Steering box assy 165SKU: FKN8113AMOTOROLA$ 93.65
Suitable for use with the Motorola CM series mobile radio models.
-
Steering box oil seal 165SKU: FKN8096BMOTOROLA$ 1.08
Flash upgrade adapter for Motorola CM140; CM160; CM340; CM360 mobile radios.
-
Steering draglink 188SKU: RKN4081CMOTOROLA$ 40.96
Avoids the need for the RLN4008 RIB box when programming CM and GM series mobile radios.
-
Steering shaft brass bush 165SKU: RKN4083BMOTOROLA$ 1.64
Connects the Motorola CM or GM series mobile radio to the RIB box
-
Steering shaft BRG 165SKU: PMKN4004MOTOROLA$ 10.75
Suitable for programming Motorola CP040 series portable radios.
-
-
Diff rear wheel stud 165/188SKU: PMKN4003BMOTOROLA$ 1.39
2.5mm connectors – suitable for radio to radio cloning between Motorola CP040 portable radios.
-
Front wheel stud 165SKU: 6686533Z01MOTOROLA$ 1.03
Service tool for use with the Motorola CP and DP1000 series portable radios
-
Steeing tie rod outer LH MF65SKU: PMKN4072AMOTOROLA$ 19.92
For connection via front microphone socket on Motorola DM series radios.
-
Steering box assy 165SKU: PMKN4016BMOTOROLA$ 93.65
For connection to Motorola DM series radios or test box.
-
Steering box oil seal 165SKU: PMKN4010BMOTOROLA$ 1.08
For programming Motorola DM series radios via rear facility connector.
-
Steering draglink 188SKU: PMKN4147AMOTOROLA$ 40.96
Connects to the microphone socket on the DM1000 control head for radio programming.
-
Steering shaft brass bush 165SKU: HKN6184CMOTOROLA$ 1.64
Allows programming of Motorola DM3000 series mobile radios via the microphone socket on the control head.
-
Steering shaft BRG 165SKU: PMKN4040AMOTOROLA$ 10.75
Telemetry cable suitable for Motorola DP3000 and DP4000 portable radios.
-
Diff rear wheel nut 165/188SKU: PMKN4156AMOTOROLA$ 1.04
Test cable for use with Motorola DP series digital DMR radio models.
-
Diff rear wheel stud 165/188SKU: 3271133M01MOTOROLA$ 1.39
Used on Motorola DP series digital portable radios to seal the vacuum hose to radio chassis connection.
-
Front wheel stud 165SKU: 5871134M01MOTOROLA$ 1.03
Connects the vacuum hose to the radio chassis. Compatible with the Motorola DP series portable radios.
Used to re pressure the radio and seal the unit after maintenance.
-
Steeing tie rod outer LH MF65SKU: NTN4265AMOTOROLA$ 19.92
Pressure pump for re pressurising the following Motorola radio series after servicing:-
DP2400; DP2600
DP3400; DP3600
DP4400; DP4600;DP4800
GP344/GP388
-
Steering box assy 165SKU: NLN9839AMOTOROLA$ 93.65
Includes gauge and hose. Order seal and connector separately.
Used with Motorola DP and GP Compact series radios.
-
Steering box oil seal 165SKU: PMKN4115BMOTOROLA$ 1.08
Programming cable for Motorola DP2400 and DP2600 digital radio models.
-
Steering draglink 188SKU: PMKN4071AMOTOROLA$ 40.96
Enables the MOTOTRBO portable radio to be connected to an external non-PC based application.
-
Steering shaft brass bush 165SKU: PMKN4012MOTOROLA$ 1.64
DMR portable radio programming cable, compatable with the DP3000 portable radio range
-
Steering shaft BRG 165SKU: PMKN4117BMOTOROLA$ 10.75
Used when programming the Motorola DP2400; DP2600 and DP3441 compact series radios.
-
Diff rear wheel nut 165/188SKU: GTF374CMOTOROLA$ 1.04
Connects the radio to the RIB box for programming the Motorola GM series mobile radios.
-
Diff rear wheel stud 165/188SKU: 6686119B01MOTOROLA$ 1.39
Designed to help with dismantling the Motorola GM series mobile radios.
-
Front wheel stud 165SKU: RKN4074MOTOROLA$ 1.03
Compatible for use with the Motorola Professional range of portable radios. Used with RLN4008 RIB box.
-
Steeing tie rod outer LH MF65SKU: 6680702Z01MOTOROLA$ 19.92
Special dismantling tool used with the Motorola GP series portable radios.
-
Steering box assy 165SKU: RKN4075MOTOROLA$ 93.65
Eliminates the need for the RLN4008 RIB box when programming Motorola GP series radios.
-
Steering box oil seal 165SKU: RLN4008MOTOROLA$ 1.08
Radio Interface Box [RIB] for use when programming Motorola GP and CP series portable radios.
-
Steering draglink 188SKU: HLN9742DMOTOROLA$ 40.96
Used to flash upgrade the firmware on Motorola GP and GM series radios.
-
Steering shaft brass bush 165SKU: EPN4042AMOTOROLA$ 1.64
Powers the radio interface box [RIB] instead of batteries. Used when programming Motorola GP/GM/CP and CM series radios.
-
Steering shaft BRG 165SKU: MDJMKN4125AMOTOROLA$ 10.75
Allows you to power the Motorola GP344 or GP388 GP compact series portable radios from an external power supply.
-
Diff rear wheel nut 165/188SKU: MDJMKN4123MOTOROLA$ 1.04
Programming and test cable for the Motorola GP344 and GP388 radio models.
-
-
Front wheel stud 165SKU: DDN9957AMOTOROLA$ 1.03
Programming cable suitable for MTR3000 base stations.
-
Steeing tie rod outer LH MF65SKU: PMDN4077ARMOTOROLA$ 19.92
The PMDN4077AR programming cable is compatible with the Motorola P100 series portable radios.
-
Steering box assy 165SKU: PMDN4076ARMOTOROLA$ 93.65
The PMDN4076AR cloning cable is compatible with the Motorola P100 series portable radios.
-
Steering box oil seal 165SKU: PMKN4265AMOTOROLA$ 1.08
Motorola R7 Programming Cable. Suitable for configuring the Motorola R7 portable radio. Use with GMVN6241 CPS software.
-
Steering draglink 188SKU: PMKN4231AMOTOROLA$ 40.96
Motorola R7 Test/Alignment Cable. A test and alignment cable suitable for use with the Motorola R7 DMR portable radio.
-
Steering shaft brass bush 165SKU: 3080369B72MOTOROLA$ 1.64
Connects RLN4008 RIB to PC for programming GP and CP Series radios
-
Steering shaft BRG 165SKU: PMKN4128AMOTOROLA$ 10.75
Portable programming cable with TTR for the Motorola SL and DP Series of digital portable radios.
-
Diff rear wheel nut 165/188SKU: 30009477001MOTOROLA$ 1.04
Programming and test cable for Motorola SLR5500 base station. Requires programming software [sold separately] – 30009477001
-
Diff rear wheel stud 165/188SKU: HKKN4027MOTOROLA$ 1.39
Allows programming of the XT420 and XT460 with the HTML based customer programming software.
-
Front wheel stud 165SKU: HKKN4028MOTOROLA$ 1.03
Allows data to be transferred between radios. Suitable for the XT420 and XT460 PMR446 licence free radios.
-
Steeing tie rod outer LH MF65SKU: IXEN4007ARMOTOROLA$ 19.92
The IXEN4007AR USB programming kit is compatible with the Motorola XTNi and XTNiD licence free radios.
-
Steering box assy 165SKU: 25-124330-01RMOTOROLA$ 93.65
Motorola programming cable with micro USB. Requires programming software GMVN5141 [sold separately]
-
-
Steering box oil seal 165SKU: CX9PPSCOPE$ 1.08
Complete programming kit suitable for the Scope Connexions advanced paging transmitter/encoder.
-
-
-
Scope Pagetek 4 Programming Kit
SKU: PT10PROGSCOPE£26.00Includes programming software and interface lead [USB] to allow you to reconfigure the Scope Pagetek 3 and 4 paging transmitters.
-
Steering shaft BRG 165SKU: MAR-600PRLDUSIMOCO$ 10.75
MAR-600PRLDU Mobile Programming Cable for the Simoco SDM610, SDM622 and SDM630 Digital Mobile Radios.
-
-
Diff rear wheel stud 165/188SKU: 7A0D100SZG1SIMOCO$ 1.39
For programming and reconfiguring the Simoco SDM730 Advanced DMR mobile radio.
-
-
Steeing tie rod outer LH MF65SKU: GA0M500SZG1SIMOCO$ 19.92
Simoco SDP660 Programming lead suitable for use with either the Simoco SDP650 and SDP660 DMR radios or the SRP9170.
-
Steering box assy 165SKU: 7A0M500SZG1SIMOCO$ 93.65
Simoco SDP750 and SDP760 programming cable. Allows you to reconfigure radio parameters via a PC.
-
Steering box oil seal 165SKU: MA-PROGSIMOCO$ 1.08
The MA-PROG programming kit is compatible with the Simoco SRM9000 series mobile radio/base station.
-
Steering draglink 188SKU: PAR-9180PRLDUSIMOCO$ 40.96
The PAR-9180PRLDU USB programming lead is compatible with the Simoco SRP9000 series portable radios including the SRP9170 and SRP9180 models.
-
Steering shaft brass bush 165SKU: TSF-PROGSIMOCO$ 1.64
The TSF-PROG programming kit is compatible with the Simoco TSFLite and TSF2000 series base stations.
-
Steering shaft BRG 165SKU: MAR-9000PRLDUSIMOCO$ 10.75
Programming lead suitable for the Simoco SRM, TSF and Xfin radio products.
-
Diff rear wheel nut 165/188SKU: TMAA21-01TAIT$ 1.04
The TMAA21-01 cable socket (DB15) to plug (RJ45) is compatible with the Tait TM8000, TM8000 XB and T-S8107 series mobile radios.
-
Diff rear wheel stud 165/188SKU: TMAA20-00TAIT$ 1.39
The TMAA20-00 programming kit is compatible with the Tait TM8000, TM8000 CB and T-S8107 series mobile radios.
-
Front wheel stud 165SKU: TMAA30-03TAIT$ 1.03
The TMAA30-03 adapter connects the RJ45 to the DB15. Compatible with the Tait TM8000, TM8000 XB and T-S8107 series mobile radios.
-
Steeing tie rod outer LH MF65SKU: TMAA20-02TAIT$ 19.92
The TMAA20-02 adapter connects the RJ45 to the DB9. Compatible with the Tait TM8000, TM8000 XB and T-S8107 series mobile radios.
-
Steering box assy 165SKU: TMAA21-00TAIT$ 93.65
The TMAA21-00 service kit is compatible with the Tait TM8000, TM8000 XB and T-S8107 series mobile radios. Supplied with product support CD, service manual, programming/calibration leads and radio test unit.
-
Steering box oil seal 165SKU: TMAA20-04TAIT$ 1.08
The TMAA20-04 socket/plug adapter is compatible with the Tait TP8100, TM8000, TM8000 XB and T-S8107 series portable/mobile radios.
-
Steering draglink 188SKU: T02-00031-0001TAIT$ 40.96
Tait TM81/82/93/TP81/93 Programming & Calibration Kit. Suitable for use with the Tait TP8 analogue, TP9 digital and TM8000 series mobile radios.
-
Steering shaft brass bush 165SKU: TPA-SV-006TAIT$ 1.64
The TPA-SV-006 radio programming lead is compatible with the Tait TP8100 series portable radios & TM8000 mobile radios.
-
-
-
-
Front wheel stud 165SKU: TTI-PROGTTI$ 1.03
Complete programming kit for the TTi TX1000U licence free portable radio.
-
Steeing tie rod outer LH MF65SKU: CB000262A01VERTEX$ 19.92
USB programming lead for the Vertex EVX-S24 digital radio.
Software included.
-
-
Steering box oil seal 165SKU: CT-27VERTEX$ 1.08
The CT-27 cloning cable is compatible with a range of Yaesu Vertex/Standard portable radios.
-
Steering draglink 188SKU: FIF-12VERTEX$ 40.96
The FIF-12 USB interface adapter and leads is for use with the CT-106 programming cable. Used with various Vertex VX Series portable radios.
-
Steering shaft brass bush 165SKU: FIF-10AVERTEX$ 1.64
The FIF-10A USB interface cable is for use with the CT-105/106/108 programming cable interface and is compatible with a range of Yaesu Vertex/Standard mobile and portable radios.
-
Steering shaft BRG 165SKU: SVC-1200VERTEX$ 10.75
The SV-1200 service kit is compatible with the Vertex/Standard VX-1210 transceiver.
-
Diff rear wheel nut 165/188SKU: CT-62/CE-77VERTEX$ 1.04
Complete programming kit for the Vertex VX-1700 HF radio models.
-
-
Front wheel stud 165SKU: CT-104AVERTEX$ 1.03
Also suitable for VX-4100/4200 mobile radios. Connects to FIF-10A
-
Steeing tie rod outer LH MF65SKU: CT-126VERTEX$ 19.92
Programming cable suitable for Vertex radios:-
– VX-2100
– VX-2200
– VX-4100
– VX-4200
-
Steering box assy 165SKU: CT-106VERTEX$ 93.65
The CT-106 programming cable interface is for use with the FIF-10A USB interface adapter and is compatible with a range of Yaesu Vertex/Standard portable radios.
-
Steering box oil seal 165SKU: CT-42VERTEX$ 1.08
The CT-42 programming cable is compatible with a range of Yaesu Vertex/Standard portable radios.
-
-
-
Steering shaft BRG 165SKU: VPL-1VERTEX$ 10.75
The VPL-1 programming kit is compatible with the Yaesu Vertex/Standard VX-4100E series mobile radios.
-
Diff rear wheel nut 165/188SKU: CT-153VERTEX$ 1.04
Allows cloning from mobiles to portables via accessory/programming socket. Suitable for Vertex VX-450, VX-454 and VX-459 portable radios.
-
Diff rear wheel stud 165/188SKU: CT-72VERTEX$ 1.39
The CT-72 radio clone cable is compatible with the Yaesu Vertex/Standard VX-5500 mobile radio.
-
Front wheel stud 165SKU: CT-70VERTEX$ 1.03
The CT-70 radio programming cable interface is for use with the CT-29 programming cable PC interface. Compatible with the Yaesu Vertex/Standard VX-5500 mobile radio.
-
Steeing tie rod outer LH MF65SKU: CT-105VERTEX$ 19.92
The CT-105 programming cable interface is for use with the FIF-10A USB interface adapter and is compatible with the Yaesu Vertex/Standard VX-5500 mobile radio.
-
Steering box assy 165SKU: VX-VPL-1DVERTEX$ 93.65
The VX-VPL-1D programming kit is compatible with the Yaesu Vertex/Standard VX-7000 and VX-9000 base stations.
-
Steering box oil seal 165SKU: CT-109VERTEX$ 1.08
The CT-109 programming cable kit is compatible with the Yaesu Vertex/Standard VX-920E series portable radio.
-
Steering draglink 188SKU: CT-108VERTEX$ 40.96
The CT-108 programming cable interface is for use with the FIF-10A USB interface adapter and is compatible with the Yaesu Vertex/Standard VX-920E series portable radio.
-
Steering shaft brass bush 165SKU: CT-116VERTEX$ 1.64
The CT-116 radio clone cable is compatible with the Yaesu Vertex/Standard VX-920E series portable radio.
-
Steering shaft BRG 165SKU: CT-4VERTEX$ 10.75
The CT-4 cloning cable is compatible with the Yaesu Vertex/Standard VX-4100E and VX-2100E series mobile radios.
-
Diff rear wheel nut 165/188SKU: CT-150VERTEX$ 1.04
Connects PC to rear of Vertex VXD series mobile radios and base stations for programming.
-
Diff rear wheel stud 165/188SKU: CT-151VERTEX$ 1.39
For test and alignment of VXD mobile radios/base stations.
Connects PC to rear of radio.