Tilting Mounts
In order to get the best out of your radio system we offer a complete range of programming equipment. These can be purchased with just the software or with the interface leads and will allow you to expand the capability of your radio by enabling additional features as well as giving you access to operating frequencies. Programming can be quite complicated so we are able to provide online or telephone assistance to ensure your radios perform as expected. Just call us on +44 [0]1332 363135 and select Option 2 for technical support. Alternatively you can e mail us at [email protected]
-
Protech TL-202 Heavy Duty Tilting TV Wall mount for 37 – 70″ TVsSKU: HFPROGBARRETT$ 19.06The HFPROG programming kit is compatible with the 2040 and 2050 transceivers.
-
Protech TL-210 Heavy Duty Tilting Curved TV Wall Mount for 37 – 70″ TVsSKU: PMKN4013MOTOROLA$ 19.06DMR portable radio programming, test and alignment cable. Compatable with the DP3000 portable radio range
-
Protech TL-213 Tilting Wall Mount for 32-65 inch TVSKU: CPROG-DTExENTEL$ 13.98For updating and changing configurations of the Entel DT series radios use the CPROG-DTEx lead with the appropriate software.
-
Protech TL-214 Tilting Slim Wall Mount For 42-80 Inch TVsSKU: CSP450ENTEL$ 19.06For powering the Entel DX4 series DMR radios without a standard CNB series battery.
-
PROTECH TL-215L Heavy Duty Tilting Wall Mount For 42-90 Inch TVsSKU: EPROG-DXENTEL$ 38.13USB programming lead suitable for use with the Entel DX4 series radios.
-
Protech TL-220 X-Large Heavy Duty Tilting TV Wall Mount for 60 – 100″ TVsSKU: HT-CLNENTEL$ 63.55The HT-CLN clone lead is compatible with the Entel HT446 and HT700 series portable radios.
-
ProTech TL-221 Heavy Duty Tilting Wall Mount for 32 – 50″ TVsSKU: EPROG-HTENTEL$ 13.98Entel HT700 Series 2.0 programming kit. Includes software, programming lead with serial connector.
-
ProTech TL-222 Heavy Duty Tilting Wall Mount for 32 – 65″ TVsSKU: HX-CLNENTEL$ 15.88The HX-CLN clone lead is compatible with the Entel HX400 and HX446 series portable radios.
-
ProTech TL-223 Pivoting Wall Mount for 13 – 27″ TVsSKU: EPROG-RPENTEL$ 9.53Programming lead and software for Entel RP500 Series base station/repeater.
-
ProTech TL-224 (NT-110 )Super Slim Wall Mount for 13 – 27″ TVs/MonitorsSKU: T9101606YAESU$ 6.35Programming cable for Yaesu FTA series air band portable radios.
-
ProTech TL-225 Heavy Duty Tilting Wall Mount for 42 -82″ TVsSKU: PC26HYT$ 22.24The PC26 programming cable is compatible with a range of HYT radios.
-
ProTech TL-226 Heavy Duty Tilting Wall Mount for 42 – 90″ TVsSKU: PC25HYT$ 31.77The PC25 programming cable is compatible with the HYT TC780 and TC3000s/PKTC3600s series portable radios.
-
ProTech TL-227 Slim Tilting Wall Mount for 32 – 55″ TVsSKU: PC27HYT$ 12.71The PC27 programming cable with USB connector is compatible with the HYT TC265s/TC365s radio.
-
ProTech TL-228 Slim Tilting Wall Mount for 37″ – 70″ TVsSKU: CP01HYT$ 15.88The CP01 cloning cable is compatible with the HYT TC265s/TC365s radio.
-
ProTech TL-230 Low Profile Tilting Wall Mount for 42 – 90″ TVsSKU: PC23HYT$ 19.06The PC23 programming cable is compatible with the HYT TC265s/TC365s radio.
-
ProTech TL-240 Short Arm Heavy Duty Tilting Wall Mount for 17 – 37″ TVsSKU: PC18HYT$ 11.43The PC18 programming cable is compatible with the HYT TC3000s/PKTC3600s radios.
-
ProTech TL-245 Short Arm Heavy Duty Tilting Wall Mount for 17 – 42″ TVsSKU: PC19HYT$ 12.71The PC19 programming cable is compatible with s range of HYT radios.
-
ProTech TL-249 Slim Tilting Wall Mount for 32 – 55″ TVsSKU: CP05HYT$ 12.71The CP05 cloning cable is compatible with the HYT TC518 and TC610/TC620/TC700/TC700Ex series radios.
-
ProTech TL-250 Slim Tilting Wall Mount for 37- 70″ TVsSKU: PKTC610HYT$ 15.88The PKTC610 is compatible with the HYT TC610 radio.
-
Protech TR-001 Tripod TV Mount for 32″ – 55″ TVsSKU: PKTC620HYT$ 50.84The PKTC620 programming lead and software is compatible with the HYT TC620 radio.
-
Protech TR-002 Tripod TV Mount for 32″ – 65″ TVsSKU: PKTC700HYT$ 50.84The PKTC700 programming kit is compatible with the HYT TC700 radio.
-
Protech Triple Screen 40″ – 55″ Menu Board Wall MountSKU: CP03HYT$ 95.76The CP03 cable is compatible with the HYT TC-780 and TC-3000s/TC-3600s series portable radios.
-
Protech Triple Screen 40″ – 55″ Video wall /Menu Board Wall Mount With Optional Ceiling Mount (Upto 36 inches drop)SKU: PKTC700ExHYT$ 99.73The PKTC700Ex programming kit is compatible with the HYT TC700Ex radio.
-
Protech Triple Screen 40″ – 55″ Video wall /Menu Board Wall Mount With Optional Ceiling Mount (Upto 59 inches drop)SKU: PKTM600HYT$ 92.90The PKTM600 programming kit is compatible with the HYT TM600 and TM610 mobile radios.
-
Protech TL-202 Heavy Duty Tilting TV Wall mount for 37 – 70″ TVsSKU: CP06HYT$ 19.06
The CP06 cloning cable is compatible with the HYT TM600, TM610 and TM800 mobile radios.
-
Protech TL-210 Heavy Duty Tilting Curved TV Wall Mount for 37 – 70″ TVsSKU: PC21HYT$ 19.06
The PC21 programming cable is compatible with the TR800 base station repeater and TM600/TM610/TM800 mobile radios.
-
Protech TL-213 Tilting Wall Mount for 32-65 inch TVSKU: PC24HYT$ 13.98
The HYT PC24 data transmission cable is compatible with the HYT TM800 mobile radio.
-
Protech TL-214 Tilting Slim Wall Mount For 42-80 Inch TVsSKU: PKTM800HYT$ 19.06
The PKTM800 programming kit is compatible with the HYT TM800 mobile radio.
-
PROTECH TL-215L Heavy Duty Tilting Wall Mount For 42-90 Inch TVsSKU: PC08HYT$ 38.13
The PC08 universal programming cable is suitable for a range of HYT radios.
-
Protech TL-220 X-Large Heavy Duty Tilting TV Wall Mount for 60 – 100″ TVsSKU: PC155HYTERA$ 63.55
Hytera BP515LF Programming Cable. The PC155 programming cable can be used to reconfigure the Hytera BP515LF and AP515LF portable radios.
-
-
ProTech TL-222 Heavy Duty Tilting Wall Mount for 32 – 65″ TVsSKU: PC79HYTERA$ 15.88
Hytera MD6 Series mobile radio programming lead.
-
ProTech TL-223 Pivoting Wall Mount for 13 – 27″ TVsSKU: PC109HYTERA$ 9.53
Radio programming cable designed for use with the MD615 and MD625 series DMR mobile radios.
-
ProTech TL-224 (NT-110 )Super Slim Wall Mount for 13 – 27″ TVs/MonitorsSKU: PC43HYTERA$ 6.35
PC43 DB26-Connector dispatching cable
For Hytera MD700 Series Digital Mobile Radios.
-
ProTech TL-225 Heavy Duty Tilting Wall Mount for 42 -82″ TVsSKU: PC47HYTERA$ 22.24
PC47 Download and Programming Cable
For Hytera MD700 Series Digital Mobile Radios.
-
ProTech TL-226 Heavy Duty Tilting Wall Mount for 42 – 90″ TVsSKU: BC00004HYTERA$ 31.77
Complete programming kit for the Hytera MD785 DMR mobile radio.
-
ProTech TL-227 Slim Tilting Wall Mount for 32 – 55″ TVsSKU: PC40HYTERA$ 12.71
PC40 Data Transmission Cable (RoHS)
For Hytera MD700 Series Mobile Digital Radio.
-
ProTech TL-228 Slim Tilting Wall Mount for 37″ – 70″ TVsSKU: PC37HYTERA$ 15.88
PC37 Programming Cable (USB Port) (RoHS)
For Hytera MD700 Series Mobile Digital Radios.
-
ProTech TL-230 Low Profile Tilting Wall Mount for 42 – 90″ TVsSKU: SK008HYTERA$ 19.06
Includes programming software and interface lead for Hytera MD785 mobile radios.
-
ProTech TL-240 Short Arm Heavy Duty Tilting Wall Mount for 17 – 37″ TVsSKU: PC87HYTERA$ 11.43
Back-to-back Data Cable with Ignition Function (DB26 to DB26), 0.6m Length
-
ProTech TL-245 Short Arm Heavy Duty Tilting Wall Mount for 17 – 42″ TVsSKU: PC91HYTERA$ 12.71
Data Cable (DB26 connector with Ignition and Speaker cable), 3m Length
-
ProTech TL-249 Slim Tilting Wall Mount for 32 – 55″ TVsSKU: PC70HYTERA$ 12.71
Data cable for Hytera MD785i DMR mobile radio with a DB26 to DB9 connector. Cable length 1.2 metres.
-
ProTech TL-250 Slim Tilting Wall Mount for 37- 70″ TVsSKU: POA108HYTERA$ 15.88
Hytera MD785i DMR mobile radio data cable with DB26 to DB9 male connector. Cable length 1.2 metres.
-
Protech TR-001 Tripod TV Mount for 32″ – 55″ TVsSKU: RC07HYTERA$ 50.84
A recording cable terminated at one end by a DB26 connector and RJ11 at the other end. Cable length is 1.2 metres.
-
Protech TR-002 Tripod TV Mount for 32″ – 65″ TVsSKU: PC85HYTERA$ 50.84
Programming Cable (USB to 10-pin Aviation Connector) (with signal amplification) 1.5m Length
-
Protech Triple Screen 40″ – 55″ Menu Board Wall MountSKU: PC80HYTERA$ 95.76
USB to Micro USB programming cable for the Hytera MD785i DMR radio. Cable length is 1.5 metres.
-
Protech Triple Screen 40″ – 55″ Video wall /Menu Board Wall Mount With Optional Ceiling Mount (Upto 36 inches drop)SKU: PC39HYTERA$ 99.73
Data transmission cable (PEI). Also used for firmware upgrade of the radio mother board.
-
Protech Triple Screen 40″ – 55″ Video wall /Menu Board Wall Mount With Optional Ceiling Mount (Upto 59 inches drop)SKU: PC68HYTERA$ 92.90
An extra long [5 metres] USB data cable for the Hytera MT680 Plus TETRA radio.
-
Protech TL-202 Heavy Duty Tilting TV Wall mount for 37 – 70″ TVsSKU: PC35HYTERA$ 19.06
USB style programming cable also used for firmware upgrades to the Hytera MT680 Plus radio. Operates via the front panel.
-
Protech TL-210 Heavy Duty Tilting Curved TV Wall Mount for 37 – 70″ TVsSKU: SK003HYTERA$ 19.06
Includes the PC69 cable and software.
Suitable for the Hytera PD3 series portable radios.
-
Protech TL-213 Tilting Wall Mount for 32-65 inch TVSKU: PC69HYTERA$ 13.98
The PC69 programming lead allows you to change the operating frequencies and other parameters of the PD355 and PD365 digital migration radio.
-
Protech TL-214 Tilting Slim Wall Mount For 42-80 Inch TVsSKU: SK004HYTERA$ 19.06
Includes the PC76 programming cable and software.
Suitable for the Hytera PD4 and PD5 DMR portable radios.
-
PROTECH TL-215L Heavy Duty Tilting Wall Mount For 42-90 Inch TVsSKU: PC76HYTERA$ 38.13
Connects Hytera PD400 series radios to PC via USB port for programming.
-
Protech TL-220 X-Large Heavy Duty Tilting TV Wall Mount for 60 – 100″ TVsSKU: SK005HYTERA$ 63.55
Hytera PD5 series programming kit comprising PC63 cable and software.
-
ProTech TL-221 Heavy Duty Tilting Wall Mount for 32 – 50″ TVsSKU: PC63HYTERA$ 13.98
Programming cable for the Hytera PD505 and PD565 digital portable radios.
-
ProTech TL-222 Heavy Duty Tilting Wall Mount for 32 – 65″ TVsSKU: SK006HYTERA$ 15.88
Hytera PD6 Series Programming Kit. Includes software and PC45 cable
-
ProTech TL-223 Pivoting Wall Mount for 13 – 27″ TVsSKU: PC38HYTERA$ 9.53
Connects the radio to a PC to allow programming of the Hytera PD705 and PD785 digital portable radios.
-
ProTech TL-224 (NT-110 )Super Slim Wall Mount for 13 – 27″ TVs/MonitorsSKU: SK007HYTERA$ 6.35
For use with The Hytera PD715Ex and PD795Ex ATEX approved portable radios.
Includes software and interface lead.
-
ProTech TL-225 Heavy Duty Tilting Wall Mount for 42 -82″ TVsSKU: PC143HYTERA$ 22.24
Hytera PNC550 Data Cable. USB to Type C. 1 metre length
-
-
-
ProTech TL-228 Slim Tilting Wall Mount for 37″ – 70″ TVsSKU: PC64HYTERA$ 15.88
PC programming cable for updating configuration of the Hytera PT580H TETRA radio terminal.
-
ProTech TL-230 Low Profile Tilting Wall Mount for 42 – 90″ TVsSKU: PC36HYTERA$ 19.06
A PC programming cable with virtual USB port for the Hytera PT580H Plus TETRA radio terminal.
-
ProTech TL-240 Short Arm Heavy Duty Tilting Wall Mount for 17 – 37″ TVsSKU: PC90HYTERA$ 11.43
A serial to USB adapter cable to allow programming of the Hytera PT580H Plus TETRA radio terminal.
-
ProTech TL-245 Short Arm Heavy Duty Tilting Wall Mount for 17 – 42″ TVsSKU: PC67HYTERA$ 12.71
USB programming cable for the Hytera PT790Ex I.S TETRA radio terminal.
-
ProTech TL-249 Slim Tilting Wall Mount for 32 – 55″ TVsSKU: SK009HYTERA$ 12.71
Hytera RD625 programming Kit. Programming kit includes PC75 cable and software. For programming and configuring the RD625 DMR repeater.
-
ProTech TL-250 Slim Tilting Wall Mount for 37- 70″ TVsSKU: PC75HYTERA$ 15.88
Hytera RD625 programming lead. Order programming software [SK008] separately.
-
Protech TR-001 Tripod TV Mount for 32″ – 55″ TVsSKU: BC00005HYTERA$ 50.84
Programming kit (programming cable PC37 + Disc)for RD96 Series Digital Repeaters.
-
Protech TR-002 Tripod TV Mount for 32″ – 65″ TVsSKU: PC49HYTERA$ 50.84
Back to back data cable for RD96 Series Digital Repeaters.
-
Protech Triple Screen 40″ – 55″ Menu Board Wall MountSKU: PC30HYTERA$ 95.76
Programming Cable with USB Connector.
-
Protech Triple Screen 40″ – 55″ Video wall /Menu Board Wall Mount With Optional Ceiling Mount (Upto 36 inches drop)SKU: PC93HYTERA$ 99.73
The PC93 programming cable allows users to reprogram the Hytera VM685 remote video speaker microphone.
-
Protech Triple Screen 40″ – 55″ Video wall /Menu Board Wall Mount With Optional Ceiling Mount (Upto 59 inches drop)SKU: BC00008HYTERA$ 92.90
Programming software and lead for the Hytera X1 and X1p covert digital radios.
-
Protech TL-202 Heavy Duty Tilting TV Wall mount for 37 – 70″ TVsSKU: PC45HYTERA$ 19.06
Programs the Hytera X1e and X1p digital portable radios.
-
Protech TL-210 Heavy Duty Tilting Curved TV Wall Mount for 37 – 70″ TVsSKU: OPC-592ICOM$ 19.06
The OPC-591 cloning cable adapter requires the OPC478 cloning cable. It is compatible with the ICOM IC-A110 air band and IC-F7000 HF radios.
-
Protech TL-213 Tilting Wall Mount for 32-65 inch TVSKU: OPC-1529ICOM$ 13.98
The OPC-1529 connection cable (RS-232C type) is compatible with the ICOM IC-E91 portable radio.
-
Protech TL-214 Tilting Slim Wall Mount For 42-80 Inch TVsSKU: OPC-478UCICOM$ 19.06
OPC-478UC USB Cloning Lead USB Port to Radio. Used on most ICOM mobile and portable radios.
-
PROTECH TL-215L Heavy Duty Tilting Wall Mount For 42-90 Inch TVsSKU: OPC-1122ICOM$ 38.13
OPC-1122 programming cable for all ICOM mobile radios with an RJ45 8 pin microphone socket.
Suitable for a range of ICOM mobile radios including the IC-F110 and IC-F210 models.
-
Protech TL-220 X-Large Heavy Duty Tilting TV Wall Mount for 60 – 100″ TVsSKU: OPC-822ICOM$ 63.55
ICOM IC-F1610 and IC-F1710 mobile radio interface cable for MAP 27.
-
ProTech TL-221 Heavy Duty Tilting Wall Mount for 32 – 50″ TVsSKU: OPC-474ICOM$ 13.98
The OPC-474 cloning cable is compatible with a range of ICOM radios.
-
ProTech TL-222 Heavy Duty Tilting Wall Mount for 32 – 65″ TVsSKU: OPC-1862ICOM$ 15.88
USB style programming cable for ICOM IC-F3202DEx and IC-F4202DEx portable radios. Requires CSF3200DEX.001 software supplied separately.
-
ProTech TL-223 Pivoting Wall Mount for 13 – 27″ TVsSKU: OPC-1870ICOM$ 9.53
Permits radio data transfer between 2 portable radios including the ICOM IC-F3262D/4262D series portable radios.
-
ProTech TL-224 (NT-110 )Super Slim Wall Mount for 13 – 27″ TVs/MonitorsSKU: OPC-1871ICOM$ 6.35
For transferring date from portable radio to mobile radios. Compatible with ICOM IC-F3262D/4262D series portable radios.
-
ProTech TL-225 Heavy Duty Tilting Wall Mount for 42 -82″ TVsSKU: OPC-2362ICOM$ 22.24
The OPC-2362 lets you easily transfer radio data from a ICOM IC-F3400D series IDAS portable radio to a ICOM IC-F5400D series IDAS mobile radio.
-
ProTech TL-226 Heavy Duty Tilting Wall Mount for 42 – 90″ TVsSKU: OPC-1122UICOM$ 31.77
The OPC-1122U USB cloning cable is compatible with the ICOM IC-F5022 mobile radio and IC-FR5100 series base station repeater.
-
ProTech TL-227 Slim Tilting Wall Mount for 32 – 55″ TVsSKU: OPC-966.002ICOM$ 12.71
The OPC-966.002 cloning lead is compatible with a range of ICOM radios.
-
ProTech TL-228 Slim Tilting Wall Mount for 37″ – 70″ TVsSKU: OPC-2218LUICOM$ 15.88
Suitable for the ICOM IC-F5122DD/6122DD data modem.
-
-
ProTech TL-240 Short Arm Heavy Duty Tilting Wall Mount for 17 – 37″ TVsSKU: OPC2338ICOM$ 11.43
Change radio parameters and configuration with the OPC2338 programming cable. Requires CSF52D programming software [sold separately].
-
ProTech TL-245 Short Arm Heavy Duty Tilting Wall Mount for 17 – 42″ TVsSKU: OPC-966.001ICOM$ 12.71
The OPC-966.001 serial cloning cable is compatible with the ICOM IC-F61M and IC-F51V series radio.
-
ProTech TL-249 Slim Tilting Wall Mount for 32 – 55″ TVsSKU: OPC-2091ICOM$ 12.71
OPC-2091 Cloning Cable Adapter for IC-M23
-
ProTech TL-250 Slim Tilting Wall Mount for 37- 70″ TVsSKU: CS-M324ICOM$ 15.88
CS-M324 Programming Software and Adapter for IC-M323
-
Protech TR-001 Tripod TV Mount for 32″ – 55″ TVsSKU: OPC-1655ICOM$ 50.84
The OPC-1655 cable adapter is compatible with the ICOM IC-M33 marine radio. It is for use with the OPC-478/UC cloning cable.
-
Protech TR-002 Tripod TV Mount for 32″ – 65″ TVsSKU: OPC-980ICOM$ 50.84
The OPC-980 cloning cable adapter is compatible with the ICOM IC-GM651, IC-M505 and IC-M603 marine mobile radios.
-
Protech Triple Screen 40″ – 55″ Menu Board Wall MountSKU: OPC-2382ICOM$ 95.76
ICOM IC-M605E Conversion Cable. The OPC-2382 is a programming conversion cable that is used with the OPC-478UC cable [USB].
-
Protech Triple Screen 40″ – 55″ Video wall /Menu Board Wall Mount With Optional Ceiling Mount (Upto 36 inches drop)SKU: OPC-922ICOM$ 99.73
The OPC-922 cloning cable adapter is compatible with the ICOM IC-M71, IC-GM1600E and IC-M90E marine radios.
-
Protech Triple Screen 40″ – 55″ Video wall /Menu Board Wall Mount With Optional Ceiling Mount (Upto 59 inches drop)SKU: CS-R20ICOM$ 92.90
The CS-R20 cloning software is supplied with a USB cloning cable. It is compatible with the ICOM IC-R20 air band radio.
-
Protech TL-202 Heavy Duty Tilting TV Wall mount for 37 – 70″ TVsSKU: OPC-1402ICOM$ 19.06
Maintenance cable suitable for use with the ICOM IP1000C Advanced Radio system server.
-
Protech TL-210 Heavy Duty Tilting Curved TV Wall Mount for 37 – 70″ TVsSKU: KPG-36XMKENWOOD$ 19.06
Programming cable for the Kenwood NX-5200/5300 NXDN/P25 digital portable radios. Requires KPG-D1E programming software.
-
Protech TL-213 Tilting Wall Mount for 32-65 inch TVSKU: KPG-46XMKENWOOD$ 13.98
Suitable for use with Kenwood NX-5700/NX-5800 multi mode mobile radios. Requires programming software – KPG-D1E [sold separately].
-
Protech TL-214 Tilting Slim Wall Mount For 42-80 Inch TVsSKU: KPG-46UKENWOOD$ 19.06
Kenwood USB programming lead for the following Kenwood radios:-
– NX-700/NX-800
– NX-720/NX-820
– NXR-710/NXR-810
– TKR-D710/TKR-D810
-
PROTECH TL-215L Heavy Duty Tilting Wall Mount For 42-90 Inch TVsSKU: KPG-46AKENWOOD$ 38.13
The KPG-46A programming kit is compatible with a range of Kenwood mobile radios and base stations.
-
Protech TL-220 X-Large Heavy Duty Tilting TV Wall Mount for 60 – 100″ TVsSKU: KCT-53UKENWOOD$ 63.55
The KCT-53U serial to USB adapter is compatible with a range of Kenwood radios and base stations and is supplied with drivers.
-
ProTech TL-221 Heavy Duty Tilting Wall Mount for 32 – 50″ TVsSKU: KPG-22UKENWOOD$ 13.98
Suitable for programming a range of Kenwood portable radios with the Kenwood 2 pin accessory socket.
-
ProTech TL-222 Heavy Duty Tilting Wall Mount for 32 – 65″ TVsSKU: KPG-22AKENWOOD$ 15.88
The KPG-22A serial programming cable is compatible with the Kenwood TK-3301, TK-3201, TK-2202 series, TK-2170 series and TK-2302 series portable radios.
-
ProTech TL-223 Pivoting Wall Mount for 13 – 27″ TVsSKU: KPG-186UKENWOOD$ 9.53
Programming lead for use with the Kenwood TK-3601D licence free digital radio.
-
ProTech TL-224 (NT-110 )Super Slim Wall Mount for 13 – 27″ TVs/MonitorsSKU: KPG-36AKENWOOD$ 6.35
Serial programming lead for use with Kenwood TK-D series portable radios. Should be used with KPG-166DM software [sold separately].
-
ProTech TL-225 Heavy Duty Tilting Wall Mount for 42 -82″ TVsSKU: KPG-36UKENWOOD$ 22.24
USB programming cable for Kenwood TK-D series portable radios. Requires KPG-166DM programming software.
-
ProTech TL-226 Heavy Duty Tilting Wall Mount for 42 – 90″ TVsSKU: PR-SL1000-01MAXON$ 31.77
Programming cable and software suitable for the Maxon SL1000 portable radio.
-
ProTech TL-227 Slim Tilting Wall Mount for 32 – 55″ TVsSKU: PK-SL1000-02MAXON$ 12.71
Permits radio data to be transferred from radio to radio. Suitable for Maxon SL1000/S5.
-
ProTech TL-228 Slim Tilting Wall Mount for 37″ – 70″ TVsSKU: PRG-G15MIDLAND$ 15.88
Programming kit including software for Midland G18. Required to enable the voice compander and FM radio functions.
-
ProTech TL-230 Low Profile Tilting Wall Mount for 42 – 90″ TVsSKU: HKKN4027AMOTOROLA$ 19.06
Change the configuration of your Motorola CLPe two way radio with the HKKN4027A cable kit.
-
ProTech TL-240 Short Arm Heavy Duty Tilting Wall Mount for 17 – 37″ TVsSKU: HKKN4028AMOTOROLA$ 11.43
Transfer your radio configuration to other Motorola CLPe two way radios with the HKKN4028A cloning cable.
-
ProTech TL-245 Short Arm Heavy Duty Tilting Wall Mount for 17 – 42″ TVsSKU: FKN8113AMOTOROLA$ 12.71
Suitable for use with the Motorola CM series mobile radio models.
-
ProTech TL-249 Slim Tilting Wall Mount for 32 – 55″ TVsSKU: FKN8096BMOTOROLA$ 12.71
Flash upgrade adapter for Motorola CM140; CM160; CM340; CM360 mobile radios.
-
ProTech TL-250 Slim Tilting Wall Mount for 37- 70″ TVsSKU: RKN4081CMOTOROLA$ 15.88
Avoids the need for the RLN4008 RIB box when programming CM and GM series mobile radios.
-
Protech TR-001 Tripod TV Mount for 32″ – 55″ TVsSKU: RKN4083BMOTOROLA$ 50.84
Connects the Motorola CM or GM series mobile radio to the RIB box
-
Protech TR-002 Tripod TV Mount for 32″ – 65″ TVsSKU: PMKN4004MOTOROLA$ 50.84
Suitable for programming Motorola CP040 series portable radios.
-
Protech Triple Screen 40″ – 55″ Menu Board Wall MountSKU: 0180305K08EPPMOTOROLA$ 95.76
Suitable for CP & DP Series radios.
-
Protech Triple Screen 40″ – 55″ Video wall /Menu Board Wall Mount With Optional Ceiling Mount (Upto 36 inches drop)SKU: PMKN4003BMOTOROLA$ 99.73
2.5mm connectors – suitable for radio to radio cloning between Motorola CP040 portable radios.
-
Protech Triple Screen 40″ – 55″ Video wall /Menu Board Wall Mount With Optional Ceiling Mount (Upto 59 inches drop)SKU: 6686533Z01MOTOROLA$ 92.90
Service tool for use with the Motorola CP and DP1000 series portable radios
-
Protech TL-202 Heavy Duty Tilting TV Wall mount for 37 – 70″ TVsSKU: PMKN4072AMOTOROLA$ 19.06
For connection via front microphone socket on Motorola DM series radios.
-
Protech TL-210 Heavy Duty Tilting Curved TV Wall Mount for 37 – 70″ TVsSKU: PMKN4016BMOTOROLA$ 19.06
For connection to Motorola DM series radios or test box.
-
Protech TL-213 Tilting Wall Mount for 32-65 inch TVSKU: PMKN4010BMOTOROLA$ 13.98
For programming Motorola DM series radios via rear facility connector.
-
Protech TL-214 Tilting Slim Wall Mount For 42-80 Inch TVsSKU: PMKN4147AMOTOROLA$ 19.06
Connects to the microphone socket on the DM1000 control head for radio programming.
-
PROTECH TL-215L Heavy Duty Tilting Wall Mount For 42-90 Inch TVsSKU: HKN6184CMOTOROLA$ 38.13
Allows programming of Motorola DM3000 series mobile radios via the microphone socket on the control head.
-
Protech TL-220 X-Large Heavy Duty Tilting TV Wall Mount for 60 – 100″ TVsSKU: PMKN4040AMOTOROLA$ 63.55
Telemetry cable suitable for Motorola DP3000 and DP4000 portable radios.
-
ProTech TL-221 Heavy Duty Tilting Wall Mount for 32 – 50″ TVsSKU: PMKN4156AMOTOROLA$ 13.98
Test cable for use with Motorola DP series digital DMR radio models.
-
ProTech TL-222 Heavy Duty Tilting Wall Mount for 32 – 65″ TVsSKU: 3271133M01MOTOROLA$ 15.88
Used on Motorola DP series digital portable radios to seal the vacuum hose to radio chassis connection.
-
ProTech TL-223 Pivoting Wall Mount for 13 – 27″ TVsSKU: 5871134M01MOTOROLA$ 9.53
Connects the vacuum hose to the radio chassis. Compatible with the Motorola DP series portable radios.
Used to re pressure the radio and seal the unit after maintenance.
-
ProTech TL-224 (NT-110 )Super Slim Wall Mount for 13 – 27″ TVs/MonitorsSKU: NTN4265AMOTOROLA$ 6.35
Pressure pump for re pressurising the following Motorola radio series after servicing:-
DP2400; DP2600
DP3400; DP3600
DP4400; DP4600;DP4800
GP344/GP388
-
ProTech TL-225 Heavy Duty Tilting Wall Mount for 42 -82″ TVsSKU: NLN9839AMOTOROLA$ 22.24
Includes gauge and hose. Order seal and connector separately.
Used with Motorola DP and GP Compact series radios.
-
ProTech TL-226 Heavy Duty Tilting Wall Mount for 42 – 90″ TVsSKU: PMKN4115BMOTOROLA$ 31.77
Programming cable for Motorola DP2400 and DP2600 digital radio models.
-
ProTech TL-227 Slim Tilting Wall Mount for 32 – 55″ TVsSKU: PMKN4071AMOTOROLA$ 12.71
Enables the MOTOTRBO portable radio to be connected to an external non-PC based application.
-
ProTech TL-228 Slim Tilting Wall Mount for 37″ – 70″ TVsSKU: PMKN4012MOTOROLA$ 15.88
DMR portable radio programming cable, compatable with the DP3000 portable radio range
-
ProTech TL-230 Low Profile Tilting Wall Mount for 42 – 90″ TVsSKU: PMKN4117BMOTOROLA$ 19.06
Used when programming the Motorola DP2400; DP2600 and DP3441 compact series radios.
-
ProTech TL-240 Short Arm Heavy Duty Tilting Wall Mount for 17 – 37″ TVsSKU: GTF374CMOTOROLA$ 11.43
Connects the radio to the RIB box for programming the Motorola GM series mobile radios.
-
ProTech TL-245 Short Arm Heavy Duty Tilting Wall Mount for 17 – 42″ TVsSKU: 6686119B01MOTOROLA$ 12.71
Designed to help with dismantling the Motorola GM series mobile radios.
-
ProTech TL-249 Slim Tilting Wall Mount for 32 – 55″ TVsSKU: RKN4074MOTOROLA$ 12.71
Compatible for use with the Motorola Professional range of portable radios. Used with RLN4008 RIB box.
-
ProTech TL-250 Slim Tilting Wall Mount for 37- 70″ TVsSKU: 6680702Z01MOTOROLA$ 15.88
Special dismantling tool used with the Motorola GP series portable radios.
-
Protech TR-001 Tripod TV Mount for 32″ – 55″ TVsSKU: RKN4075MOTOROLA$ 50.84
Eliminates the need for the RLN4008 RIB box when programming Motorola GP series radios.
-
Protech TR-002 Tripod TV Mount for 32″ – 65″ TVsSKU: RLN4008MOTOROLA$ 50.84
Radio Interface Box [RIB] for use when programming Motorola GP and CP series portable radios.
-
Protech Triple Screen 40″ – 55″ Menu Board Wall MountSKU: HLN9742DMOTOROLA$ 95.76
Used to flash upgrade the firmware on Motorola GP and GM series radios.
-
Protech Triple Screen 40″ – 55″ Video wall /Menu Board Wall Mount With Optional Ceiling Mount (Upto 36 inches drop)SKU: EPN4042AMOTOROLA$ 99.73
Powers the radio interface box [RIB] instead of batteries. Used when programming Motorola GP/GM/CP and CM series radios.
-
Protech Triple Screen 40″ – 55″ Video wall /Menu Board Wall Mount With Optional Ceiling Mount (Upto 59 inches drop)SKU: MDJMKN4125AMOTOROLA$ 92.90
Allows you to power the Motorola GP344 or GP388 GP compact series portable radios from an external power supply.
-
Protech TL-202 Heavy Duty Tilting TV Wall mount for 37 – 70″ TVsSKU: MDJMKN4123MOTOROLA$ 19.06
Programming and test cable for the Motorola GP344 and GP388 radio models.
-
Protech TL-210 Heavy Duty Tilting Curved TV Wall Mount for 37 – 70″ TVsSKU: PMKN4230AMOTOROLA$ 19.06
-
Protech TL-213 Tilting Wall Mount for 32-65 inch TVSKU: DDN9957AMOTOROLA$ 13.98
Programming cable suitable for MTR3000 base stations.
-
Protech TL-214 Tilting Slim Wall Mount For 42-80 Inch TVsSKU: PMDN4077ARMOTOROLA$ 19.06
The PMDN4077AR programming cable is compatible with the Motorola P100 series portable radios.
-
PROTECH TL-215L Heavy Duty Tilting Wall Mount For 42-90 Inch TVsSKU: PMDN4076ARMOTOROLA$ 38.13
The PMDN4076AR cloning cable is compatible with the Motorola P100 series portable radios.
-
Protech TL-220 X-Large Heavy Duty Tilting TV Wall Mount for 60 – 100″ TVsSKU: PMKN4265AMOTOROLA$ 63.55
Motorola R7 Programming Cable. Suitable for configuring the Motorola R7 portable radio. Use with GMVN6241 CPS software.
-
ProTech TL-221 Heavy Duty Tilting Wall Mount for 32 – 50″ TVsSKU: PMKN4231AMOTOROLA$ 13.98
Motorola R7 Test/Alignment Cable. A test and alignment cable suitable for use with the Motorola R7 DMR portable radio.
-
ProTech TL-222 Heavy Duty Tilting Wall Mount for 32 – 65″ TVsSKU: 3080369B72MOTOROLA$ 15.88
Connects RLN4008 RIB to PC for programming GP and CP Series radios
-
ProTech TL-223 Pivoting Wall Mount for 13 – 27″ TVsSKU: PMKN4128AMOTOROLA$ 9.53
Portable programming cable with TTR for the Motorola SL and DP Series of digital portable radios.
-
ProTech TL-224 (NT-110 )Super Slim Wall Mount for 13 – 27″ TVs/MonitorsSKU: 30009477001MOTOROLA$ 6.35
Programming and test cable for Motorola SLR5500 base station. Requires programming software [sold separately] – 30009477001
-
ProTech TL-225 Heavy Duty Tilting Wall Mount for 42 -82″ TVsSKU: HKKN4027MOTOROLA$ 22.24
Allows programming of the XT420 and XT460 with the HTML based customer programming software.
-
ProTech TL-226 Heavy Duty Tilting Wall Mount for 42 – 90″ TVsSKU: HKKN4028MOTOROLA$ 31.77
Allows data to be transferred between radios. Suitable for the XT420 and XT460 PMR446 licence free radios.
-
ProTech TL-227 Slim Tilting Wall Mount for 32 – 55″ TVsSKU: IXEN4007ARMOTOROLA$ 12.71
The IXEN4007AR USB programming kit is compatible with the Motorola XTNi and XTNiD licence free radios.
-
ProTech TL-228 Slim Tilting Wall Mount for 37″ – 70″ TVsSKU: 25-124330-01RMOTOROLA$ 15.88
Motorola programming cable with micro USB. Requires programming software GMVN5141 [sold separately]
-
-
ProTech TL-230 Low Profile Tilting Wall Mount for 42 – 90″ TVsSKU: CX9PPSCOPE$ 19.06
Complete programming kit suitable for the Scope Connexions advanced paging transmitter/encoder.
-
ProTech TL-240 Short Arm Heavy Duty Tilting Wall Mount for 17 – 37″ TVsSKU: FLINK4PROGSCOPE$ 11.43
-
-
Scope Pagetek 4 Programming Kit
SKU: PT10PROGSCOPE£26.00Includes programming software and interface lead [USB] to allow you to reconfigure the Scope Pagetek 3 and 4 paging transmitters.
-
ProTech TL-249 Slim Tilting Wall Mount for 32 – 55″ TVsSKU: MAR-600PRLDUSIMOCO$ 12.71
MAR-600PRLDU Mobile Programming Cable for the Simoco SDM610, SDM622 and SDM630 Digital Mobile Radios.
-
-
Protech TR-001 Tripod TV Mount for 32″ – 55″ TVsSKU: 7A0D100SZG1SIMOCO$ 50.84
For programming and reconfiguring the Simoco SDM730 Advanced DMR mobile radio.
-
Protech TR-002 Tripod TV Mount for 32″ – 65″ TVsSKU: 5A0DS00SZG1SIMOCO$ 50.84
Simoco SDP560 Programming Lead
-
Protech Triple Screen 40″ – 55″ Menu Board Wall MountSKU: GA0M500SZG1SIMOCO$ 95.76
Simoco SDP660 Programming lead suitable for use with either the Simoco SDP650 and SDP660 DMR radios or the SRP9170.
-
Protech Triple Screen 40″ – 55″ Video wall /Menu Board Wall Mount With Optional Ceiling Mount (Upto 36 inches drop)SKU: 7A0M500SZG1SIMOCO$ 99.73
Simoco SDP750 and SDP760 programming cable. Allows you to reconfigure radio parameters via a PC.
-
Protech Triple Screen 40″ – 55″ Video wall /Menu Board Wall Mount With Optional Ceiling Mount (Upto 59 inches drop)SKU: MA-PROGSIMOCO$ 92.90
The MA-PROG programming kit is compatible with the Simoco SRM9000 series mobile radio/base station.
-
Protech TL-202 Heavy Duty Tilting TV Wall mount for 37 – 70″ TVsSKU: PAR-9180PRLDUSIMOCO$ 19.06
The PAR-9180PRLDU USB programming lead is compatible with the Simoco SRP9000 series portable radios including the SRP9170 and SRP9180 models.
-
Protech TL-210 Heavy Duty Tilting Curved TV Wall Mount for 37 – 70″ TVsSKU: TSF-PROGSIMOCO$ 19.06
The TSF-PROG programming kit is compatible with the Simoco TSFLite and TSF2000 series base stations.
-
Protech TL-213 Tilting Wall Mount for 32-65 inch TVSKU: MAR-9000PRLDUSIMOCO$ 13.98
Programming lead suitable for the Simoco SRM, TSF and Xfin radio products.
-
Protech TL-214 Tilting Slim Wall Mount For 42-80 Inch TVsSKU: TMAA21-01TAIT$ 19.06
The TMAA21-01 cable socket (DB15) to plug (RJ45) is compatible with the Tait TM8000, TM8000 XB and T-S8107 series mobile radios.
-
PROTECH TL-215L Heavy Duty Tilting Wall Mount For 42-90 Inch TVsSKU: TMAA20-00TAIT$ 38.13
The TMAA20-00 programming kit is compatible with the Tait TM8000, TM8000 CB and T-S8107 series mobile radios.
-
Protech TL-220 X-Large Heavy Duty Tilting TV Wall Mount for 60 – 100″ TVsSKU: TMAA30-03TAIT$ 63.55
The TMAA30-03 adapter connects the RJ45 to the DB15. Compatible with the Tait TM8000, TM8000 XB and T-S8107 series mobile radios.
-
ProTech TL-221 Heavy Duty Tilting Wall Mount for 32 – 50″ TVsSKU: TMAA20-02TAIT$ 13.98
The TMAA20-02 adapter connects the RJ45 to the DB9. Compatible with the Tait TM8000, TM8000 XB and T-S8107 series mobile radios.
-
ProTech TL-222 Heavy Duty Tilting Wall Mount for 32 – 65″ TVsSKU: TMAA21-00TAIT$ 15.88
The TMAA21-00 service kit is compatible with the Tait TM8000, TM8000 XB and T-S8107 series mobile radios. Supplied with product support CD, service manual, programming/calibration leads and radio test unit.
-
ProTech TL-223 Pivoting Wall Mount for 13 – 27″ TVsSKU: TMAA20-04TAIT$ 9.53
The TMAA20-04 socket/plug adapter is compatible with the Tait TP8100, TM8000, TM8000 XB and T-S8107 series portable/mobile radios.
-
ProTech TL-224 (NT-110 )Super Slim Wall Mount for 13 – 27″ TVs/MonitorsSKU: T02-00031-0001TAIT$ 6.35
Tait TM81/82/93/TP81/93 Programming & Calibration Kit. Suitable for use with the Tait TP8 analogue, TP9 digital and TM8000 series mobile radios.
-
ProTech TL-225 Heavy Duty Tilting Wall Mount for 42 -82″ TVsSKU: TPA-SV-006TAIT$ 22.24
The TPA-SV-006 radio programming lead is compatible with the Tait TP8100 series portable radios & TM8000 mobile radios.
-
-
-
-
ProTech TL-230 Low Profile Tilting Wall Mount for 42 – 90″ TVsSKU: TTI-PROGTTI$ 19.06
Complete programming kit for the TTi TX1000U licence free portable radio.
-
ProTech TL-240 Short Arm Heavy Duty Tilting Wall Mount for 17 – 37″ TVsSKU: CB000262A01VERTEX$ 11.43
USB programming lead for the Vertex EVX-S24 digital radio.
Software included.
-
ProTech TL-245 Short Arm Heavy Duty Tilting Wall Mount for 17 – 42″ TVsSKU: CT-124AVERTEX$ 12.71
CT-124A Vertex VX 410 Flash ROM Lead
-
ProTech TL-249 Slim Tilting Wall Mount for 32 – 55″ TVsSKU: CT-27VERTEX$ 12.71
The CT-27 cloning cable is compatible with a range of Yaesu Vertex/Standard portable radios.
-
ProTech TL-250 Slim Tilting Wall Mount for 37- 70″ TVsSKU: FIF-12VERTEX$ 15.88
The FIF-12 USB interface adapter and leads is for use with the CT-106 programming cable. Used with various Vertex VX Series portable radios.
-
Protech TR-001 Tripod TV Mount for 32″ – 55″ TVsSKU: FIF-10AVERTEX$ 50.84
The FIF-10A USB interface cable is for use with the CT-105/106/108 programming cable interface and is compatible with a range of Yaesu Vertex/Standard mobile and portable radios.
-
Protech TR-002 Tripod TV Mount for 32″ – 65″ TVsSKU: SVC-1200VERTEX$ 50.84
The SV-1200 service kit is compatible with the Vertex/Standard VX-1210 transceiver.
-
Protech Triple Screen 40″ – 55″ Menu Board Wall MountSKU: CT-62/CE-77VERTEX$ 95.76
Complete programming kit for the Vertex VX-1700 HF radio models.
-
Protech Triple Screen 40″ – 55″ Video wall /Menu Board Wall Mount With Optional Ceiling Mount (Upto 36 inches drop)SKU: CT-62VERTEX$ 99.73
CT-62 Programming Cable for VX-1700
-
Protech Triple Screen 40″ – 55″ Video wall /Menu Board Wall Mount With Optional Ceiling Mount (Upto 59 inches drop)SKU: CT-104AVERTEX$ 92.90
Also suitable for VX-4100/4200 mobile radios. Connects to FIF-10A
-
Protech TL-202 Heavy Duty Tilting TV Wall mount for 37 – 70″ TVsSKU: CT-126VERTEX$ 19.06
Programming cable suitable for Vertex radios:-
– VX-2100
– VX-2200
– VX-4100
– VX-4200
-
Protech TL-210 Heavy Duty Tilting Curved TV Wall Mount for 37 – 70″ TVsSKU: CT-106VERTEX$ 19.06
The CT-106 programming cable interface is for use with the FIF-10A USB interface adapter and is compatible with a range of Yaesu Vertex/Standard portable radios.
-
Protech TL-213 Tilting Wall Mount for 32-65 inch TVSKU: CT-42VERTEX$ 13.98
The CT-42 programming cable is compatible with a range of Yaesu Vertex/Standard portable radios.
-
Protech TL-214 Tilting Slim Wall Mount For 42-80 Inch TVsSKU: CT-124BVERTEX$ 19.06
CT-124B Vertex VX-410 Firmware Update Lead
-
PROTECH TL-215L Heavy Duty Tilting Wall Mount For 42-90 Inch TVsSKU: FIF-8VERTEX$ 38.13
FIF-8 Vertex VX-410 Flash ROM Writer
-
Protech TL-220 X-Large Heavy Duty Tilting TV Wall Mount for 60 – 100″ TVsSKU: VPL-1VERTEX$ 63.55
The VPL-1 programming kit is compatible with the Yaesu Vertex/Standard VX-4100E series mobile radios.
-
ProTech TL-221 Heavy Duty Tilting Wall Mount for 32 – 50″ TVsSKU: CT-153VERTEX$ 13.98
Allows cloning from mobiles to portables via accessory/programming socket. Suitable for Vertex VX-450, VX-454 and VX-459 portable radios.
-
ProTech TL-222 Heavy Duty Tilting Wall Mount for 32 – 65″ TVsSKU: CT-72VERTEX$ 15.88
The CT-72 radio clone cable is compatible with the Yaesu Vertex/Standard VX-5500 mobile radio.
-
ProTech TL-223 Pivoting Wall Mount for 13 – 27″ TVsSKU: CT-70VERTEX$ 9.53
The CT-70 radio programming cable interface is for use with the CT-29 programming cable PC interface. Compatible with the Yaesu Vertex/Standard VX-5500 mobile radio.
-
ProTech TL-224 (NT-110 )Super Slim Wall Mount for 13 – 27″ TVs/MonitorsSKU: CT-105VERTEX$ 6.35
The CT-105 programming cable interface is for use with the FIF-10A USB interface adapter and is compatible with the Yaesu Vertex/Standard VX-5500 mobile radio.
-
ProTech TL-225 Heavy Duty Tilting Wall Mount for 42 -82″ TVsSKU: VX-VPL-1DVERTEX$ 22.24
The VX-VPL-1D programming kit is compatible with the Yaesu Vertex/Standard VX-7000 and VX-9000 base stations.
-
ProTech TL-226 Heavy Duty Tilting Wall Mount for 42 – 90″ TVsSKU: CT-109VERTEX$ 31.77
The CT-109 programming cable kit is compatible with the Yaesu Vertex/Standard VX-920E series portable radio.
-
ProTech TL-227 Slim Tilting Wall Mount for 32 – 55″ TVsSKU: CT-108VERTEX$ 12.71
The CT-108 programming cable interface is for use with the FIF-10A USB interface adapter and is compatible with the Yaesu Vertex/Standard VX-920E series portable radio.
-
ProTech TL-228 Slim Tilting Wall Mount for 37″ – 70″ TVsSKU: CT-116VERTEX$ 15.88
The CT-116 radio clone cable is compatible with the Yaesu Vertex/Standard VX-920E series portable radio.
-
ProTech TL-230 Low Profile Tilting Wall Mount for 42 – 90″ TVsSKU: CT-4VERTEX$ 19.06
The CT-4 cloning cable is compatible with the Yaesu Vertex/Standard VX-4100E and VX-2100E series mobile radios.
-
ProTech TL-240 Short Arm Heavy Duty Tilting Wall Mount for 17 – 37″ TVsSKU: CT-150VERTEX$ 11.43
Connects PC to rear of Vertex VXD series mobile radios and base stations for programming.
-
ProTech TL-245 Short Arm Heavy Duty Tilting Wall Mount for 17 – 42″ TVsSKU: CT-151VERTEX$ 12.71
For test and alignment of VXD mobile radios/base stations.
Connects PC to rear of radio.