Gallery Pots
In order to get the best out of your radio system we offer a complete range of programming equipment. These can be purchased with just the software or with the interface leads and will allow you to expand the capability of your radio by enabling additional features as well as giving you access to operating frequencies. Programming can be quite complicated so we are able to provide online or telephone assistance to ensure your radios perform as expected. Just call us on +44 [0]1332 363135 and select Option 2 for technical support. Alternatively you can e mail us at [email protected]
-
Box Form VaseSKU: HFPROGBARRETT$ 91.63The HFPROG programming kit is compatible with the 2040 and 2050 transceivers.
-
Large Egg Form PotSKU: PMKN4013MOTOROLA$ 97.39DMR portable radio programming, test and alignment cable. Compatable with the DP3000 portable radio range
-
Large Flat JugSKU: CPROG-DTExENTEL$ 99.79For updating and changing configurations of the Entel DT series radios use the CPROG-DTEx lead with the appropriate software.
-
Small Egg Form PotSKU: CSP450ENTEL$ 97.33For powering the Entel DX4 series DMR radios without a standard CNB series battery.
-
Small Flat JugSKU: EPROG-DXENTEL$ 91.95USB programming lead suitable for use with the Entel DX4 series radios.
-
Box Form VaseSKU: HT-CLNENTEL$ 91.63
The HT-CLN clone lead is compatible with the Entel HT446 and HT700 series portable radios.
-
Large Egg Form PotSKU: EPROG-HTENTEL$ 97.39
Entel HT700 Series 2.0 programming kit. Includes software, programming lead with serial connector.
-
Large Flat JugSKU: HX-CLNENTEL$ 99.79
The HX-CLN clone lead is compatible with the Entel HX400 and HX446 series portable radios.
-
Small Egg Form PotSKU: EPROG-RPENTEL$ 97.33
Programming lead and software for Entel RP500 Series base station/repeater.
-
Small Flat JugSKU: T9101606YAESU$ 91.95
Programming cable for Yaesu FTA series air band portable radios.
-
Box Form VaseSKU: PC26HYT$ 91.63
The PC26 programming cable is compatible with a range of HYT radios.
-
Large Egg Form PotSKU: PC25HYT$ 97.39
The PC25 programming cable is compatible with the HYT TC780 and TC3000s/PKTC3600s series portable radios.
-
Large Flat JugSKU: PC27HYT$ 99.79
The PC27 programming cable with USB connector is compatible with the HYT TC265s/TC365s radio.
-
Small Egg Form PotSKU: CP01HYT$ 97.33
The CP01 cloning cable is compatible with the HYT TC265s/TC365s radio.
-
Small Flat JugSKU: PC23HYT$ 91.95
The PC23 programming cable is compatible with the HYT TC265s/TC365s radio.
-
Box Form VaseSKU: PC18HYT$ 91.63
The PC18 programming cable is compatible with the HYT TC3000s/PKTC3600s radios.
-
Large Egg Form PotSKU: PC19HYT$ 97.39
The PC19 programming cable is compatible with s range of HYT radios.
-
Large Flat JugSKU: CP05HYT$ 99.79
The CP05 cloning cable is compatible with the HYT TC518 and TC610/TC620/TC700/TC700Ex series radios.
-
-
Small Flat JugSKU: PKTC620HYT$ 91.95
The PKTC620 programming lead and software is compatible with the HYT TC620 radio.
-
Box Form VaseSKU: PKTC700HYT$ 91.63
The PKTC700 programming kit is compatible with the HYT TC700 radio.
-
Large Egg Form PotSKU: CP03HYT$ 97.39
The CP03 cable is compatible with the HYT TC-780 and TC-3000s/TC-3600s series portable radios.
-
Large Flat JugSKU: PKTC700ExHYT$ 99.79
The PKTC700Ex programming kit is compatible with the HYT TC700Ex radio.
-
Small Egg Form PotSKU: PKTM600HYT$ 97.33
The PKTM600 programming kit is compatible with the HYT TM600 and TM610 mobile radios.
-
Small Flat JugSKU: CP06HYT$ 91.95
The CP06 cloning cable is compatible with the HYT TM600, TM610 and TM800 mobile radios.
-
Box Form VaseSKU: PC21HYT$ 91.63
The PC21 programming cable is compatible with the TR800 base station repeater and TM600/TM610/TM800 mobile radios.
-
Large Egg Form PotSKU: PC24HYT$ 97.39
The HYT PC24 data transmission cable is compatible with the HYT TM800 mobile radio.
-
Large Flat JugSKU: PKTM800HYT$ 99.79
The PKTM800 programming kit is compatible with the HYT TM800 mobile radio.
-
Small Egg Form PotSKU: PC08HYT$ 97.33
The PC08 universal programming cable is suitable for a range of HYT radios.
-
Small Flat JugSKU: PC155HYTERA$ 91.95
Hytera BP515LF Programming Cable. The PC155 programming cable can be used to reconfigure the Hytera BP515LF and AP515LF portable radios.
-
-
-
Large Flat JugSKU: PC109HYTERA$ 99.79
Radio programming cable designed for use with the MD615 and MD625 series DMR mobile radios.
-
Small Egg Form PotSKU: PC43HYTERA$ 97.33
PC43 DB26-Connector dispatching cable
For Hytera MD700 Series Digital Mobile Radios.
-
Small Flat JugSKU: PC47HYTERA$ 91.95
PC47 Download and Programming Cable
For Hytera MD700 Series Digital Mobile Radios.
-
Box Form VaseSKU: BC00004HYTERA$ 91.63
Complete programming kit for the Hytera MD785 DMR mobile radio.
-
Large Egg Form PotSKU: PC40HYTERA$ 97.39
PC40 Data Transmission Cable (RoHS)
For Hytera MD700 Series Mobile Digital Radio.
-
Large Flat JugSKU: PC37HYTERA$ 99.79
PC37 Programming Cable (USB Port) (RoHS)
For Hytera MD700 Series Mobile Digital Radios.
-
Small Egg Form PotSKU: SK008HYTERA$ 97.33
Includes programming software and interface lead for Hytera MD785 mobile radios.
-
Small Flat JugSKU: PC87HYTERA$ 91.95
Back-to-back Data Cable with Ignition Function (DB26 to DB26), 0.6m Length
-
Box Form VaseSKU: PC91HYTERA$ 91.63
Data Cable (DB26 connector with Ignition and Speaker cable), 3m Length
-
Large Egg Form PotSKU: PC70HYTERA$ 97.39
Data cable for Hytera MD785i DMR mobile radio with a DB26 to DB9 connector. Cable length 1.2 metres.
-
Large Flat JugSKU: POA108HYTERA$ 99.79
Hytera MD785i DMR mobile radio data cable with DB26 to DB9 male connector. Cable length 1.2 metres.
-
Small Egg Form PotSKU: RC07HYTERA$ 97.33
A recording cable terminated at one end by a DB26 connector and RJ11 at the other end. Cable length is 1.2 metres.
-
Small Flat JugSKU: PC85HYTERA$ 91.95
Programming Cable (USB to 10-pin Aviation Connector) (with signal amplification) 1.5m Length
-
Box Form VaseSKU: PC80HYTERA$ 91.63
USB to Micro USB programming cable for the Hytera MD785i DMR radio. Cable length is 1.5 metres.
-
Large Egg Form PotSKU: PC39HYTERA$ 97.39
Data transmission cable (PEI). Also used for firmware upgrade of the radio mother board.
-
Large Flat JugSKU: PC68HYTERA$ 99.79
An extra long [5 metres] USB data cable for the Hytera MT680 Plus TETRA radio.
-
Small Egg Form PotSKU: PC35HYTERA$ 97.33
USB style programming cable also used for firmware upgrades to the Hytera MT680 Plus radio. Operates via the front panel.
-
Small Flat JugSKU: SK003HYTERA$ 91.95
Includes the PC69 cable and software.
Suitable for the Hytera PD3 series portable radios.
-
Box Form VaseSKU: PC69HYTERA$ 91.63
The PC69 programming lead allows you to change the operating frequencies and other parameters of the PD355 and PD365 digital migration radio.
-
Large Egg Form PotSKU: SK004HYTERA$ 97.39
Includes the PC76 programming cable and software.
Suitable for the Hytera PD4 and PD5 DMR portable radios.
-
Large Flat JugSKU: PC76HYTERA$ 99.79
Connects Hytera PD400 series radios to PC via USB port for programming.
-
Small Egg Form PotSKU: SK005HYTERA$ 97.33
Hytera PD5 series programming kit comprising PC63 cable and software.
-
Small Flat JugSKU: PC63HYTERA$ 91.95
Programming cable for the Hytera PD505 and PD565 digital portable radios.
-
Box Form VaseSKU: SK006HYTERA$ 91.63
Hytera PD6 Series Programming Kit. Includes software and PC45 cable
-
Large Egg Form PotSKU: PC38HYTERA$ 97.39
Connects the radio to a PC to allow programming of the Hytera PD705 and PD785 digital portable radios.
-
Large Flat JugSKU: SK007HYTERA$ 99.79
For use with The Hytera PD715Ex and PD795Ex ATEX approved portable radios.
Includes software and interface lead.
-
Small Egg Form PotSKU: PC143HYTERA$ 97.33
Hytera PNC550 Data Cable. USB to Type C. 1 metre length
-
-
-
Large Egg Form PotSKU: PC64HYTERA$ 97.39
PC programming cable for updating configuration of the Hytera PT580H TETRA radio terminal.
-
Large Flat JugSKU: PC36HYTERA$ 99.79
A PC programming cable with virtual USB port for the Hytera PT580H Plus TETRA radio terminal.
-
Small Egg Form PotSKU: PC90HYTERA$ 97.33
A serial to USB adapter cable to allow programming of the Hytera PT580H Plus TETRA radio terminal.
-
Small Flat JugSKU: PC67HYTERA$ 91.95
USB programming cable for the Hytera PT790Ex I.S TETRA radio terminal.
-
Box Form VaseSKU: SK009HYTERA$ 91.63
Hytera RD625 programming Kit. Programming kit includes PC75 cable and software. For programming and configuring the RD625 DMR repeater.
-
Large Egg Form PotSKU: PC75HYTERA$ 97.39
Hytera RD625 programming lead. Order programming software [SK008] separately.
-
Large Flat JugSKU: BC00005HYTERA$ 99.79
Programming kit (programming cable PC37 + Disc)for RD96 Series Digital Repeaters.
-
Small Egg Form PotSKU: PC49HYTERA$ 97.33
Back to back data cable for RD96 Series Digital Repeaters.
-
-
Box Form VaseSKU: PC93HYTERA$ 91.63
The PC93 programming cable allows users to reprogram the Hytera VM685 remote video speaker microphone.
-
Large Egg Form PotSKU: BC00008HYTERA$ 97.39
Programming software and lead for the Hytera X1 and X1p covert digital radios.
-
-
Small Egg Form PotSKU: OPC-592ICOM$ 97.33
The OPC-591 cloning cable adapter requires the OPC478 cloning cable. It is compatible with the ICOM IC-A110 air band and IC-F7000 HF radios.
-
Small Flat JugSKU: OPC-1529ICOM$ 91.95
The OPC-1529 connection cable (RS-232C type) is compatible with the ICOM IC-E91 portable radio.
-
Box Form VaseSKU: OPC-478UCICOM$ 91.63
OPC-478UC USB Cloning Lead USB Port to Radio. Used on most ICOM mobile and portable radios.
-
Large Egg Form PotSKU: OPC-1122ICOM$ 97.39
OPC-1122 programming cable for all ICOM mobile radios with an RJ45 8 pin microphone socket.
Suitable for a range of ICOM mobile radios including the IC-F110 and IC-F210 models.
-
Large Flat JugSKU: OPC-822ICOM$ 99.79
ICOM IC-F1610 and IC-F1710 mobile radio interface cable for MAP 27.
-
Small Egg Form PotSKU: OPC-474ICOM$ 97.33
The OPC-474 cloning cable is compatible with a range of ICOM radios.
-
Small Flat JugSKU: OPC-1862ICOM$ 91.95
USB style programming cable for ICOM IC-F3202DEx and IC-F4202DEx portable radios. Requires CSF3200DEX.001 software supplied separately.
-
Box Form VaseSKU: OPC-1870ICOM$ 91.63
Permits radio data transfer between 2 portable radios including the ICOM IC-F3262D/4262D series portable radios.
-
Large Egg Form PotSKU: OPC-1871ICOM$ 97.39
For transferring date from portable radio to mobile radios. Compatible with ICOM IC-F3262D/4262D series portable radios.
-
Large Flat JugSKU: OPC-2362ICOM$ 99.79
The OPC-2362 lets you easily transfer radio data from a ICOM IC-F3400D series IDAS portable radio to a ICOM IC-F5400D series IDAS mobile radio.
-
Small Egg Form PotSKU: OPC-1122UICOM$ 97.33
The OPC-1122U USB cloning cable is compatible with the ICOM IC-F5022 mobile radio and IC-FR5100 series base station repeater.
-
Small Flat JugSKU: OPC-966.002ICOM$ 91.95
The OPC-966.002 cloning lead is compatible with a range of ICOM radios.
-
-
-
Large Flat JugSKU: OPC2338ICOM$ 99.79
Change radio parameters and configuration with the OPC2338 programming cable. Requires CSF52D programming software [sold separately].
-
Small Egg Form PotSKU: OPC-966.001ICOM$ 97.33
The OPC-966.001 serial cloning cable is compatible with the ICOM IC-F61M and IC-F51V series radio.
-
-
-
Large Egg Form PotSKU: OPC-1655ICOM$ 97.39
The OPC-1655 cable adapter is compatible with the ICOM IC-M33 marine radio. It is for use with the OPC-478/UC cloning cable.
-
Large Flat JugSKU: OPC-980ICOM$ 99.79
The OPC-980 cloning cable adapter is compatible with the ICOM IC-GM651, IC-M505 and IC-M603 marine mobile radios.
-
Small Egg Form PotSKU: OPC-2382ICOM$ 97.33
ICOM IC-M605E Conversion Cable. The OPC-2382 is a programming conversion cable that is used with the OPC-478UC cable [USB].
-
Small Flat JugSKU: OPC-922ICOM$ 91.95
The OPC-922 cloning cable adapter is compatible with the ICOM IC-M71, IC-GM1600E and IC-M90E marine radios.
-
Box Form VaseSKU: CS-R20ICOM$ 91.63
The CS-R20 cloning software is supplied with a USB cloning cable. It is compatible with the ICOM IC-R20 air band radio.
-
Large Egg Form PotSKU: OPC-1402ICOM$ 97.39
Maintenance cable suitable for use with the ICOM IP1000C Advanced Radio system server.
-
Large Flat JugSKU: KPG-36XMKENWOOD$ 99.79
Programming cable for the Kenwood NX-5200/5300 NXDN/P25 digital portable radios. Requires KPG-D1E programming software.
-
Small Egg Form PotSKU: KPG-46XMKENWOOD$ 97.33
Suitable for use with Kenwood NX-5700/NX-5800 multi mode mobile radios. Requires programming software – KPG-D1E [sold separately].
-
Small Flat JugSKU: KPG-46UKENWOOD$ 91.95
Kenwood USB programming lead for the following Kenwood radios:-
– NX-700/NX-800
– NX-720/NX-820
– NXR-710/NXR-810
– TKR-D710/TKR-D810
-
Box Form VaseSKU: KPG-46AKENWOOD$ 91.63
The KPG-46A programming kit is compatible with a range of Kenwood mobile radios and base stations.
-
Large Egg Form PotSKU: KCT-53UKENWOOD$ 97.39
The KCT-53U serial to USB adapter is compatible with a range of Kenwood radios and base stations and is supplied with drivers.
-
Large Flat JugSKU: KPG-22UKENWOOD$ 99.79
Suitable for programming a range of Kenwood portable radios with the Kenwood 2 pin accessory socket.
-
Small Egg Form PotSKU: KPG-22AKENWOOD$ 97.33
The KPG-22A serial programming cable is compatible with the Kenwood TK-3301, TK-3201, TK-2202 series, TK-2170 series and TK-2302 series portable radios.
-
Small Flat JugSKU: KPG-186UKENWOOD$ 91.95
Programming lead for use with the Kenwood TK-3601D licence free digital radio.
-
Box Form VaseSKU: KPG-36AKENWOOD$ 91.63
Serial programming lead for use with Kenwood TK-D series portable radios. Should be used with KPG-166DM software [sold separately].
-
Large Egg Form PotSKU: KPG-36UKENWOOD$ 97.39
USB programming cable for Kenwood TK-D series portable radios. Requires KPG-166DM programming software.
-
Large Flat JugSKU: PR-SL1000-01MAXON$ 99.79
Programming cable and software suitable for the Maxon SL1000 portable radio.
-
Small Egg Form PotSKU: PK-SL1000-02MAXON$ 97.33
Permits radio data to be transferred from radio to radio. Suitable for Maxon SL1000/S5.
-
Small Flat JugSKU: PRG-G15MIDLAND$ 91.95
Programming kit including software for Midland G18. Required to enable the voice compander and FM radio functions.
-
Box Form VaseSKU: HKKN4027AMOTOROLA$ 91.63
Change the configuration of your Motorola CLPe two way radio with the HKKN4027A cable kit.
-
Large Egg Form PotSKU: HKKN4028AMOTOROLA$ 97.39
Transfer your radio configuration to other Motorola CLPe two way radios with the HKKN4028A cloning cable.
-
Large Flat JugSKU: FKN8113AMOTOROLA$ 99.79
Suitable for use with the Motorola CM series mobile radio models.
-
Small Egg Form PotSKU: FKN8096BMOTOROLA$ 97.33
Flash upgrade adapter for Motorola CM140; CM160; CM340; CM360 mobile radios.
-
Small Flat JugSKU: RKN4081CMOTOROLA$ 91.95
Avoids the need for the RLN4008 RIB box when programming CM and GM series mobile radios.
-
Box Form VaseSKU: RKN4083BMOTOROLA$ 91.63
Connects the Motorola CM or GM series mobile radio to the RIB box
-
Large Egg Form PotSKU: PMKN4004MOTOROLA$ 97.39
Suitable for programming Motorola CP040 series portable radios.
-
-
Small Egg Form PotSKU: PMKN4003BMOTOROLA$ 97.33
2.5mm connectors – suitable for radio to radio cloning between Motorola CP040 portable radios.
-
Small Flat JugSKU: 6686533Z01MOTOROLA$ 91.95
Service tool for use with the Motorola CP and DP1000 series portable radios
-
Box Form VaseSKU: PMKN4072AMOTOROLA$ 91.63
For connection via front microphone socket on Motorola DM series radios.
-
Large Egg Form PotSKU: PMKN4016BMOTOROLA$ 97.39
For connection to Motorola DM series radios or test box.
-
Large Flat JugSKU: PMKN4010BMOTOROLA$ 99.79
For programming Motorola DM series radios via rear facility connector.
-
Small Egg Form PotSKU: PMKN4147AMOTOROLA$ 97.33
Connects to the microphone socket on the DM1000 control head for radio programming.
-
Small Flat JugSKU: HKN6184CMOTOROLA$ 91.95
Allows programming of Motorola DM3000 series mobile radios via the microphone socket on the control head.
-
Box Form VaseSKU: PMKN4040AMOTOROLA$ 91.63
Telemetry cable suitable for Motorola DP3000 and DP4000 portable radios.
-
Large Egg Form PotSKU: PMKN4156AMOTOROLA$ 97.39
Test cable for use with Motorola DP series digital DMR radio models.
-
Large Flat JugSKU: 3271133M01MOTOROLA$ 99.79
Used on Motorola DP series digital portable radios to seal the vacuum hose to radio chassis connection.
-
Small Egg Form PotSKU: 5871134M01MOTOROLA$ 97.33
Connects the vacuum hose to the radio chassis. Compatible with the Motorola DP series portable radios.
Used to re pressure the radio and seal the unit after maintenance.
-
Small Flat JugSKU: NTN4265AMOTOROLA$ 91.95
Pressure pump for re pressurising the following Motorola radio series after servicing:-
DP2400; DP2600
DP3400; DP3600
DP4400; DP4600;DP4800
GP344/GP388
-
Box Form VaseSKU: NLN9839AMOTOROLA$ 91.63
Includes gauge and hose. Order seal and connector separately.
Used with Motorola DP and GP Compact series radios.
-
Large Egg Form PotSKU: PMKN4115BMOTOROLA$ 97.39
Programming cable for Motorola DP2400 and DP2600 digital radio models.
-
Large Flat JugSKU: PMKN4071AMOTOROLA$ 99.79
Enables the MOTOTRBO portable radio to be connected to an external non-PC based application.
-
Small Egg Form PotSKU: PMKN4012MOTOROLA$ 97.33
DMR portable radio programming cable, compatable with the DP3000 portable radio range
-
Small Flat JugSKU: PMKN4117BMOTOROLA$ 91.95
Used when programming the Motorola DP2400; DP2600 and DP3441 compact series radios.
-
Box Form VaseSKU: GTF374CMOTOROLA$ 91.63
Connects the radio to the RIB box for programming the Motorola GM series mobile radios.
-
Large Egg Form PotSKU: 6686119B01MOTOROLA$ 97.39
Designed to help with dismantling the Motorola GM series mobile radios.
-
Large Flat JugSKU: RKN4074MOTOROLA$ 99.79
Compatible for use with the Motorola Professional range of portable radios. Used with RLN4008 RIB box.
-
Small Egg Form PotSKU: 6680702Z01MOTOROLA$ 97.33
Special dismantling tool used with the Motorola GP series portable radios.
-
Small Flat JugSKU: RKN4075MOTOROLA$ 91.95
Eliminates the need for the RLN4008 RIB box when programming Motorola GP series radios.
-
Box Form VaseSKU: RLN4008MOTOROLA$ 91.63
Radio Interface Box [RIB] for use when programming Motorola GP and CP series portable radios.
-
Large Egg Form PotSKU: HLN9742DMOTOROLA$ 97.39
Used to flash upgrade the firmware on Motorola GP and GM series radios.
-
Large Flat JugSKU: EPN4042AMOTOROLA$ 99.79
Powers the radio interface box [RIB] instead of batteries. Used when programming Motorola GP/GM/CP and CM series radios.
-
Small Egg Form PotSKU: MDJMKN4125AMOTOROLA$ 97.33
Allows you to power the Motorola GP344 or GP388 GP compact series portable radios from an external power supply.
-
Small Flat JugSKU: MDJMKN4123MOTOROLA$ 91.95
Programming and test cable for the Motorola GP344 and GP388 radio models.
-
-
Large Egg Form PotSKU: DDN9957AMOTOROLA$ 97.39
Programming cable suitable for MTR3000 base stations.
-
Large Flat JugSKU: PMDN4077ARMOTOROLA$ 99.79
The PMDN4077AR programming cable is compatible with the Motorola P100 series portable radios.
-
Small Egg Form PotSKU: PMDN4076ARMOTOROLA$ 97.33
The PMDN4076AR cloning cable is compatible with the Motorola P100 series portable radios.
-
Small Flat JugSKU: PMKN4265AMOTOROLA$ 91.95
Motorola R7 Programming Cable. Suitable for configuring the Motorola R7 portable radio. Use with GMVN6241 CPS software.
-
Box Form VaseSKU: PMKN4231AMOTOROLA$ 91.63
Motorola R7 Test/Alignment Cable. A test and alignment cable suitable for use with the Motorola R7 DMR portable radio.
-
Large Egg Form PotSKU: 3080369B72MOTOROLA$ 97.39
Connects RLN4008 RIB to PC for programming GP and CP Series radios
-
Large Flat JugSKU: PMKN4128AMOTOROLA$ 99.79
Portable programming cable with TTR for the Motorola SL and DP Series of digital portable radios.
-
Small Egg Form PotSKU: 30009477001MOTOROLA$ 97.33
Programming and test cable for Motorola SLR5500 base station. Requires programming software [sold separately] – 30009477001
-
Small Flat JugSKU: HKKN4027MOTOROLA$ 91.95
Allows programming of the XT420 and XT460 with the HTML based customer programming software.
-
Box Form VaseSKU: HKKN4028MOTOROLA$ 91.63
Allows data to be transferred between radios. Suitable for the XT420 and XT460 PMR446 licence free radios.
-
Large Egg Form PotSKU: IXEN4007ARMOTOROLA$ 97.39
The IXEN4007AR USB programming kit is compatible with the Motorola XTNi and XTNiD licence free radios.
-
Large Flat JugSKU: 25-124330-01RMOTOROLA$ 99.79
Motorola programming cable with micro USB. Requires programming software GMVN5141 [sold separately]
-
-
Small Egg Form PotSKU: CX9PPSCOPE$ 97.33
Complete programming kit suitable for the Scope Connexions advanced paging transmitter/encoder.
-
-
-
Scope Pagetek 4 Programming Kit
SKU: PT10PROGSCOPE£26.00Includes programming software and interface lead [USB] to allow you to reconfigure the Scope Pagetek 3 and 4 paging transmitters.
-
Large Egg Form PotSKU: MAR-600PRLDUSIMOCO$ 97.39
MAR-600PRLDU Mobile Programming Cable for the Simoco SDM610, SDM622 and SDM630 Digital Mobile Radios.
-
-
Small Egg Form PotSKU: 7A0D100SZG1SIMOCO$ 97.33
For programming and reconfiguring the Simoco SDM730 Advanced DMR mobile radio.
-
-
Box Form VaseSKU: GA0M500SZG1SIMOCO$ 91.63
Simoco SDP660 Programming lead suitable for use with either the Simoco SDP650 and SDP660 DMR radios or the SRP9170.
-
Large Egg Form PotSKU: 7A0M500SZG1SIMOCO$ 97.39
Simoco SDP750 and SDP760 programming cable. Allows you to reconfigure radio parameters via a PC.
-
Large Flat JugSKU: MA-PROGSIMOCO$ 99.79
The MA-PROG programming kit is compatible with the Simoco SRM9000 series mobile radio/base station.
-
Small Egg Form PotSKU: PAR-9180PRLDUSIMOCO$ 97.33
The PAR-9180PRLDU USB programming lead is compatible with the Simoco SRP9000 series portable radios including the SRP9170 and SRP9180 models.
-
Small Flat JugSKU: TSF-PROGSIMOCO$ 91.95
The TSF-PROG programming kit is compatible with the Simoco TSFLite and TSF2000 series base stations.
-
Box Form VaseSKU: MAR-9000PRLDUSIMOCO$ 91.63
Programming lead suitable for the Simoco SRM, TSF and Xfin radio products.
-
Large Egg Form PotSKU: TMAA21-01TAIT$ 97.39
The TMAA21-01 cable socket (DB15) to plug (RJ45) is compatible with the Tait TM8000, TM8000 XB and T-S8107 series mobile radios.
-
Large Flat JugSKU: TMAA20-00TAIT$ 99.79
The TMAA20-00 programming kit is compatible with the Tait TM8000, TM8000 CB and T-S8107 series mobile radios.
-
Small Egg Form PotSKU: TMAA30-03TAIT$ 97.33
The TMAA30-03 adapter connects the RJ45 to the DB15. Compatible with the Tait TM8000, TM8000 XB and T-S8107 series mobile radios.
-
Small Flat JugSKU: TMAA20-02TAIT$ 91.95
The TMAA20-02 adapter connects the RJ45 to the DB9. Compatible with the Tait TM8000, TM8000 XB and T-S8107 series mobile radios.
-
Box Form VaseSKU: TMAA21-00TAIT$ 91.63
The TMAA21-00 service kit is compatible with the Tait TM8000, TM8000 XB and T-S8107 series mobile radios. Supplied with product support CD, service manual, programming/calibration leads and radio test unit.
-
Large Egg Form PotSKU: TMAA20-04TAIT$ 97.39
The TMAA20-04 socket/plug adapter is compatible with the Tait TP8100, TM8000, TM8000 XB and T-S8107 series portable/mobile radios.
-
Large Flat JugSKU: T02-00031-0001TAIT$ 99.79
Tait TM81/82/93/TP81/93 Programming & Calibration Kit. Suitable for use with the Tait TP8 analogue, TP9 digital and TM8000 series mobile radios.
-
Small Egg Form PotSKU: TPA-SV-006TAIT$ 97.33
The TPA-SV-006 radio programming lead is compatible with the Tait TP8100 series portable radios & TM8000 mobile radios.
-
-
-
-
Large Flat JugSKU: TTI-PROGTTI$ 99.79
Complete programming kit for the TTi TX1000U licence free portable radio.
-
Small Egg Form PotSKU: CB000262A01VERTEX$ 97.33
USB programming lead for the Vertex EVX-S24 digital radio.
Software included.
-
-
Box Form VaseSKU: CT-27VERTEX$ 91.63
The CT-27 cloning cable is compatible with a range of Yaesu Vertex/Standard portable radios.
-
Large Egg Form PotSKU: FIF-12VERTEX$ 97.39
The FIF-12 USB interface adapter and leads is for use with the CT-106 programming cable. Used with various Vertex VX Series portable radios.
-
Large Flat JugSKU: FIF-10AVERTEX$ 99.79
The FIF-10A USB interface cable is for use with the CT-105/106/108 programming cable interface and is compatible with a range of Yaesu Vertex/Standard mobile and portable radios.
-
Small Egg Form PotSKU: SVC-1200VERTEX$ 97.33
The SV-1200 service kit is compatible with the Vertex/Standard VX-1210 transceiver.
-
Small Flat JugSKU: CT-62/CE-77VERTEX$ 91.95
Complete programming kit for the Vertex VX-1700 HF radio models.
-
-
Large Egg Form PotSKU: CT-104AVERTEX$ 97.39
Also suitable for VX-4100/4200 mobile radios. Connects to FIF-10A
-
Large Flat JugSKU: CT-126VERTEX$ 99.79
Programming cable suitable for Vertex radios:-
– VX-2100
– VX-2200
– VX-4100
– VX-4200
-
Small Egg Form PotSKU: CT-106VERTEX$ 97.33
The CT-106 programming cable interface is for use with the FIF-10A USB interface adapter and is compatible with a range of Yaesu Vertex/Standard portable radios.
-
Small Flat JugSKU: CT-42VERTEX$ 91.95
The CT-42 programming cable is compatible with a range of Yaesu Vertex/Standard portable radios.
-
-
-
Large Flat JugSKU: VPL-1VERTEX$ 99.79
The VPL-1 programming kit is compatible with the Yaesu Vertex/Standard VX-4100E series mobile radios.
-
Small Egg Form PotSKU: CT-153VERTEX$ 97.33
Allows cloning from mobiles to portables via accessory/programming socket. Suitable for Vertex VX-450, VX-454 and VX-459 portable radios.
-
Small Flat JugSKU: CT-72VERTEX$ 91.95
The CT-72 radio clone cable is compatible with the Yaesu Vertex/Standard VX-5500 mobile radio.
-
Box Form VaseSKU: CT-70VERTEX$ 91.63
The CT-70 radio programming cable interface is for use with the CT-29 programming cable PC interface. Compatible with the Yaesu Vertex/Standard VX-5500 mobile radio.
-
Large Egg Form PotSKU: CT-105VERTEX$ 97.39
The CT-105 programming cable interface is for use with the FIF-10A USB interface adapter and is compatible with the Yaesu Vertex/Standard VX-5500 mobile radio.
-
Large Flat JugSKU: VX-VPL-1DVERTEX$ 99.79
The VX-VPL-1D programming kit is compatible with the Yaesu Vertex/Standard VX-7000 and VX-9000 base stations.
-
Small Egg Form PotSKU: CT-109VERTEX$ 97.33
The CT-109 programming cable kit is compatible with the Yaesu Vertex/Standard VX-920E series portable radio.
-
Small Flat JugSKU: CT-108VERTEX$ 91.95
The CT-108 programming cable interface is for use with the FIF-10A USB interface adapter and is compatible with the Yaesu Vertex/Standard VX-920E series portable radio.
-
Box Form VaseSKU: CT-116VERTEX$ 91.63
The CT-116 radio clone cable is compatible with the Yaesu Vertex/Standard VX-920E series portable radio.
-
Large Egg Form PotSKU: CT-4VERTEX$ 97.39
The CT-4 cloning cable is compatible with the Yaesu Vertex/Standard VX-4100E and VX-2100E series mobile radios.
-
Large Flat JugSKU: CT-150VERTEX$ 99.79
Connects PC to rear of Vertex VXD series mobile radios and base stations for programming.
-
Small Egg Form PotSKU: CT-151VERTEX$ 97.33
For test and alignment of VXD mobile radios/base stations.
Connects PC to rear of radio.