Spares
In order to get the best out of your radio system we offer a complete range of programming equipment. These can be purchased with just the software or with the interface leads and will allow you to expand the capability of your radio by enabling additional features as well as giving you access to operating frequencies. Programming can be quite complicated so we are able to provide online or telephone assistance to ensure your radios perform as expected. Just call us on +44 [0]1332 363135 and select Option 2 for technical support. Alternatively you can e mail us at [email protected]
-
Storm and Cyclone Replacement NutsSKU: HFPROGBARRETT$ 1.73The HFPROG programming kit is compatible with the 2040 and 2050 transceivers.
-
Electric Quad Bike Brake PadsSKU: PMKN4013MOTOROLA$ 5.89DMR portable radio programming, test and alignment cable. Compatable with the DP3000 portable radio range
-
Replacement Charging PortSKU: CPROG-DTExENTEL$ 11.85For updating and changing configurations of the Entel DT series radios use the CPROG-DTEx lead with the appropriate software.
-
Drive Shaft CV Boot for Explorer GTSKU: CSP450ENTEL$ 11.85For powering the Entel DX4 series DMR radios without a standard CNB series battery.
-
Electric Quad Bike Brake CalliperSKU: EPROG-DXENTEL$ 14.23USB programming lead suitable for use with the Entel DX4 series radios.
-
Electric Variable Speed Thumb ThrottleSKU: HT-CLNENTEL$ 15.42The HT-CLN clone lead is compatible with the Entel HT446 and HT700 series portable radios.
-
Electric Variable Speed ThrottleSKU: EPROG-HTENTEL$ 17.80Entel HT700 Series 2.0 programming kit. Includes software, programming lead with serial connector.
-
MoEco DVI to DB9 encoder/photocell connection cableSKU: HX-CLNENTEL$ 15.48The HX-CLN clone lead is compatible with the Entel HX400 and HX446 series portable radios.
-
Sojet MoEco Printhead CableSKU: EPROG-RPENTEL$ 59.86Programming lead and software for Entel RP500 Series base station/repeater.
-
Sojet MoEco Spare PrintheadSKU: T9101606YAESU$ 97.75Programming cable for Yaesu FTA series air band portable radios.
-
Encoder cable, DB15 To Sick Connector; 2M Standard LengthSKU: PC26HYT$ 90.17The PC26 programming cable is compatible with a range of HYT radios.
-
Fork Sensor & Cable for SojetSKU: PC25HYT$ 97.64The PC25 programming cable is compatible with the HYT TC780 and TC3000s/PKTC3600s series portable radios.
-
Positioning Rail for B80/B85 printerSKU: PC27HYT$ 77.39The PC27 programming cable with USB connector is compatible with the HYT TC265s/TC365s radio.
-
Diffuse Sensor & Cable for SojetSKU: CP01HYT$ 94.91The CP01 cloning cable is compatible with the HYT TC265s/TC365s radio.
-
Sojet DVI – DB9 Accessory Connection BoxSKU: PC23HYT$ 46.45The PC23 programming cable is compatible with the HYT TC265s/TC365s radio.
-
Sojet MoEco EncoderSKU: PC18HYT$ 94.91The PC18 programming cable is compatible with the HYT TC3000s/PKTC3600s radios.
-
Spare Sojet V2N Print HeadSKU: PC19HYT$ 95.63The PC19 programming cable is compatible with s range of HYT radios.
-
Sojet MoEco DVI – DB9 Accessory Connection BoxSKU: CP05HYT$ 47.62The CP05 cloning cable is compatible with the HYT TC518 and TC610/TC620/TC700/TC700Ex series radios.
-
Sick Encoder Bracket. Heavy Duty, Torsion Spring.SKU: PKTC610HYT$ 94.91The PKTC610 is compatible with the HYT TC610 radio.
-
Sick Programable Encoder For <=200M/MinSKU: PKTC620HYT$ 98.05The PKTC620 programming lead and software is compatible with the HYT TC620 radio.
-
Stacked Beacon Ink Alarm for Sojet MoEcoSKU: PKTC700HYT$ 95.25The PKTC700 programming kit is compatible with the HYT TC700 radio.
-
4pcs Set Shuttle Race guide Shaft (Complete)SKU: CP03HYT$ 27.29The CP03 cable is compatible with the HYT TC-780 and TC-3000s/TC-3600s series portable radios.
-
Bobbin Case Spring screwSKU: PKTC700ExHYT$ 0.55The PKTC700Ex programming kit is compatible with the HYT TC700Ex radio.
-
Brother Foot controlSKU: PKTM600HYT$ 27.29The PKTM600 programming kit is compatible with the HYT TM600 and TM610 mobile radios.
-
Domestic Machine feed gear setSKU: CP06HYT$ 6.02The CP06 cloning cable is compatible with the HYT TM600, TM610 and TM800 mobile radios.
-
Storm and Cyclone Replacement NutsSKU: PC21HYT$ 1.73
The PC21 programming cable is compatible with the TR800 base station repeater and TM600/TM610/TM800 mobile radios.
-
Electric Quad Bike Brake PadsSKU: PC24HYT$ 5.89
The HYT PC24 data transmission cable is compatible with the HYT TM800 mobile radio.
-
Replacement Charging PortSKU: PKTM800HYT$ 11.85
The PKTM800 programming kit is compatible with the HYT TM800 mobile radio.
-
Drive Shaft CV Boot for Explorer GTSKU: PC08HYT$ 11.85
The PC08 universal programming cable is suitable for a range of HYT radios.
-
Electric Quad Bike Brake CalliperSKU: PC155HYTERA$ 14.23
Hytera BP515LF Programming Cable. The PC155 programming cable can be used to reconfigure the Hytera BP515LF and AP515LF portable radios.
-
-
Electric Variable Speed ThrottleSKU: PC79HYTERA$ 17.80
Hytera MD6 Series mobile radio programming lead.
-
MoEco DVI to DB9 encoder/photocell connection cableSKU: PC109HYTERA$ 15.48
Radio programming cable designed for use with the MD615 and MD625 series DMR mobile radios.
-
Sojet MoEco Printhead CableSKU: PC43HYTERA$ 59.86
PC43 DB26-Connector dispatching cable
For Hytera MD700 Series Digital Mobile Radios.
-
Sojet MoEco Spare PrintheadSKU: PC47HYTERA$ 97.75
PC47 Download and Programming Cable
For Hytera MD700 Series Digital Mobile Radios.
-
Encoder cable, DB15 To Sick Connector; 2M Standard LengthSKU: BC00004HYTERA$ 90.17
Complete programming kit for the Hytera MD785 DMR mobile radio.
-
Fork Sensor & Cable for SojetSKU: PC40HYTERA$ 97.64
PC40 Data Transmission Cable (RoHS)
For Hytera MD700 Series Mobile Digital Radio.
-
Positioning Rail for B80/B85 printerSKU: PC37HYTERA$ 77.39
PC37 Programming Cable (USB Port) (RoHS)
For Hytera MD700 Series Mobile Digital Radios.
-
Diffuse Sensor & Cable for SojetSKU: SK008HYTERA$ 94.91
Includes programming software and interface lead for Hytera MD785 mobile radios.
-
Sojet DVI – DB9 Accessory Connection BoxSKU: PC87HYTERA$ 46.45
Back-to-back Data Cable with Ignition Function (DB26 to DB26), 0.6m Length
-
Sojet MoEco EncoderSKU: PC91HYTERA$ 94.91
Data Cable (DB26 connector with Ignition and Speaker cable), 3m Length
-
Spare Sojet V2N Print HeadSKU: PC70HYTERA$ 95.63
Data cable for Hytera MD785i DMR mobile radio with a DB26 to DB9 connector. Cable length 1.2 metres.
-
Sojet MoEco DVI – DB9 Accessory Connection BoxSKU: POA108HYTERA$ 47.62
Hytera MD785i DMR mobile radio data cable with DB26 to DB9 male connector. Cable length 1.2 metres.
-
Sick Encoder Bracket. Heavy Duty, Torsion Spring.SKU: RC07HYTERA$ 94.91
A recording cable terminated at one end by a DB26 connector and RJ11 at the other end. Cable length is 1.2 metres.
-
Sick Programable Encoder For <=200M/MinSKU: PC85HYTERA$ 98.05
Programming Cable (USB to 10-pin Aviation Connector) (with signal amplification) 1.5m Length
-
Stacked Beacon Ink Alarm for Sojet MoEcoSKU: PC80HYTERA$ 95.25
USB to Micro USB programming cable for the Hytera MD785i DMR radio. Cable length is 1.5 metres.
-
4pcs Set Shuttle Race guide Shaft (Complete)SKU: PC39HYTERA$ 27.29
Data transmission cable (PEI). Also used for firmware upgrade of the radio mother board.
-
Bobbin Case Spring screwSKU: PC68HYTERA$ 0.55
An extra long [5 metres] USB data cable for the Hytera MT680 Plus TETRA radio.
-
Brother Foot controlSKU: PC35HYTERA$ 27.29
USB style programming cable also used for firmware upgrades to the Hytera MT680 Plus radio. Operates via the front panel.
-
Domestic Machine feed gear setSKU: SK003HYTERA$ 6.02
Includes the PC69 cable and software.
Suitable for the Hytera PD3 series portable radios.
-
Storm and Cyclone Replacement NutsSKU: PC69HYTERA$ 1.73
The PC69 programming lead allows you to change the operating frequencies and other parameters of the PD355 and PD365 digital migration radio.
-
Electric Quad Bike Brake PadsSKU: SK004HYTERA$ 5.89
Includes the PC76 programming cable and software.
Suitable for the Hytera PD4 and PD5 DMR portable radios.
-
Replacement Charging PortSKU: PC76HYTERA$ 11.85
Connects Hytera PD400 series radios to PC via USB port for programming.
-
Drive Shaft CV Boot for Explorer GTSKU: SK005HYTERA$ 11.85
Hytera PD5 series programming kit comprising PC63 cable and software.
-
Electric Quad Bike Brake CalliperSKU: PC63HYTERA$ 14.23
Programming cable for the Hytera PD505 and PD565 digital portable radios.
-
Electric Variable Speed Thumb ThrottleSKU: SK006HYTERA$ 15.42
Hytera PD6 Series Programming Kit. Includes software and PC45 cable
-
Electric Variable Speed ThrottleSKU: PC38HYTERA$ 17.80
Connects the radio to a PC to allow programming of the Hytera PD705 and PD785 digital portable radios.
-
MoEco DVI to DB9 encoder/photocell connection cableSKU: SK007HYTERA$ 15.48
For use with The Hytera PD715Ex and PD795Ex ATEX approved portable radios.
Includes software and interface lead.
-
Sojet MoEco Printhead CableSKU: PC143HYTERA$ 59.86
Hytera PNC550 Data Cable. USB to Type C. 1 metre length
-
-
-
Fork Sensor & Cable for SojetSKU: PC64HYTERA$ 97.64
PC programming cable for updating configuration of the Hytera PT580H TETRA radio terminal.
-
Positioning Rail for B80/B85 printerSKU: PC36HYTERA$ 77.39
A PC programming cable with virtual USB port for the Hytera PT580H Plus TETRA radio terminal.
-
Diffuse Sensor & Cable for SojetSKU: PC90HYTERA$ 94.91
A serial to USB adapter cable to allow programming of the Hytera PT580H Plus TETRA radio terminal.
-
Sojet DVI – DB9 Accessory Connection BoxSKU: PC67HYTERA$ 46.45
USB programming cable for the Hytera PT790Ex I.S TETRA radio terminal.
-
Sojet MoEco EncoderSKU: SK009HYTERA$ 94.91
Hytera RD625 programming Kit. Programming kit includes PC75 cable and software. For programming and configuring the RD625 DMR repeater.
-
Spare Sojet V2N Print HeadSKU: PC75HYTERA$ 95.63
Hytera RD625 programming lead. Order programming software [SK008] separately.
-
Sojet MoEco DVI – DB9 Accessory Connection BoxSKU: BC00005HYTERA$ 47.62
Programming kit (programming cable PC37 + Disc)for RD96 Series Digital Repeaters.
-
Sick Encoder Bracket. Heavy Duty, Torsion Spring.SKU: PC49HYTERA$ 94.91
Back to back data cable for RD96 Series Digital Repeaters.
-
Sick Programable Encoder For <=200M/MinSKU: PC30HYTERA$ 98.05
Programming Cable with USB Connector.
-
Stacked Beacon Ink Alarm for Sojet MoEcoSKU: PC93HYTERA$ 95.25
The PC93 programming cable allows users to reprogram the Hytera VM685 remote video speaker microphone.
-
4pcs Set Shuttle Race guide Shaft (Complete)SKU: BC00008HYTERA$ 27.29
Programming software and lead for the Hytera X1 and X1p covert digital radios.
-
Bobbin Case Spring screwSKU: PC45HYTERA$ 0.55
Programs the Hytera X1e and X1p digital portable radios.
-
Brother Foot controlSKU: OPC-592ICOM$ 27.29
The OPC-591 cloning cable adapter requires the OPC478 cloning cable. It is compatible with the ICOM IC-A110 air band and IC-F7000 HF radios.
-
Domestic Machine feed gear setSKU: OPC-1529ICOM$ 6.02
The OPC-1529 connection cable (RS-232C type) is compatible with the ICOM IC-E91 portable radio.
-
Storm and Cyclone Replacement NutsSKU: OPC-478UCICOM$ 1.73
OPC-478UC USB Cloning Lead USB Port to Radio. Used on most ICOM mobile and portable radios.
-
Electric Quad Bike Brake PadsSKU: OPC-1122ICOM$ 5.89
OPC-1122 programming cable for all ICOM mobile radios with an RJ45 8 pin microphone socket.
Suitable for a range of ICOM mobile radios including the IC-F110 and IC-F210 models.
-
Replacement Charging PortSKU: OPC-822ICOM$ 11.85
ICOM IC-F1610 and IC-F1710 mobile radio interface cable for MAP 27.
-
Drive Shaft CV Boot for Explorer GTSKU: OPC-474ICOM$ 11.85
The OPC-474 cloning cable is compatible with a range of ICOM radios.
-
Electric Quad Bike Brake CalliperSKU: OPC-1862ICOM$ 14.23
USB style programming cable for ICOM IC-F3202DEx and IC-F4202DEx portable radios. Requires CSF3200DEX.001 software supplied separately.
-
Electric Variable Speed Thumb ThrottleSKU: OPC-1870ICOM$ 15.42
Permits radio data transfer between 2 portable radios including the ICOM IC-F3262D/4262D series portable radios.
-
Electric Variable Speed ThrottleSKU: OPC-1871ICOM$ 17.80
For transferring date from portable radio to mobile radios. Compatible with ICOM IC-F3262D/4262D series portable radios.
-
MoEco DVI to DB9 encoder/photocell connection cableSKU: OPC-2362ICOM$ 15.48
The OPC-2362 lets you easily transfer radio data from a ICOM IC-F3400D series IDAS portable radio to a ICOM IC-F5400D series IDAS mobile radio.
-
Sojet MoEco Printhead CableSKU: OPC-1122UICOM$ 59.86
The OPC-1122U USB cloning cable is compatible with the ICOM IC-F5022 mobile radio and IC-FR5100 series base station repeater.
-
Sojet MoEco Spare PrintheadSKU: OPC-966.002ICOM$ 97.75
The OPC-966.002 cloning lead is compatible with a range of ICOM radios.
-
Encoder cable, DB15 To Sick Connector; 2M Standard LengthSKU: OPC-2218LUICOM$ 90.17
Suitable for the ICOM IC-F5122DD/6122DD data modem.
-
-
Positioning Rail for B80/B85 printerSKU: OPC2338ICOM$ 77.39
Change radio parameters and configuration with the OPC2338 programming cable. Requires CSF52D programming software [sold separately].
-
Diffuse Sensor & Cable for SojetSKU: OPC-966.001ICOM$ 94.91
The OPC-966.001 serial cloning cable is compatible with the ICOM IC-F61M and IC-F51V series radio.
-
Sojet DVI – DB9 Accessory Connection BoxSKU: OPC-2091ICOM$ 46.45
OPC-2091 Cloning Cable Adapter for IC-M23
-
-
Spare Sojet V2N Print HeadSKU: OPC-1655ICOM$ 95.63
The OPC-1655 cable adapter is compatible with the ICOM IC-M33 marine radio. It is for use with the OPC-478/UC cloning cable.
-
Sojet MoEco DVI – DB9 Accessory Connection BoxSKU: OPC-980ICOM$ 47.62
The OPC-980 cloning cable adapter is compatible with the ICOM IC-GM651, IC-M505 and IC-M603 marine mobile radios.
-
Sick Encoder Bracket. Heavy Duty, Torsion Spring.SKU: OPC-2382ICOM$ 94.91
ICOM IC-M605E Conversion Cable. The OPC-2382 is a programming conversion cable that is used with the OPC-478UC cable [USB].
-
Sick Programable Encoder For <=200M/MinSKU: OPC-922ICOM$ 98.05
The OPC-922 cloning cable adapter is compatible with the ICOM IC-M71, IC-GM1600E and IC-M90E marine radios.
-
Stacked Beacon Ink Alarm for Sojet MoEcoSKU: CS-R20ICOM$ 95.25
The CS-R20 cloning software is supplied with a USB cloning cable. It is compatible with the ICOM IC-R20 air band radio.
-
4pcs Set Shuttle Race guide Shaft (Complete)SKU: OPC-1402ICOM$ 27.29
Maintenance cable suitable for use with the ICOM IP1000C Advanced Radio system server.
-
Bobbin Case Spring screwSKU: KPG-36XMKENWOOD$ 0.55
Programming cable for the Kenwood NX-5200/5300 NXDN/P25 digital portable radios. Requires KPG-D1E programming software.
-
Brother Foot controlSKU: KPG-46XMKENWOOD$ 27.29
Suitable for use with Kenwood NX-5700/NX-5800 multi mode mobile radios. Requires programming software – KPG-D1E [sold separately].
-
Domestic Machine feed gear setSKU: KPG-46UKENWOOD$ 6.02
Kenwood USB programming lead for the following Kenwood radios:-
– NX-700/NX-800
– NX-720/NX-820
– NXR-710/NXR-810
– TKR-D710/TKR-D810
-
Storm and Cyclone Replacement NutsSKU: KPG-46AKENWOOD$ 1.73
The KPG-46A programming kit is compatible with a range of Kenwood mobile radios and base stations.
-
Electric Quad Bike Brake PadsSKU: KCT-53UKENWOOD$ 5.89
The KCT-53U serial to USB adapter is compatible with a range of Kenwood radios and base stations and is supplied with drivers.
-
Replacement Charging PortSKU: KPG-22UKENWOOD$ 11.85
Suitable for programming a range of Kenwood portable radios with the Kenwood 2 pin accessory socket.
-
Drive Shaft CV Boot for Explorer GTSKU: KPG-22AKENWOOD$ 11.85
The KPG-22A serial programming cable is compatible with the Kenwood TK-3301, TK-3201, TK-2202 series, TK-2170 series and TK-2302 series portable radios.
-
Electric Quad Bike Brake CalliperSKU: KPG-186UKENWOOD$ 14.23
Programming lead for use with the Kenwood TK-3601D licence free digital radio.
-
Electric Variable Speed Thumb ThrottleSKU: KPG-36AKENWOOD$ 15.42
Serial programming lead for use with Kenwood TK-D series portable radios. Should be used with KPG-166DM software [sold separately].
-
Electric Variable Speed ThrottleSKU: KPG-36UKENWOOD$ 17.80
USB programming cable for Kenwood TK-D series portable radios. Requires KPG-166DM programming software.
-
MoEco DVI to DB9 encoder/photocell connection cableSKU: PR-SL1000-01MAXON$ 15.48
Programming cable and software suitable for the Maxon SL1000 portable radio.
-
Sojet MoEco Printhead CableSKU: PK-SL1000-02MAXON$ 59.86
Permits radio data to be transferred from radio to radio. Suitable for Maxon SL1000/S5.
-
Sojet MoEco Spare PrintheadSKU: PRG-G15MIDLAND$ 97.75
Programming kit including software for Midland G18. Required to enable the voice compander and FM radio functions.
-
Encoder cable, DB15 To Sick Connector; 2M Standard LengthSKU: HKKN4027AMOTOROLA$ 90.17
Change the configuration of your Motorola CLPe two way radio with the HKKN4027A cable kit.
-
Fork Sensor & Cable for SojetSKU: HKKN4028AMOTOROLA$ 97.64
Transfer your radio configuration to other Motorola CLPe two way radios with the HKKN4028A cloning cable.
-
Positioning Rail for B80/B85 printerSKU: FKN8113AMOTOROLA$ 77.39
Suitable for use with the Motorola CM series mobile radio models.
-
Diffuse Sensor & Cable for SojetSKU: FKN8096BMOTOROLA$ 94.91
Flash upgrade adapter for Motorola CM140; CM160; CM340; CM360 mobile radios.
-
Sojet DVI – DB9 Accessory Connection BoxSKU: RKN4081CMOTOROLA$ 46.45
Avoids the need for the RLN4008 RIB box when programming CM and GM series mobile radios.
-
Sojet MoEco EncoderSKU: RKN4083BMOTOROLA$ 94.91
Connects the Motorola CM or GM series mobile radio to the RIB box
-
Spare Sojet V2N Print HeadSKU: PMKN4004MOTOROLA$ 95.63
Suitable for programming Motorola CP040 series portable radios.
-
Sojet MoEco DVI – DB9 Accessory Connection BoxSKU: 0180305K08EPPMOTOROLA$ 47.62
Suitable for CP & DP Series radios.
-
Sick Encoder Bracket. Heavy Duty, Torsion Spring.SKU: PMKN4003BMOTOROLA$ 94.91
2.5mm connectors – suitable for radio to radio cloning between Motorola CP040 portable radios.
-
Sick Programable Encoder For <=200M/MinSKU: 6686533Z01MOTOROLA$ 98.05
Service tool for use with the Motorola CP and DP1000 series portable radios
-
Stacked Beacon Ink Alarm for Sojet MoEcoSKU: PMKN4072AMOTOROLA$ 95.25
For connection via front microphone socket on Motorola DM series radios.
-
4pcs Set Shuttle Race guide Shaft (Complete)SKU: PMKN4016BMOTOROLA$ 27.29
For connection to Motorola DM series radios or test box.
-
Bobbin Case Spring screwSKU: PMKN4010BMOTOROLA$ 0.55
For programming Motorola DM series radios via rear facility connector.
-
Brother Foot controlSKU: PMKN4147AMOTOROLA$ 27.29
Connects to the microphone socket on the DM1000 control head for radio programming.
-
Domestic Machine feed gear setSKU: HKN6184CMOTOROLA$ 6.02
Allows programming of Motorola DM3000 series mobile radios via the microphone socket on the control head.
-
Storm and Cyclone Replacement NutsSKU: PMKN4040AMOTOROLA$ 1.73
Telemetry cable suitable for Motorola DP3000 and DP4000 portable radios.
-
Electric Quad Bike Brake PadsSKU: PMKN4156AMOTOROLA$ 5.89
Test cable for use with Motorola DP series digital DMR radio models.
-
Replacement Charging PortSKU: 3271133M01MOTOROLA$ 11.85
Used on Motorola DP series digital portable radios to seal the vacuum hose to radio chassis connection.
-
Drive Shaft CV Boot for Explorer GTSKU: 5871134M01MOTOROLA$ 11.85
Connects the vacuum hose to the radio chassis. Compatible with the Motorola DP series portable radios.
Used to re pressure the radio and seal the unit after maintenance.
-
Electric Quad Bike Brake CalliperSKU: NTN4265AMOTOROLA$ 14.23
Pressure pump for re pressurising the following Motorola radio series after servicing:-
DP2400; DP2600
DP3400; DP3600
DP4400; DP4600;DP4800
GP344/GP388
-
Electric Variable Speed Thumb ThrottleSKU: NLN9839AMOTOROLA$ 15.42
Includes gauge and hose. Order seal and connector separately.
Used with Motorola DP and GP Compact series radios.
-
Electric Variable Speed ThrottleSKU: PMKN4115BMOTOROLA$ 17.80
Programming cable for Motorola DP2400 and DP2600 digital radio models.
-
MoEco DVI to DB9 encoder/photocell connection cableSKU: PMKN4071AMOTOROLA$ 15.48
Enables the MOTOTRBO portable radio to be connected to an external non-PC based application.
-
Sojet MoEco Printhead CableSKU: PMKN4012MOTOROLA$ 59.86
DMR portable radio programming cable, compatable with the DP3000 portable radio range
-
Sojet MoEco Spare PrintheadSKU: PMKN4117BMOTOROLA$ 97.75
Used when programming the Motorola DP2400; DP2600 and DP3441 compact series radios.
-
Encoder cable, DB15 To Sick Connector; 2M Standard LengthSKU: GTF374CMOTOROLA$ 90.17
Connects the radio to the RIB box for programming the Motorola GM series mobile radios.
-
Fork Sensor & Cable for SojetSKU: 6686119B01MOTOROLA$ 97.64
Designed to help with dismantling the Motorola GM series mobile radios.
-
Positioning Rail for B80/B85 printerSKU: RKN4074MOTOROLA$ 77.39
Compatible for use with the Motorola Professional range of portable radios. Used with RLN4008 RIB box.
-
Diffuse Sensor & Cable for SojetSKU: 6680702Z01MOTOROLA$ 94.91
Special dismantling tool used with the Motorola GP series portable radios.
-
Sojet DVI – DB9 Accessory Connection BoxSKU: RKN4075MOTOROLA$ 46.45
Eliminates the need for the RLN4008 RIB box when programming Motorola GP series radios.
-
Sojet MoEco EncoderSKU: RLN4008MOTOROLA$ 94.91
Radio Interface Box [RIB] for use when programming Motorola GP and CP series portable radios.
-
Spare Sojet V2N Print HeadSKU: HLN9742DMOTOROLA$ 95.63
Used to flash upgrade the firmware on Motorola GP and GM series radios.
-
Sojet MoEco DVI – DB9 Accessory Connection BoxSKU: EPN4042AMOTOROLA$ 47.62
Powers the radio interface box [RIB] instead of batteries. Used when programming Motorola GP/GM/CP and CM series radios.
-
Sick Encoder Bracket. Heavy Duty, Torsion Spring.SKU: MDJMKN4125AMOTOROLA$ 94.91
Allows you to power the Motorola GP344 or GP388 GP compact series portable radios from an external power supply.
-
Sick Programable Encoder For <=200M/MinSKU: MDJMKN4123MOTOROLA$ 98.05
Programming and test cable for the Motorola GP344 and GP388 radio models.
-
-
4pcs Set Shuttle Race guide Shaft (Complete)SKU: DDN9957AMOTOROLA$ 27.29
Programming cable suitable for MTR3000 base stations.
-
Bobbin Case Spring screwSKU: PMDN4077ARMOTOROLA$ 0.55
The PMDN4077AR programming cable is compatible with the Motorola P100 series portable radios.
-
Brother Foot controlSKU: PMDN4076ARMOTOROLA$ 27.29
The PMDN4076AR cloning cable is compatible with the Motorola P100 series portable radios.
-
Domestic Machine feed gear setSKU: PMKN4265AMOTOROLA$ 6.02
Motorola R7 Programming Cable. Suitable for configuring the Motorola R7 portable radio. Use with GMVN6241 CPS software.
-
Storm and Cyclone Replacement NutsSKU: PMKN4231AMOTOROLA$ 1.73
Motorola R7 Test/Alignment Cable. A test and alignment cable suitable for use with the Motorola R7 DMR portable radio.
-
Electric Quad Bike Brake PadsSKU: 3080369B72MOTOROLA$ 5.89
Connects RLN4008 RIB to PC for programming GP and CP Series radios
-
Replacement Charging PortSKU: PMKN4128AMOTOROLA$ 11.85
Portable programming cable with TTR for the Motorola SL and DP Series of digital portable radios.
-
Drive Shaft CV Boot for Explorer GTSKU: 30009477001MOTOROLA$ 11.85
Programming and test cable for Motorola SLR5500 base station. Requires programming software [sold separately] – 30009477001
-
Electric Quad Bike Brake CalliperSKU: HKKN4027MOTOROLA$ 14.23
Allows programming of the XT420 and XT460 with the HTML based customer programming software.
-
Electric Variable Speed Thumb ThrottleSKU: HKKN4028MOTOROLA$ 15.42
Allows data to be transferred between radios. Suitable for the XT420 and XT460 PMR446 licence free radios.
-
Electric Variable Speed ThrottleSKU: IXEN4007ARMOTOROLA$ 17.80
The IXEN4007AR USB programming kit is compatible with the Motorola XTNi and XTNiD licence free radios.
-
MoEco DVI to DB9 encoder/photocell connection cableSKU: 25-124330-01RMOTOROLA$ 15.48
Motorola programming cable with micro USB. Requires programming software GMVN5141 [sold separately]
-
-
Sojet MoEco Printhead CableSKU: CX9PPSCOPE$ 59.86
Complete programming kit suitable for the Scope Connexions advanced paging transmitter/encoder.
-
-
-
Scope Pagetek 4 Programming Kit
SKU: PT10PROGSCOPE£26.00Includes programming software and interface lead [USB] to allow you to reconfigure the Scope Pagetek 3 and 4 paging transmitters.
-
Fork Sensor & Cable for SojetSKU: MAR-600PRLDUSIMOCO$ 97.64
MAR-600PRLDU Mobile Programming Cable for the Simoco SDM610, SDM622 and SDM630 Digital Mobile Radios.
-
-
Diffuse Sensor & Cable for SojetSKU: 7A0D100SZG1SIMOCO$ 94.91
For programming and reconfiguring the Simoco SDM730 Advanced DMR mobile radio.
-
Sojet DVI – DB9 Accessory Connection BoxSKU: 5A0DS00SZG1SIMOCO$ 46.45
Simoco SDP560 Programming Lead
-
Sojet MoEco EncoderSKU: GA0M500SZG1SIMOCO$ 94.91
Simoco SDP660 Programming lead suitable for use with either the Simoco SDP650 and SDP660 DMR radios or the SRP9170.
-
Spare Sojet V2N Print HeadSKU: 7A0M500SZG1SIMOCO$ 95.63
Simoco SDP750 and SDP760 programming cable. Allows you to reconfigure radio parameters via a PC.
-
Sojet MoEco DVI – DB9 Accessory Connection BoxSKU: MA-PROGSIMOCO$ 47.62
The MA-PROG programming kit is compatible with the Simoco SRM9000 series mobile radio/base station.
-
Sick Encoder Bracket. Heavy Duty, Torsion Spring.SKU: PAR-9180PRLDUSIMOCO$ 94.91
The PAR-9180PRLDU USB programming lead is compatible with the Simoco SRP9000 series portable radios including the SRP9170 and SRP9180 models.
-
Sick Programable Encoder For <=200M/MinSKU: TSF-PROGSIMOCO$ 98.05
The TSF-PROG programming kit is compatible with the Simoco TSFLite and TSF2000 series base stations.
-
Stacked Beacon Ink Alarm for Sojet MoEcoSKU: MAR-9000PRLDUSIMOCO$ 95.25
Programming lead suitable for the Simoco SRM, TSF and Xfin radio products.
-
4pcs Set Shuttle Race guide Shaft (Complete)SKU: TMAA21-01TAIT$ 27.29
The TMAA21-01 cable socket (DB15) to plug (RJ45) is compatible with the Tait TM8000, TM8000 XB and T-S8107 series mobile radios.
-
Bobbin Case Spring screwSKU: TMAA20-00TAIT$ 0.55
The TMAA20-00 programming kit is compatible with the Tait TM8000, TM8000 CB and T-S8107 series mobile radios.
-
Brother Foot controlSKU: TMAA30-03TAIT$ 27.29
The TMAA30-03 adapter connects the RJ45 to the DB15. Compatible with the Tait TM8000, TM8000 XB and T-S8107 series mobile radios.
-
Domestic Machine feed gear setSKU: TMAA20-02TAIT$ 6.02
The TMAA20-02 adapter connects the RJ45 to the DB9. Compatible with the Tait TM8000, TM8000 XB and T-S8107 series mobile radios.
-
Storm and Cyclone Replacement NutsSKU: TMAA21-00TAIT$ 1.73
The TMAA21-00 service kit is compatible with the Tait TM8000, TM8000 XB and T-S8107 series mobile radios. Supplied with product support CD, service manual, programming/calibration leads and radio test unit.
-
Electric Quad Bike Brake PadsSKU: TMAA20-04TAIT$ 5.89
The TMAA20-04 socket/plug adapter is compatible with the Tait TP8100, TM8000, TM8000 XB and T-S8107 series portable/mobile radios.
-
Replacement Charging PortSKU: T02-00031-0001TAIT$ 11.85
Tait TM81/82/93/TP81/93 Programming & Calibration Kit. Suitable for use with the Tait TP8 analogue, TP9 digital and TM8000 series mobile radios.
-
Drive Shaft CV Boot for Explorer GTSKU: TPA-SV-006TAIT$ 11.85
The TPA-SV-006 radio programming lead is compatible with the Tait TP8100 series portable radios & TM8000 mobile radios.
-
-
-
-
MoEco DVI to DB9 encoder/photocell connection cableSKU: TTI-PROGTTI$ 15.48
Complete programming kit for the TTi TX1000U licence free portable radio.
-
Sojet MoEco Printhead CableSKU: CB000262A01VERTEX$ 59.86
USB programming lead for the Vertex EVX-S24 digital radio.
Software included.
-
-
Encoder cable, DB15 To Sick Connector; 2M Standard LengthSKU: CT-27VERTEX$ 90.17
The CT-27 cloning cable is compatible with a range of Yaesu Vertex/Standard portable radios.
-
Fork Sensor & Cable for SojetSKU: FIF-12VERTEX$ 97.64
The FIF-12 USB interface adapter and leads is for use with the CT-106 programming cable. Used with various Vertex VX Series portable radios.
-
Positioning Rail for B80/B85 printerSKU: FIF-10AVERTEX$ 77.39
The FIF-10A USB interface cable is for use with the CT-105/106/108 programming cable interface and is compatible with a range of Yaesu Vertex/Standard mobile and portable radios.
-
Diffuse Sensor & Cable for SojetSKU: SVC-1200VERTEX$ 94.91
The SV-1200 service kit is compatible with the Vertex/Standard VX-1210 transceiver.
-
Sojet DVI – DB9 Accessory Connection BoxSKU: CT-62/CE-77VERTEX$ 46.45
Complete programming kit for the Vertex VX-1700 HF radio models.
-
-
Spare Sojet V2N Print HeadSKU: CT-104AVERTEX$ 95.63
Also suitable for VX-4100/4200 mobile radios. Connects to FIF-10A
-
Sojet MoEco DVI – DB9 Accessory Connection BoxSKU: CT-126VERTEX$ 47.62
Programming cable suitable for Vertex radios:-
– VX-2100
– VX-2200
– VX-4100
– VX-4200
-
Sick Encoder Bracket. Heavy Duty, Torsion Spring.SKU: CT-106VERTEX$ 94.91
The CT-106 programming cable interface is for use with the FIF-10A USB interface adapter and is compatible with a range of Yaesu Vertex/Standard portable radios.
-
Sick Programable Encoder For <=200M/MinSKU: CT-42VERTEX$ 98.05
The CT-42 programming cable is compatible with a range of Yaesu Vertex/Standard portable radios.
-
Stacked Beacon Ink Alarm for Sojet MoEcoSKU: CT-124BVERTEX$ 95.25
CT-124B Vertex VX-410 Firmware Update Lead
-
4pcs Set Shuttle Race guide Shaft (Complete)SKU: FIF-8VERTEX$ 27.29
FIF-8 Vertex VX-410 Flash ROM Writer
-
Bobbin Case Spring screwSKU: VPL-1VERTEX$ 0.55
The VPL-1 programming kit is compatible with the Yaesu Vertex/Standard VX-4100E series mobile radios.
-
Brother Foot controlSKU: CT-153VERTEX$ 27.29
Allows cloning from mobiles to portables via accessory/programming socket. Suitable for Vertex VX-450, VX-454 and VX-459 portable radios.
-
Domestic Machine feed gear setSKU: CT-72VERTEX$ 6.02
The CT-72 radio clone cable is compatible with the Yaesu Vertex/Standard VX-5500 mobile radio.
-
Storm and Cyclone Replacement NutsSKU: CT-70VERTEX$ 1.73
The CT-70 radio programming cable interface is for use with the CT-29 programming cable PC interface. Compatible with the Yaesu Vertex/Standard VX-5500 mobile radio.
-
Electric Quad Bike Brake PadsSKU: CT-105VERTEX$ 5.89
The CT-105 programming cable interface is for use with the FIF-10A USB interface adapter and is compatible with the Yaesu Vertex/Standard VX-5500 mobile radio.
-
Replacement Charging PortSKU: VX-VPL-1DVERTEX$ 11.85
The VX-VPL-1D programming kit is compatible with the Yaesu Vertex/Standard VX-7000 and VX-9000 base stations.
-
Drive Shaft CV Boot for Explorer GTSKU: CT-109VERTEX$ 11.85
The CT-109 programming cable kit is compatible with the Yaesu Vertex/Standard VX-920E series portable radio.
-
Electric Quad Bike Brake CalliperSKU: CT-108VERTEX$ 14.23
The CT-108 programming cable interface is for use with the FIF-10A USB interface adapter and is compatible with the Yaesu Vertex/Standard VX-920E series portable radio.
-
Electric Variable Speed Thumb ThrottleSKU: CT-116VERTEX$ 15.42
The CT-116 radio clone cable is compatible with the Yaesu Vertex/Standard VX-920E series portable radio.
-
Electric Variable Speed ThrottleSKU: CT-4VERTEX$ 17.80
The CT-4 cloning cable is compatible with the Yaesu Vertex/Standard VX-4100E and VX-2100E series mobile radios.
-
MoEco DVI to DB9 encoder/photocell connection cableSKU: CT-150VERTEX$ 15.48
Connects PC to rear of Vertex VXD series mobile radios and base stations for programming.
-
Sojet MoEco Printhead CableSKU: CT-151VERTEX$ 59.86
For test and alignment of VXD mobile radios/base stations.
Connects PC to rear of radio.